What if the accelerator of the car does not return while driving? How to deal with it urgently?

Updated on Car 2024-03-22
7 answers
  1. Anonymous users2024-02-07

    Deal with it calmly, don't panic, grab the low-speed gear, step on the brakes slowly, and pull over with the turn signal.

  2. Anonymous users2024-02-06

    The solution to the throttle line not returning:

    1. If the accelerator pedal is stuck, first see if the foot pad is stuck on the accelerator pedal;

    2. If the throttle is stuck, pull the throttle body mandrel directly to see if it is straight and does not return, if it does not return, it needs to be repaired;

    3. The throttle cable itself is rusty and stuck, remove the throttle cable, check whether it moves smoothly, and replace it if the card is issued.

    It may be that the oil pressure is not enough, or the oil pump is not working well, and the oil filter or grease nozzle is blocked, which will cause the throttle line to not return, and it is recommended to go to the repair shop for inspection.

    If the throttle cable does not return, it may be that there is a problem with the pedal or a problem with the line, and it needs to be replaced to solve the problem.

  3. Anonymous users2024-02-05

    If you encounter the accelerator pedal and cannot return to the position while driving, you can try to press it deeply, in which case it may be that the accelerator cable is faulty. If the return is still not sensitive, the throttle body can be cleaned of the carbon deposits and the accelerator pedal can be lubricated.

  4. Anonymous users2024-02-04

    Summary. Hello, this situation depends on whether the electronic throttle or the pull line throttle is used, the pull line throttle has this problem, clean the throttle, replace the cable after the fuel injector, the electronic throttle has this situation, clean the throttle, rematch the throttle after the fuel injector, or not check the intake system seal, air intake pipe leakage, waste gas valve these places. There is a time limit for the first reply, if you have any questions, you can reply and answer them in detail.

    Hello, this situation depends on the use of electronic throttle or Lu Kuanshen is to pull the line throttle, pull the throttle has this problem, clean the throttle, replace the cable after the fuel injector, the electronic throttle appears in this situation, clean the throttle, rematch the throttle after the fuel injector, or not check the air intake code system seal, air intake pipe leakage, waste gas valve these places. There is a time limit for the first reply, if you have any questions, you can reply and answer them in detail.

    The 560 Denon flagship throttle return is abnormal.

    The throttle sometimes doesn't return.

    Electronic throttle. It is a high defeat and a clear pressure common rail, right, after closing the throttle, how many revolutions can be reached at idling, and the coasting speed with gear is normal at 1200 rpm, and it does not need to be maintained, and the engine computer increases the engine speed according to the speed to avoid accidental stalling and causing the vehicle to lose control.

    It is a high-pressure common rail inspection, right, how many revolutions can the idle speed reach after the throttle, coasting when neutral, the engine speed at 1200 rpm is a normal phenomenon, no need to repair the failure, it is the engine computer to increase the engine speed according to the vehicle speed, to avoid accidental stalling and causing the vehicle to lose control.

    It is a high-pressure common rail.

    The throttle does not return, under what circumstances does Yu Tong appear, how much speed does the engine reach when there is a problem with the rotation of the erection Xun, the neutral gear slide appears, and the engine is normal at 1200 rpm and does not need to be repaired.

    After the accelerator is released, the engine will remain in its original state, and the clutch pedal will be pressed to automatically release the co-oil.

    When coasting in gear, it is still said that coasting in neutral gear requires pressing the clutch pedal before the rev will descend to Kivu. When the problem occurs, how many revolutions does the engine speed maintain, whether the speed is fixed, or whether the speed is different each time.

    This problem occurs with the band gear, but not with the neutral gear.

    It is normal to slide with gear, and after sliding with gear, after the pine oil erection door, the engine is towed by the wide fiber attack vehicle. When the clutch pedal is pressed, the power between the engine and the gearbox is cut off, and the engine returns to idle.

  5. Anonymous users2024-02-03

    While driving, it is inevitable that some accidents will happen. For example, after pressing the accelerator, the accelerator pedal sometimes fails to return in time. Even friends who have never driven a car know that stepping on the accelerator is accelerating.

    If the throttle does not return, it will be difficult to ensure the safety of the driver. So, what should we do to park safely?

    In this case, the first thing to look at is what model your car is. In the case of a manual transmission car, the clutch should be pressed immediately and the gear lever should be placed in an empty position so that no matter how you press the accelerator, the power of the engine will not be transmitted to the wheels. Next, we can do it as usual with this high, brake slowly, and then turn off the engine and check the accelerator pedal.

    If you get stuck with a foreign object, you can't get back to your original position. Remove the foreign object and check it before driving. If it's not a foreign object, but the throttle itself is wrong, don't keep driving.

    Next, let's talk about automatic transmissions. It is believed that owners of automatic transmissions have noticed the phrase "please do not use N gear when driving". If you shift to N gear while driving, it will cause a lot of damage to the engine.

    However, relatively speaking, this seemingly harmful operation is actually the most effective way for an automatic transmission car to encounter a situation where the throttle cannot be returned. After all, the shift time is not long until the vehicle is stopped, so damage to the engine can be minimized.

    Finally, it should be noted that no matter how the wheel is peeled, you must step on the brakes to the end, even if this will cause a lot of damage to the vehicle, but compared with life safety, these are insignificant. In the process of slowing down and parking, you must remember to turn on the right turn signal, put away the warning sign and then turn on the double flash, so as to avoid secondary accidents.

  6. Anonymous users2024-02-02

    Summary. 2.If the throttle is stuck, pull the throttle body spindle directly to see if it will return to its position, and if it will not, it will need to be repaired.

    Hello, I am HR teacher, your question will be handled by me, it will take a while to sort out the answer, please wait patiently for 5 minutes

    Hello, glad to answer for you. The car throttle is raised and the speed does not return.

    1.If the accelerator pedal is stuck, first check whether the foot pad is stuck on the accelerator pedal.

    2.If the throttle is stuck, pull the throttle body spindle directly to see if it will return to its position, and if it will not, it will need to be repaired.

    3.The inside of the throttle cable itself is rusty and stuck, remove the throttle cable, check whether it moves smoothly, and replace it if the card is issued.

    4.If it is not normal after restarting, please send the car for repair, there are many sensors, and it is difficult to find, and if there is a problem, you can only replace it.

  7. Anonymous users2024-02-01

    There are 3 possibilities for the throttle cord not to return: the accelerator pedal is stuck, first see if the foot pad is stuck on the accelerator pedal; If the throttle is stuck, pull the throttle body spindle directly to see if it will return to its position, and if it will not, it will be repaired; The inside of the throttle cable itself is rusty and stuck, remove the throttle cable, check whether it moves smoothly, and replace it if the card is issued.

    Manual transmission model: If the throttle is stuck in the manual transmission model and it is stuck in a position that is not deep, the best way to deal with it is to immediately press the clutch and put the gear lever to the neutral position. Automatic transmission models:

    Try slowing down the car with the brakes and pushing the gear lever into n gear. Most models have the words "Please do not use N gear while driving" on the instruction manual, but who cares if it will cause damage to the machinery in an emergency.

    Photo by Shi Lili) @2019

Related questions
28 answers2024-03-22

I don't know what the arch means, if it is said that it is trembling at high speed, it is generally a problem of dynamic balance, first look at whether the aluminum profile of the tire is stained with a lot of mud, if there is a single place, it will also cause the tire to be unbalanced at high speed. If not, just go to a four-wheel dynamic balance, if not, you can only drive to the repair shop to check.

14 answers2024-03-22

1. Replace the damaged rubber sleeve with a new one.

Once the rubber sleeve is damaged, it will cause the internal oil of the brake cylinder to be consumed quickly, and sometimes after the rain erodes, it will cause some small parts in the brake pump to rust, resulting in the brake cylinder not returning. So at this time, you only need to replace the damaged rubber sleeve with a new one. >>>More

26 answers2024-03-22

If you hear the abnormal sound of "Zizi" in the process of driving, and this is the abnormal sound caused by the problem of the engine belt, because the abnormal sound of "Zizi" is mostly the aging of each belt group of the engine, or the belt is too loose caused by the problem of the tensioner, the friction abnormal sound, belt slippage, etc., if there is a similar "Zizi" abnormal sound, then look for the major belt groups and tensioners inside the engine, such as engine timing belt, generator belt, circulating water pump belt, air conditioning belt, power pump belt, etc. The problem that causes this abnormal noise is the abnormal sound of the engine belt, which is caused by the smooth grinding surface of the joint surface of the belt and the pulley. It usually occurs when the engine speed changes rapidly, and sometimes the belt rings when the load of the attachment driven by the belt increases. >>>More

24 answers2024-03-22

Car air conditioners are different from BAI household air conditioners, which are usually directly driven by the engine, and the power is basically between zhi1kw and a few kw. However, when the air conditioner is turned on, the blower is usually turned on for air circulation, otherwise there is no way to truly achieve refrigeration. >>>More

18 answers2024-03-22

The role of tires in automobiles is to support the body, cushion external impacts, achieve contact with the road surface and ensure the driving performance of the vehicle. >>>More