How does one router make two computers play Warcraft?

1. Change Workgroup, My Computer, Right-click Properties, 2nd Item Computer Name Change User Workgroup, Make 2 Computer Workgroups Consistent.

2. IPX protocol, network neighbor-attribute-local connection attribute-installation protocol, find which ipx spx netbios is the longest to install.

3. Control Panel - Management Tools - Local Security Settings - Local Policies - User Rights Assignment - Refuse to access this computer from the network, and Refuse local login - Double-click to open and delete all of them. (pictured).

4. Computer management. Also inside the admin tool, local users and groups - users - enable the guset account.

5. Restart your computer. OK

It's very convenient, as long as the router is connected, it's generally no problem.

Take a four-hole router as an example, it has a total hole, which is the one that you can tell at a glance that is different from other holes, and has a rather standing out from the crowd. This hole is connected to the cat.,And then the remaining four small holes can pick two of your favorite ones and connect them to two computers.,Even if you don't have a network, you can play in the LAN.。

Sometimes one party may build it and the other party can't see or get in, and generally just turn off the firewall of the system.

No matter how you connect, you can even connect the two machines with just one network cable, and then turn off the firewalls of the two machines, and then the Warcraft version of the two computers must be the same, and the Warcraft settings must also be the same, and you can play in the LAN if you change it differently.

Both open the properties of the local connection.

Double-click Internet Protocol.

Subnet Mask: Default Gateway:

The value of the above x is 0 255 digits, and the two computers should be different) Click OK and then click OK, and then turn off the firewall.

That's it.

The first is to modify the IP address.

Then jump right into the game. If you can't get in, it's a firewall problem.

As for the modification of the IP address, please refer to the router manual for details

In short, it is to make two computers in one intranet.

Well, the wire is plugged into the cat - the one on the cat is plugged into the router, and the one on the router is connected to the two computers.

1. Connect Router 1 to the network cable of Router 2 and plug it into the LAN port, not the WAN port.

2. All computers are set with fixed intranet IP addresses, and the gateways of all machines point to the address of Router 1.

3. Let's say the address of Router 1 is.

So how do you set up your computer's IP:

The address range is.

Subnet Mask: Gateway:

You can connect the LAN port with road 1 to one of the LAN ports of Route 2 and disable the WAN port in the settings interface of Route 2.

So the two routes are like hubs, and all the computers are in the same broadcast domain, and you can play games on the Internet.

In addition, if you enable the DHCP function of route 1, you can set the computer to automatically obtain the IP address and you can surf the Internet normally.

Now in fact, it is a b in a local area network, c d e in a local area network, can not be interconnected, it should be ab and cde are not in the same network segment, similar and want to communicate with each other, you need to be in a network segment to do it, wow, the router has dhcp and lan settings.

Or add a small switch, so that you only need one route and 5 machines are all done.

Cascade routers through the NIC interface and connect them to the same local area network.

1. Use a crossover network cable to directly connect two laptops (crossover network cable refers to a network cable with one end being Class A and one end being Class B. Note: The network port of the new notebook now has an adaptive function, and it can also be connected with ordinary network cables, but not all notebooks can, so when using ordinary network cables, please use the fork network cable.

3. Add the IPX SPX protocol, right-click on the network to imitate the neighbor attribute - local connection attribute - install - protocol - nwlink ipx spx netbios compatible transport protocol (you can't see the host built without installing this protocol, StarCraft needs to install this protocol for LAN connection, otherwise you can't see the other party's host).

4. After installing this protocol, the two laptops are rebooted, and then the Warcraft Internet can be connected.