What should I do if there is a scratch on the working surface of the steam iron?

Alum can remove the scorching yellowing of woolen clothing. First, dissolve a small piece of alum in warm boiling water, brush the alum water on the hot part of the clothes, and then put it in the sun to dry, which can reduce the scorch marks; When the woolen material is yellowed, it is also brushed as before, so that the place without fluff due to the yellowing is exposed, and then gently rub the fluff-free part with the tip of a needle until the new fluff is picked up, and then put a damp cloth on the fluff to iron.

Fumigation can remove wool or fabric, and make clothes scorched and yellowed. Scrub with a toothbrush and then steam fumigation with boiling water to reduce scorch marks.

Exposure to the sun can also remove burns from clothing. Cover the unburned part with paper or other things, then spray the scalding part with cool water and expose it to the sun. After the water has dried, spray some water again until the parts are similar in color.

Vinegar can also be used to remove wrinkles and ironing marks on clothes. You can drip the vinegar on the raw edge paper, cover the folds, and iron it with an electric iron, the marks will disappear, and the clothes will be restored to flatness.

If the cotton clothes are burned with scorch marks, you can sprinkle some fine salt on the scorch marks, then gently rub them with your hands, dry them in the sun for a while, and then wash them with water, and the scorch marks can be reduced or even gradually disappear.

If there are scorch marks in silk clothes, you can take an appropriate amount of baking soda, mix it with water and stir it into a paste, apply it to the scorch marks, and then let it dry naturally. This way, the burn marks will disappear as the dry baking soda comes off.

When the chemical fiber fabric is yellowed, it is necessary to immediately put on a wet towel and then iron it, and the lighter yellowing traces can be removed to restore the clothes to their original state.

Winter coats should not be washed and ironed frequently. If the thick coat is accidentally burned, you can use good fine sandpaper to rub the burnt area, and then use a brush to lighten it.

Swipe it lightly. The scorch marks are gone. After the clothes are yellowed, you should immediately put on a wet towel and then iron it, and the light ones can be restored to their original state, and if they are seriously burned, they can only be made up with the same color cloth.

Ironing marks can also be removed with granulated sugar. To eliminate the traces of ironing, you should first soak the clothes with water, dry until semi-dry, electrify the iron and place it upwards, and then put a few grains of sugar at the bottom of the iron, the power will be cut off after the sugar is dissolved, wipe the bottom surface of the electric iron with a dry cloth, and repeat the ironing marks while it is hot.

Wipe the charred area with a ringed onion and rinse with cold water to reduce the scorch marks.

The water used is not good, there is water alkali. Use distilled water, or cool boiled water, not mineral water, tap water. White marks, shake them, or brush them off with a brush.

Now the suit is generally not a chemical fiber fabric, the whole wool material will not be whitish due to high temperature, see if there is a reason for the inverted hair, reverse ironing (Shun Mao) should not be white.

Your electric iron is steam, that is the scale left after the water is boiled, there will be no danger, but this is always sprayed out will leave more or less marks on the clothes is always not good-looking, you pour vinegar water into the hole of water injection and then gently shake, and then pour water vinegar water, you can remove the scale inside, hehe try it, maybe it will be good.

The answer is supplemented. It is best to use boiled cold boiled water, or pure water, which will have less scale. No**, the usual irons will be like this, it's fine.

The reason for the steam, when the ironing is finished, doesn't it still need to be hung, and it will be good when the moisture dissipates.

It's a water quality issue, and it's much better to use pure water.

Prepare materials: patches, irons, rags.

1. First of all, place the patch on the scratch of the down jacket, as shown in the figure below.

2. Then, spread a layer of rag on top of the clothes, as shown in the figure below.

3. Heat the electric iron, iron the rag, and pick it up after more than ten seconds, as shown in the figure below.

4. At this time, the scratches of the down jacket are completely covered by the patches, as shown in the figure below.

It can be covered with patches.

Prepare materials: patches, irons, rags.

1. Buy your favorite patch pattern, the size of the pattern must be able to cover the scratches on the surface of the down jacket. Place the patch on the scratch on the down jacket.

2. Spread a layer of rag on top of the clothes.

3. Heat the electric iron, iron the rag, and pick it up after more than ten seconds.

4. At this time, the scratches of the down jacket are completely covered by patches.

Please use a wet towel wrung out of water to wipe the scratch lightly to keep it from water marks, and then use a towel to light some soda water to apply to the scratches, spray the moisture with a steam iron, and do not use high temperatures. Wait for the scratched fabric to yarn up, and then use a toothbrush to gently brush the back pad cloth and iron it out!

Can you fix the black scratch much smaller than that.

How to fix scratches on a down jacket?

I have a down jacket with a red face. The scratches left by the scratches left by the beating of the clothes are very clear, but they can't be disposed of. Is there a way.

It is estimated that a small amount of detergent was not rinsed when washing clothes last time, and it was evenly distributed in the clothes, and it dissolved in the water as soon as it encountered water vapor, and it appeared again as soon as the water dried, especially the dark clothes were more obvious, and they could be wiped with a wet towel.

Make sure your clothes are clean after washing, if the laundry detergent is not clean, it will leave ......、

There are also funnel containers for water, check the ......

In fact, you don't need to remove it, as long as you touch it with your hands, you can remember it, but you have to touch it for a long time, because I also have clothes like this, I can try it, you can try it!

Rub the top of the scratch with a steam iron, and then immediately use a toothbrush to gently light up the pattern and follow the pattern.

98 or so.

Garment steamer, which can be said to be the "one of the best" in the steam iron family, has become an ideal helper for mid-to-high-end families to take care of their clothes. In addition to cleaning and ironing various fabrics such as silk, wool, woolen sweaters, cashmere sweaters, etc., this kind of product is unique in that it can quickly iron fabrics that are not easy to iron in general, such as curtains, wedding dresses, etc.

This kind of iron not only changes the clumsiness of the traditional horizontal iron, it is smart and easy to use, and the garment steamer is ironing in a natural hanging state, which can easily iron the clothes under the dual action of gravity and high temperature steam (the temperature is about 98), and maintain the best wearing shape. It is understood that the garment steamer has dropped from a few thousand yuan when it was introduced into China overseas in the last century to a few hundred yuan today, that is, a garment steamer is equivalent to a flat iron at that time.

Therefore, the garment steamer has changed from an image tool that only high-end brand fashion stores have the conditions to configure, and then gradually became a luxury item for high-end families to buy, and now it has become a necessary tool for fashion stores, and a household appliance used by high-end families to replace flat irons.

The temperature at which the iron is working properly varies depending on the material of the garment.

The temperature of the iron floor is divided into three grades: low temperature, medium temperature and high temperature, and the temperature of each grade is roughly: low temperature 90 120t, medium temperature 120 160t, high temperature 160t or more.

Answer: It is best to follow the washing mark in the label on each garment, under normal circumstances, there will be an ironing mark, if it must be steam ironed, there will be a steam ironing mark, and there is a low temperature ironing (110 degrees), medium temperature ironing (150 degrees), or high temperature ironing (200 degrees). Unless otherwise specified, it is possible to iron with a steam iron.

For example, some sensitive fabrics, such as silk, it is best not to use a steam iron directly against the clothes, and the iron should be about 1cm away from the clothes when ironing, and ironing at medium temperature.

2.Generally, if you use a steam iron, your clothes don't need to get wet. Unless it is a special fabric, such as a high-end woolen sweater, cashmere sweater, etc.

When the sweater is dry to ninety, you can use a steam iron at a medium temperature of about 140 to iron, the iron should not be pressed directly on it, and the distance from the woolen sweater should be maintained. If you use other irons, you must separate them with towels.

3.An electric iron is a tool for leveling clothes and fabrics, and the power is generally between 300-1000w. Its types can be divided into:

Ordinary type, temperature control type, steam spray type, etc. Ordinary electric irons have a simple structure, are cheap, and are easy to manufacture and maintain. The temperature-regulating electric iron can automatically adjust the temperature in the range of 60-250, and can automatically cut off the power supply.

Note: 100 below medium and low temperature 110 is medium and high temperature, 150 is high temperature, more than 200 is super high temperature, if cotton pants can be ironed above high temperature, to straighten, to avoid untidy, and the higher the temperature, the less likely to fade and wrinkle, and can kill some bacteria.

Extended Information:1Working principle KSD301 series products are a kind of thermostat with bimetal sheet as a temperature sensing element, when the electrical appliance is working normally, the bimetal sheet is in a free state, the contact is in a closed and disconnected state, when the temperature reaches the operating temperature, the bimetal sheet is heated to produce internal stress and act quickly, open the closed contact, cut off the connected circuit, so as to play a role in temperature control. It is widely used in household water dispensers and electric boiling water bottles, disinfection cabinets, microwave ovens, electric coffee pots, electric cookers, air conditioners, glue machines and other electric heating appliances.

2.Electric iron - a cleaning appliance that uses electric heat to iron clothes (flat clothes and fabrics), and the power is generally between 300-1000W. The early irons were made of cast iron, bucket-shaped, and charcoal was burned in the bucket, so they were called "irons".

In 1882, Seeley received the first patent for an electric iron in the United States.

.100 below medium and low temperature 110 is medium and high temperature, 150 is high temperature, more than 200 is super high temperature, if cotton pants can be ironed above high temperature, to straighten, to avoid untidy, and the higher the temperature, the less likely to fade and wrinkle, and can kill part of the bacteria.

100 degrees Celsius or more, is the temperature of steam!

1. The iron temperature is too high.

If the temperature of the iron is too high, it will cause the clothes to deform on the clothes that are not heat-resistant, and the clothes of some materials will be unstable at high temperatures, and the dyeing will begin to decompose, causing the color to fade.

2. There may be scratches on the bottom of the iron.

For white clothes, if there are scratches at the bottom of the iron, it does not affect because it is colorless, but for colored clothes, there are scratches at the bottom of the iron, which will bring up the fibers of the clothes, causing a temperature difference, which is the decomposition of the fibers and the precipitation of the pigment of the clothes, causing the clothes to change color, generally yellowing, or the color to become lighter.

3. The fumarole may be blocked.

The principle of the iron is to use high temperature water vapor to make the clothes more flat, but if the fumarole is blocked, the water vapor will not come out, which will make the clothes unevenly heated, resulting in discoloration, and white clothes are colorless, can not be seen, colored clothes will fade after high temperature.

You can turn down the temperature a little bit, and then add an isolation cover, or find a white cloth pad on it;

The iron is also the culprit of this situation, a better iron will not have any effect on the clothes, or choose the tapimpex pressure steam iron, 5 layers of protection of the clothes.

When ironing clothes, you must first figure out what kind of fabric the clothes are, different fabric fibers can withstand different temperatures, so it will be less damage to the fabric if you figure it out, it is best to use a steam iron, which not only saves the sprinkling but also has less damage to the fabric. However, it should also be noted that the steam iron should be filled with purified water.

Adjust the temperature of the iron, and then put on a cloth, if it really doesn't work, change to a jet iron, it's easier to use.

Because the water has evaporated, I don't know if you pay attention to it, when our clothes are wet, the color is a little darker.

It may be better to put a clean towel on top of your clothes when ironing, and it may be better to iron them on the towel when you are ironing.

Turn the clothes upside down and iron them from the back, the discoloration is because your iron is too hot.

When ironing clothes, iron them through a towel so that the color will not fade.

That's your iron dyed, isn't it? If it's a small iron sold in the market, it would be nice to add an iron plate, and there is one in the mall.

When ironing, spread a clean towel on top of your clothes.

When the cola is boiled and applied to the clothes, it is not visible.

Draw it with a black pen and rub it together with your hands.