Why can t my YY speak Mai is good

It is estimated that the headphones are a little bad.

It may be that there is a problem with the button, usually pressing F2 to speak.

Here's how to use key-to-talk and mouse-to-talk:

YY sets the button to speak.

1. After logging in to YY, enter a YY channel casually, and then you will find that there is a "I want to go to the microphone" button at the bottom of the panel, click the button.

2. After microphone on, you will find that there is a "Hold F2 to speak" button at the bottom left of the panel, indicating that this is the default speech button.

<>4. A dialog box will pop up after clicking, and you can see that there is an input box behind "key speech" by default, "F2"."If you want to modify it, enter the key you want to modify in the input box, and if you want to modify it to "1", then enter 1.

5. After entering 1, close the dialog box, and then return to the chat dialog, at this time, you can see that "press and hold 1 to speak" will be displayed at this time. At this time, it means that the default speech key has been changed to 1, no longer F2.

YY settings to press the mouse to speak.

1. If you don't want to use the button to speak, but want to use the mouse, then when the fourth step appears, click "Press the mouse to speak.""Options.

YY voice microphone speaks without sound Hello dear, 011, when there is no sound in the recording, first of all, let's check whether our interface is normalThe headset generally has two wires, one connected to the audio and one connected to the microphone. 02 There is a description of the interface on the headset cable interface, and there is a microphone logo on the microphone, and the audio interface has a headphone logo on it. 03According to the interface instructions on the computer, the red interface is generally connected to the microphone, and the green interface is generally connected to the headphone sound source.

04After connecting, test whether you can hear the sound and record. If that doesn't work, right-click on the volume option on your computer's desktop. 05 Click on the recording device on the page that appears to enter the recording device settings panel.

06 In the recording settings panel, you can see that the microphone above is disabled, click the microphone with the right mouse button, and click "Enable" in the column that appears. 07 After seeing a green tick appear in front of the microphone, it means that the microphone is successfully enabled, and then click the OK button below to save it to start your own recording journey. 08If you find that the microphone recording sound is low or there is no sound after recording. In the Microphone Settings option, tap Select Microphone, and then tap Properties in the bottom right corner.

09On the Microphone Properties page, click on the Level option in the middle. Below, you'll find the recording volume setting for the microphone. Click on the speaker icon behind the microphone and pull the progress bar to the maximum.

When you're done, click OK below. Hope it helps. If my answer is helpful to you, please give a thumbs up (in the lower left corner), I look forward to your like, your efforts are very important to me, and your support is also the motivation for my progress.

Finally, I wish you good health and a good mood!

The specific causes and solutions are as follows:

1. First of all, you should confirm whether the microphone and handset equipment have hardware failures.

<>3. Then enter the personal panel of YY voice and click the "System Settings" button below.

<>5. Click the "Audio Settings" option button in the window.

6. Adjust the microphone and speaker to the maximum, click on the three options under the sound quality setting option, and finally click OK.

7. Click the "Sound Prompt" option on the system settings panel, and check whether the option "Turn off all sound prompts" is checked in the Sound Prompt option, if it is checked, click it again to uncheck. So that you can hear the sound.

When using YY voice to communicate with others, you may have experienced the situation that others can't hear when you speak, or you can't hear others when you speak, which is probably because your microphone has some problems, we can try to do the following.

Method:

The first thing we should check is whether our microphone and handset equipment has a hardware failure.

After confirming that it is not the fault of the microphone and earpiece, we return to the lower right corner of the computer desktop to check the sound icon, click to check whether mute is turned on, that is, check whether the position of the icon is a small red icon.

Then we go to the personal panel of the self-coarse sliding voice and click the "System Settings" button below.

After entering the voice options window, here we click on the "Audio Settings" option button in the right window, and in the audio settings window that opens, we adjust the microphone and speaker to the maximum, and click on the three options under the sound quality setting options, and finally click OK.

Also, we click on the "Sound Prompt" option on the system settings panel, and check the "Turn off all sound lead reminders" option in the Sound Prompt option to see if the option is selected, and if so, click Cancel.

Voice settings - microphone settings, set to the microphone you use One by one to listen to whether there is sound, if not, set the following speakers, I hope to help you, hope to adopt.

1. Sound card driver.

2. You may enter the selected mix, and it should be fine to adjust it to the microphone, and the reverb in the red box behind it, if you check it, please cancel it.

3. When inserting headphones or microphones, some motherboards have prompts; If there is no prompt, you can open Start - Program - Control Panel - Sound and Devices - Realtek Manager, then plug in the headphones and microphone, see the prompt, and select the corresponding panel socket.

YY Settings Voice Settings Audio Device, choose your own microphone device, if you use the default main sound capture driver, you will be pitted by YY. There was a sound, but it was about the same size as a mosquito.

System problems I used to install the system, and after yy couldn't speak, adjust the yy settings.

Because it has to be the same as your QQ input and output.

It may be that there is a problem with the button, usually pressing F2 to speak.

Here's how to use key-to-talk and mouse-to-talk:

YY sets the button to speak.

1. After logging in to YY, enter a YY channel casually, and then you will find that there is a "I want to go to the microphone" button at the bottom of the panel, click the button.

2. After microphone on, you will find that there is a "Hold F2 to speak" button at the bottom left of the panel, indicating that this is the default speech button.

<>4. A dialog box will pop up after clicking, and you can see that there is an input box behind "key speech" by default, "F2"."If you want to modify it, enter the key you want to modify in the input box, and if you want to modify it to "1", then enter 1.

5. After entering 1, close the dialog box, and then return to the chat dialog, at this time, you can see that "press and hold 1 to speak" will be displayed at this time. At this time, it means that the default speech key has been changed to 1, no longer F2.

YY settings to press the mouse to speak.

1. If you don't want to use the button to speak, but want to use the mouse, then when the fourth step appears, click "Press the mouse to speak.""Options.

Reasons why YY can't speak or can't hear talk:

1.Microphone itself or setting issue.

2.Sound card driver issues or improper sound card settings.

3.Problems with audio adjustments.

Solution: First of all: Please check whether your microphone is in the correct position, and try both the front and back microphones.

Secondly: click Start - Programs - Accessories - Entertainment - Audio Recorder, use whether there is sound or you can click on our sound card settings above the crooked chat window, can you hear your own voice If you can't hear the sound, then please check if your sound input and output device is intact.

Check if it's a problem with the software itself If the software is fine, check the microphone of the computer to see if the driver is normal and whether the hardware is normal.

If you don't press the button to speak automatically, if it doesn't work, there's something wrong with the microphone.

Microphone itself or setting issue.

Sound card driver issues or improper sound card settings.

Problems with audio adjustments.