How to cancel Do Not Disturb on LeTV mobile phones?

Updated on technology 2024-03-28
6 answers
  1. Anonymous users2024-02-07

    Settings "-"Do Not Disturb" -"On Now" -"Off".

    LETV mobile phone flash:

    In the power-off state, press and hold the volume down button + power on button at the same time.

    The boot interface appears, release it, and enter the recovery flash tool for a while.

    Through the volume up and down, select wipe data, OK (the volume button is up and down, the power button is OK), the options appear, and yes.

    After returning to the menu automatically, click Wipe Cache until it automatically returns to the main menu.

    Select reboot and reboot is good to go.

    LeTV phone unlock and root tutorial Le2 phone can't flash solution:

    Since the Le2 mobile phone has a built-in OEM lock, if the OEM lock is not opened, it is impossible to directly flash or root the phone. To do this, we first need to open the OEM lock of Le2 mobile phone: in the "Settings" - "About Phone" interface, connect and click "Version Number" to open "Developer Options".

    After entering the "Developer Options" interface, you can see the "OEM Unlock" function, click the switch on the right to turn this on to complete the OEM unlocking operation.

    If you want to get the root access of the Le2 mobile phone, you only need to connect the Le2 mobile phone to the computer, install and run the relevant root tools, and operate according to the software interface prompts, you can get the root permission of the mobile phone.

  2. Anonymous users2024-02-06

    1.Open the mobile interface 360 Security Guard.

    2.Go to the homepage of the software and click Harassment Block.

    3.Then click on Blocking Settings.

    4.Once entered, there is an option for advanced settings, and then click to enter.

    5.Turn off the quiet hours button.

  3. Anonymous users2024-02-05

    You can go to Settings - (Sound) - Do Not Disturb mode to turn on. You can also set a start time, and the function will automatically take effect within the set time.

    Here's how:

    1. Under the main menu interface, enter Settings;

    2. Choose to turn on Do Not Disturb mode;

    3. Turn on "Manual".

  4. Anonymous users2024-02-04

    1.Turn on 360 Security Guard. 2.Go to the homepage of the software and click Harassment Block. 3.Then click on Blocking Settings. 4.There is an option for advanced settings to click on. 5.Turn off the quiet hours button.

  5. Anonymous users2024-02-03

    Pro Max has a mute button on the left side of the screen to turn it on, and the other two models can directly click the menu button at the bottom left of the screen to turn off the volume.

  6. Anonymous users2024-02-02

    Harassment interception in Phone Manager is fine.

    The steps are as follows: <>

    2. There are three different buttons on the harassment blocking page: SMS** and blacklist, and you can go to the setting button at the top to block the settings.

    3. There are four different options for the blocking mode in the blacklist, and you can choose different settings according to our needs, and generally choose smart settings.

Related questions
11 answers2024-03-28

The steps are as follows: 1. Use a hair dryer to blow around the phone for about 5 minutes, as shown in the figure below. >>>More

12 answers2024-03-28

With more and more apps installed, the iPhone will display notification information from time to time. These notifications are disorganized, annoying, and some of the information is useless. Today I'm going to teach you how to set up these notifications, so check them out! >>>More

5 answers2024-03-28

Tool Material: LETV.

2 Pro phones. >>>More

16 answers2024-03-28

Unless an official version is available, it is not possible. Flashing is risky, and you need to be cautious. The ROM used for flashing is not universal, otherwise Google wouldn't have to have a headache for Android fragmentation. >>>More

9 answers2024-03-28

How to find the lost LETV mobile phone: Coolpad and LETV mobile phones come with a "Find Device" function, which is mainly used to ring, lock, and clear data operations on the mobile phone after the mobile phone is accidentally lost. Here's how to use it: >>>More