What should I do if the computer can t be turned on after partitioning?

Win7 hard disk partition.

After not being able to boot the solution:

Boot into the Win7 system active partition interface, and then use the shift+F10 key to open the cmd command.

OK, enter the diskpart command on the cmd command line.

Then enter the list partition command, then the select partition 1 command, and finally the active command.

If you want to cancel the wrong active partition, you need to enter diskpart in the cmd command line, then enter the lisk disk command, and finally enter the select disk 0 command.

Then enter the list partition command, then the select partition 2 command, and finally the inactive command.

Then use shift+f10 to open the cmd command line, and enter the diskpart command in the cmd command line.

Then enter the list partition command, then the select partition 1 command, and finally the active command.

If you want to cancel the wrong active partition, you need to enter diskpart in the cmd command line, then enter the lisk disk command, and finally enter the select disk 0 command.

Then enter the list partition command, then the select partition 2 command, and finally the inactive command.

Summary. 1. Press the DEL button continuously before powering on to enter the BIOS settings, and then press F7 to enter advanced mode. 2. After entering the page, you can change the font to "Chinese Simplified".

3. Select the mouse arrow to the "Start" option, and slide to the hard drive bbs priorities at the bottom. 4. Among the two startup items, the first is a mechanical hard disk, and the second is a solid-state disk, where the two are out of order, so they can't enter the system. 5. Press enter and change the SSD to the first item.

6. After returning to the previous layer, remember to press F10 to save, press Enter to confirm, and the system will be able to start normally after completion.

What should I do if the partition of my computer fails and I can't turn it on?

1. Press the DEL button continuously before powering on to enter the BIOS settings, and then press F7 to enter advanced mode. 2. After entering the page, you can change the font to "Chinese Simplified". 3. Select the mouse arrow to the "Start" option, and slide to the hard drive bbs priorities at the bottom.

4. Among the two startup items, the first is a mechanical hard disk, and the second is a solid-state disk, where the two are out of order, so they can't enter the system. 5. Press enter and change the SSD to the first item. 6. After returning to the previous layer, remember to press F10 to save, press Enter to confirm, and the system will be able to start normally after completion.

The above is the solution to solve your inability to turn on.

Reason: Repartitioning the entire hard disk during partitioning, resulting in the system files in the C drive being corrupted, so it cannot be turned on.

Solution: 1. Put the disc into the optical drive. Press the power button directly to see if you can boot the disc. If you can, use the disc to install the win7 system and restart the computer.

2. If you can't start the CD, it means that the BIOS settings do not set the CD to the first boot, and you need to make a bad judgment to set it up and change it before starting the computer.

Summary. Try this method first and see if it works. When turning on or restarting the computer, press and hold F8 to enter the system advanced menu. Then you can choose from this screen. With the last correct configuration. So that you can enter the system.

What should I do if I delete a partition on my computer by mistake and can't turn it on?

What should I do if I delete a partition on my computer by mistake and can't turn it on?

Try this method first and see if it works. When turning on or restarting the computer, press and hold F8 to enter the system advanced menu. Then you can choose from this screen. With the last correct configuration. So that you can enter the system.

If you have previously made a backup for the system, you can restore the system backup. When you boot up, select One-Click Restore, and then select the backup file to restore. However, the average computer should not be able to back up the system. If neither of these methods work, you will have to reinstall the system.

I'll wait to try.

What about after entering the system.

Pressing the power button did not respond.

What to do. Pressing the power button doesn't have a little response? Is the screen not lit?

No. That shouldn't be.,The general screen should be bright.,The screen isn't lit.,It's the memory module that has dropped.。 But if you just delete the partition by mistake, the system should be corrupted.

You plug in the power cord, let's rule out whether it is the cause of no electricity.

But don't worry, the last time I ran into a computer, suddenly pressed the power button and didn't respond, in fact, it was either a problem with the computer, or the computer was powered off at that time, and it didn't start. Later, I waited a few minutes and then turned it back on.

As long as the computer presses the button and the screen can light up, it is not a big problem, and the worst result is to reinstall the system. If you have a friend who can reinstall the system, let him help you install it, it's not particularly complicated.

What should I do if the partition of my computer fails and I can't turn it on?

Hello, I am glad to serve you and give you the following answer: There are many ways to solve the problem of computer partition failure and can't turn on, but the most common method is to use a system recovery tool. 1.

First of all, you need to prepare a USB flash drive that can be booted, and then put the system recovery tool into the USB flash drive, and insert the USB flash drive into the computer. 2.Next, you need to restart the computer, when booting up, press the F8 or F12 key to enter the BIOS settings interface, set the USB flash drive as a startup item, and then restart the computer.

3.Then, you can enter the system recovery tool, select Restore System according to the prompts, wait for the recovery to be completed, restart the computer, and you can use it normally. The above is the way to solve the problem of computer partition failure and can't turn on, but you should pay attention to rent, before restoring the system, you must back up your important files to avoid unnecessary losses.