-
Anonymous users2024-02-07And. LAN port; Just set these two IP addresses and you're good to go.
Suppose the router you connect directly to is a first-level route, and the route connected to this router is a second-level route.
Use a network cable to connect the LAN port of the primary route and the WAN port of the secondary route, and make sure to connect it correctly.
Then connect a computer to the secondary router, and set the IP address of the computer to be in the same network segment as the secondary router, open the Internet Explorer, enter the IP address of the secondary router, and log in to the secondary route;
In "Quick Settings", do not select PPPoE, set the WAN port IP to Ethernet broadband, dynamic IP or static IP.
-
Anonymous users2024-02-06Wireless router can be said to be an important device in the home without network, through it, you can turn the network signal into a wireless signal; Through him, we can save ourselves the hassle of dialing. So can one network cable connect to two wireless routers?
1. One network cable can be connected to two wireless routers.
2. However, you need to connect a shunt, and the wireless router is a router with wireless coverage function that is used for users to surf the Internet.
In general, one network cable can be connected to two wireless routers.
-
Anonymous users2024-02-05A broadband network cable can be connected to two wireless routers, and after reasonable settings, these two wireless routers can access the Internet. When connecting two routers with a broadband network cable, the setup method is as follows:
1. The first router should be connected to a broadband network cable and set up its Internet access by yourself.
2. The second router is used as a switch. The prerequisite for the second router to be able to access the Internet is that the first router can access the Internet normally. So, make sure that your first router is working properly.
1) Connect the computer to the second router, and connect the computer to any of the LAN (1 2 3 4) of the second router with a network cable. Here you can only connect the computer to the second router, and the second router should not be connected to the first router with a network cable for the time being.
2) Modify the IP address of the second router: Generally, in the old version of the router, in the "Network Parameters" - LAN port settings - the right "IP address" is modified to: > click "Save", and then the router will be prompted to restart.
3) Generally, for the new version of the router, in "Advanced Settings" - Network Parameters - Lead Qingyou - > "LAN Port Settings" - modify the "IP address" to: >Click "Save".
4) Connect two routers, prepare a network cable, one end is connected to any interface in the first router LAN (1 2 3 4), and the other end is connected to any interface in the second router LAN (1 2 3 4).
5) Shut down the DHCP server of the second router.
2. Turn off DHCP: For general old versions of routers, click "DHCP Server" - DHCP Service - DHCP Server "Select: Do Not Enable - > click "Save".
Generally, for new versions of routers, Huaihuai clicks on "Advanced Settings.""- Network parameters "-DHCP server" - after the "DHCP server" option below, select Close - > click "Save".
-
Anonymous users2024-02-04Yes, the implementation methods and steps are as follows:
1. Connect two routers.
Prepare two network cables, one end of which is connected to any interface on the LAN (1, 2, 3, 4) of the first router, and the other end of the network cable is connected to the WAN interface of the second router. The other network cable connects one of the LAN (1 2 3 4) of the second router at one end and the computer at the other end.
The LAN port of the first router is connected to the WAN port of the second router.
2. Set up the second router dynamic IP to surf the Internet.
Generally, for older versions of routers, click "Network Parameters" - WAN Port Settings - WAN Port Connection Type" and select: dynamic IP (called "Auto Acquisition" and "DHCP on some routers") - click "Save".
For older versions of routers, set dynamic IP addresses to access the Internet.
One or two wireless routers to achieve bridging.
The two routers are used as a bridge, which is suitable for the two routers without network cable reservation, and the second router must be within the effective coverage range of the first router, otherwise the second router cannot receive the first signal normally, and it will not be possible. >>>More
In fact, even if you get through, you can't dial a number from multiple computers due to telecommunications restrictions, but the problem you said is not very clear, as if you only have one computer! If you just use one, you don't need a switch, just connect the network cable to the computer; If it is on multiple computers (it is better to have a notebook, because the notebook has a built-in wireless network card), connect the network cable to the notebook, and then set the wireless Internet function of the notebook. But the key thing is that you say that the computer does not have a wireless network card, it should refer to the desktop, if this is the case, then you must use a wired router, you just said again, an excuse is four wires and one is eight wires. >>>More
1。The router cable should be correctly arranged2. First, set the host IP to the IP and the default IP address to see how it is on the router 3. >>>More
Two ways: first check the IP assigned to your computer by the fiber router, for example, an integer in 2 254). >>>More
1. Change Workgroup, My Computer, Right-click Properties, 2nd Item Computer Name Change User Workgroup, Make 2 Computer Workgroups Consistent. >>>More