What are the structures of the house? How to tell the difference?

The architectural structure of the house.

1. Brick and wood structure (residential): refers to the use of bricks or blocks for the walls and columns of the vertical load-bearing structure in the building, and the timber structure for floor slabs and roof trusses.

2. Brick-concrete structure.

Residential): The walls and columns of the vertical load-bearing structure in the building are made of bricks or blocks, and the columns, beams, floor slabs, roof panels, etc. are made of reinforced concrete.

In layman's terms, brick-concrete structures are load-bearing with a small portion of reinforced concrete and most of the brick walls.

3. Reinforced concrete (residential): refers to the main load-bearing structures in the building, such as walls, columns, beams, floors, floors, roof panels, etc., which are made of reinforced concrete, and the non-load-bearing walls are filled with bricks or other materials. This structure has good seismic performance, strong integrity, strong fire resistance, durability and corrosion resistance.

4. Steel structure (residential): refers to the main load-bearing structure in the building made of steel. Suitable for super high-rise buildings.

The lowest dead weight. From the structure, it can be divided into the above four categories, among which the reinforced concrete structure can also be subdivided:

1. Frame structure.

The load-bearing structure of the building is composed of beams, slabs and columns, and the walls are only used for separation and thermal insulation.

2. The shear wall structure is composed of beams, plates and walls, and part of the wall is stressed in the structure.

Combine the above two sub-categories and derive: frame shear wall structures.

Frame-supported shear wall structure, etc.

The tower looks like a tower from the outside, generally with only one unit door, and the direction of the door after entering is not due east or west, but is symmetrical to the four corners. An apartment is a small unit with an area of no more than 60 square meters, similar to a dormitory, and basically a single apartment, that is, a one-bedroom apartment. A slab building is a unit in a building, and there are N households on a ladder, basically more than 4 households.

I don't know if you understand.

The final title deed shall prevail.

The title deed is a frame cut. That's the frame-cut structure.

Both frame and frame cutter are similar in structure. It's hard to tell at home.

There are 6 types of house structures, which are as follows:

1. Brick and wood structure.

Buildings with brick walls, brick columns, and wooden roof trusses as the main load-bearing structure, like most rural houses, temples, etc. This structure is simple to build, the materials are easy to prepare, and the cost is low.

2. Brick-concrete structure.

Buildings with brick walls or columns, reinforced concrete floor slabs and roof load-bearing components as the main load-bearing structures are currently the most widely used structural types in residential construction.

3. Reinforced concrete structure.

That is, the main load-bearing components including beams, slabs and columns are all made of reinforced concrete structure, and this type of structure is mainly used for large public buildings, industrial buildings and high-rise residential buildings.

In reinforced concrete buildings, there are frame structures, frame-shear wall structures, frame-tube structures, etc. At present, high-rise residential buildings with about 25-30 floors usually adopt a frame-shear wall structure.

4. Steel structure.

Similar to the frame structure, the steel structure relies on the frame composed of steel beams and steel columns to support the upper floor slab, and relies on the "frame" composed of columns and beams to resist the first force. However, due to the fact that the steel columns and steel beams are smaller than the concrete columns and beams, and the frame formed is softer, it is usually necessary to set up oblique supports inside the structure to increase the stiffness of the structure as a whole, and mainly resist the wind load and action in the horizontal direction by the oblique support.

5. Shear wall structure.

It is a structure composed of shear walls that bear vertical and horizontal forces, also known as seismic wall structures.

6. Light steel structure

The beams, columns, and roof trusses of the building are composed of highly simplified steel components, and the construction speed is fast, which is suitable for building low-rise and multi-storey industrial and civil buildings.

The structure of the house can be divided into many kinds, one is the brick and tile structure, the other is the brick and wood structure, the other is the brick and concrete structure, and there are also frame structures and frame shear structures. Brick and wood structures and brick and tile structures are generally common in rural areas, and they are still traditional old houses, which will be built with this structure. The new forms of houses are made of brick and concrete, which is still used in the current rural areas and in some multi-storey buildings.

The house built in the form of concrete is divided into two types, one is a frame structure and the other is a frame and shear structure. In general, most of the commercial buildings are mainly frame-cut structures, while most of the commercial buildings are mainly frame-cut structures.

The structure of a house refers to the classification of building materials according to the beams, columns, walls and other main load-bearing components of the house. The load-bearing main structure is built with steel materials, including suspension structures. The structural form of the house is mainly divided by the materials used in its load-bearing structure, which can generally be divided into brick-concrete structure, brick-wood structure and reinforced concrete structure.

Brick-concrete structure refers to the use of brick or block masonry for the walls and columns of the vertical load-bearing structure in the building, and the reinforced concrete structure for columns, beams, floor slabs, roof panels, trusses, etc. In layman's terms, a brick-concrete structure is a load-bearing structure with a small part of reinforced concrete and a large part of the brick wall. Brick and timber structure house refers to a house in which the walls and columns of the load-bearing structure in the building are made of brick masonry or block masonry, and the floor structure and roof truss are made of wood structure.

Reinforced concrete structure housing refers to the main load-bearing structure of the house, such as columns, beams, slabs, stairs, and roofs, which are made of reinforced concrete, and the walls are filled with bricks or other materials. This structure has good seismic performance, strong integrity, strong corrosion and fire resistance, and is durable.