-
Anonymous users2024-02-07The bottom edge of the door switch box is 70mm from the ground, and the side margin must be 70mm away from the door sleeve line. The same type of switch installed in parallel is 1mm away from the horizontal ground height, and the switch in special position (bedside switch, etc.) is installed according to the owner's requirements, and the switch of the same horizontal line < 5mm.
The socket should be positioned according to its use function, try to avoid too long the wire, and the number of sockets should be more than less. The bottom edge of the anchor socket is 300mm from the ground.
-
Anonymous users2024-02-06Switches and sockets are the main way we provide electricity in our homes, and they are also a kind of infrastructure that allows us to use electricity more safely. This facility needs to have an installation height that must be specified. Failure to develop this code can lead to adverse safety impacts and accidents.
Here we have collected the most complete installation height specifications for switches and sockets, and share them with you.
Switch and socket installation height specification 1.
The installation of switches and sockets at different locations in the home has different strict height and distance control specifications, which also have national standards. For example, the switch socket installed on the bedroom wall needs to be between meters and meters from the ground height, and the distance from the door is about 15 meters to 20 meters, because if the installation is too low, it is a safety hazard for children, and the installation is too high, and it is not convenient for daily use, so the height of the switch and socket installation needs to meet the standard.
Switch and socket installation height specification 2.
The living room is a gathering place for family members on weekdays, so the switch socket in the living room also needs to be combined with high and low. The lowest switch socket is almost above the baseboard, and a protective cover needs to be installed to prevent children from touching the power socket and avoid danger.
Switch socket installation height specification three.
The kitchen is the origin of food, but also a place with the highest water and electricity usage rate, according to the switch and socket installation standards, the kitchen switch and socket should be at least more than one meter from the ground, and the location standard is just right, which is convenient for the usual kitchen electricity, and will not cause safety accidents because of water.
Switch and socket installation height specification four.
The bathroom is a place for daily washing, and there is a lot of water, so in the installation of switches and sockets, it is necessary to ensure the safety of electricity. It is best to install a protective cover on the switch and socket in the bathroom to avoid the water flow from wetting the switch socket, and the distance from the ground is between meters and meters, preferably in meters or meters.
Switch and socket installation height specification five.
The above are all pushbutton switches, in addition to which there is also a pull wire switch socket. The installation height of this kind of cable switch from the ground should be about 2 meters to 3 meters, and the other end of the wire switch should not be too far away from the switch, at least within 100mm, and the wire switch should be vertically downward.
Furniture life is inseparable from power supply, and about the safety of electricity, switch and socket is a key point. Therefore, we must ensure the safe use of electricity, and the installation height of switches and sockets must comply with the standards!
-
Anonymous users2024-02-05The power socket should be installed on no less than two symmetrical walls, and the horizontal distance between the two power sockets on each wall should not be exceeded, and the distance from the end wall should not be exceeded.
The ordinary power socket without special requirements is installed from the ground, and the special socket of the washing machine is installed from the ground, and it has an indicator light and switch.
The balcony should be provided with a single-phase combined power socket from the ground.
When setting up a refrigerator in the kitchen, a special socket should be set up and installed from the ground.
-
Anonymous users2024-02-04When decorating, what to do before the construction of water and electricity is the design of the switch and socket, now there are more household appliances, if the early design is unreasonable, it will lead to inconvenient use after living. So do you know how to design the switch and socket? What are the pertinent suggestions for installation?
Let's take a look at the height specification of switch and socket installation and the installation recommendations of switch and socket.
1. The installation height of the switch.
Regarding the height of the switch, it is necessary to consider not only the ease of use but also the overall aesthetics. The switches in the same room are set on the same level. Considering the convenience of use, the general switch is installed from the ground or position, and the children's room switch can be set on the left and right.
Second, the switch installation suggestions.
The installation of the switch should also consider the composition of the family members, if there are elderly people in the home who are incapacitated, you can consider voice control or remote control switch; If you want to create a sense of fashion and sophistication, it is recommended that you choose a touch sensor switch, and you don't have to worry about the abrupt switch destroying the beauty of the wall; For young people who advocate science, smart switches are the choice, which can be controlled remotely through wifi mobile phones, which is a must-have for smart homes.
3. Socket installation height.
The installation height of the socket needs to take into account the length of the power cord, generally speaking, the length of the power cord of the general Huna is about, in order to ensure that any point in the home can be connected to the power supply, leave an socket every three meters; The socket is generally installed at a height of 30cm from the ground, the socket of the washing machine is 120cm-150cm from the ground, the socket of the refrigerator is 150cm-180cm from the ground, and the socket of the electric water heater is 140cm-150cm from the ground.
Fourth, the socket installation suggestions.
The installation of the socket is similar to that of the switch, and both aesthetics and practicality should be considered. If it is near the table cabinet, the socket can be installed behind the table cabinet without affecting the appearance; The socket of the electric water heater should be on the right side of the water heater, and when multiple electrical appliances are used at the same time, you can consider installing a multi-link bottom box with a socket.
Normally, the situation that is often seen in life is basically the socket on the top or side of the bedside table, because in this way, the charging equipment can be placed on the bedside table when in use. However, it was found that some netizens on the Internet think that the socket should be set on the back of the bedside table, and they think that the socket appears on the top of the bedside table, which not only affects the appearance, but is also particularly easy to be touched when in use, so they think it is best to put it underneath. >>>More
EPL wireless kinetic energy switch, no battery, no wires, no need to chisel the wall buried pipe wiring, installation is not limited by wall materials, easy to achieve dual control and multiple control. You can also use the mobile app or intelligent voice control to achieve dimming and color adjustment, and the smart life scene can be easily enjoyed.
Switch. Receptacle.
It is common in our lives, many homes, offices. >>>More
Switch socket, seemingly small and exquisite, has no effect, in fact, the switch socket has an irreplaceable use for people's electricity safety. When you don't know the brand of switch and socket, and buy fake and shoddy switch and socket products, it will pose a serious threat to the safety of your life and property. Today, let's take a look at which brand of switch and socket is good, and the switch and socket purchase skills. >>>More
The height is higher than the bedside table and lower than the bedside, and the height of the bedside table is generally 55-58cm, so the socket position is set between 70-80cm, which is 10cm higher than the bedside table. >>>More