What should I do if my laptop can t turn on after updating?

Method Step 1:

How to deal with the graphics card failure caused by Windows 10 system update, and the computer cannot be turned on.

Step 1: Enter Safe Mode, uninstall the updated graphics driver or roll back the graphics driver.

Windows 10 system into safe mode is different from Windows XP and Windows 7 system, press F8 can not enter safe mode.

The way for the windows10 system to enter the safe mode is: press the power button to turn on, when the machine is ready to enter the operating system after the self-test is completed (in fact, it can't enter the operating system, it has been stuck), press and hold the power button (more than 10 seconds), once it doesn't work, just twice, or even many times, the system will check that the computer is illegally shut down, and then it will automatically enter an [Advanced Options] window, we click: start settings;

Method Step 2:

In the startup settings window that opens, click: Restart;

Method Step 3:

After we click Restart, the computer restarts and then enters the boot settings interface (different from the startup settings in the previous step), press [4) Enable Safe Mode] or [5) Enable Safe Mode with Network Connection] on the keyboard;

Method Step 4:

Now I have entered the safe mode with network connection, right-click [Start] in the lower left corner, and click [System] in the right-click menu;

Method Step 5:

In the system window that opens, we click [Device Manager] on the left side of the window;

Method Step 6:

In the Device Manager window, display adapters, right-click on the graphics card, and in the context menu, click: Properties;

Method Step 7:

In the graphics card properties window, click Drivers, then click Rewind Driver (R), and restart the computer when the operation is finished.

Method Step 8:

Method Step 9:

Step 2: Disable Windows 10 from updating graphics card drivers.

After the computer restarts into the system, right-click [Start] in the lower left corner of the system desktop, click [System] in the start menu, and click "Advanced System Settings" in the open system window;

Method Step 10:

In the System Properties window, click: Advanced, and under Advanced Options, click: Device Installation Settings(s);

Method Step 11:

Method Step 12:

We click: No, and then click: Save Changes;

Method Step 13:

Back to the system properties window, we click: OK, Windows 10 will no longer update the graphics card driver.

Note: At the moment, it has only caused a malfunction for computers with N-card graphics cards, but Mariosoft will definitely take remedial measures.

Method Step 14:

The above is the processing party for the failure of the graphics card caused by the Windows 10 system update, and the computer cannot be turned on.

If your laptop has just been updated and there is no way to turn it on, then you can wait a minute, and if it is not possible to turn it on after a day, you can go for repair.

This should be caused by the incompatibility between the system and the computer, and you can only take it to the after-sales service to restore it to the original system, so that it can be used.

The notebook can't be turned on after the update, in this case, the most likely thing is that the operating system is not updated completely or that it is caused by the driver mismatch after the update, it is recommended to redo the system.

Well, if your laptop can't turn on after the update, then it needs to be charged, maybe you are afraid that there is no power in it, or the system is not updated, you have to wait for a while to see the situation.

It may be that the system has crashed, you can reinstall the system, or go to the store to overhaul it.

It may be that there is no electricity, and the other one is dead, so you can turn it on and on again.

Well,Official,This notebook can't be turned on at all after the update.,It's very likely to be there.,That is, the system isn't ** finished.,You'll see the situation later.,Know.。

The correct steps to deal with the laptop can't turn on Step 1: First of all, we need to analyze it according to the specific situation, if the power supply does not respond, you need to check whether it is the power supply, poor contact, hardware and other problems, if so, then go to the second step, if it is not able to enter the system, it may be an operating system or software problem to go to the third step. Step 2 If you are sure that it is a power supply problem, then check whether the power cord is plugged in properly, and see if the plug is loose, if the laptop you are using is a battery, then plug it in and try again.

You can go to a friend or go to a computer repair shop or sales store to find the same model of power supply to try it. After replugging the power supply, press the power button again, and if it still can't be turned on, press it for a while. If you change someone else's power supply to turn on, it means that there is a problem with the power supply, if it proves that there is no problem with the power supply, it may be the hardware reason, go to the fifth step.

Step 3 The operation process of the third step generally occurs in this situation, and it is no longer possible to enter the system normally, and you need to enter Windows RE for relevant operations. After installing a particular update on your device, a boot black screen may occur. If you get a black screen after updating, you can try to fix the error by uninstalling the most recent update.

How to uninstall the update: 1. Uninstall the update in safe mode (this method is applicable to the version before win10 1809) Before entering the safe mode, you need to enter the Windows RE recovery mode first. If you boot three times abnormally, you can enter Windows RE recovery mode.

Here's how: Press and hold the power button for 10 seconds to turn off the device. Press the power button again to turn on the device.

If the laptop fails to boot after being upgraded and renewed, you can try the following methods:1Check the power and battery:

Make sure your laptop is connected to a power source and plugged in with a charger. If it's a removable battery, make sure it's installed and secure. 2.

Startup Repair: Try using the Windows Startup Repair tool. You can press the F8 or F10 key at startup to enter the boot menu and select the "Repair Your Computer" option.

Then follow the on-screen instructions. 3.Revert to a previous version:

If you have recently updated your Windows operating system, you can try to restore it to a previous version. Press the F8 or F10 key when Windows starts, select "Advanced Options", and then select "Revert to a previous version". 4.

Reset Windows: This is a more extreme solution, but if other methods don't solve the problem, you can try resetting the Windows operating system. This will return the computer to its factory settings and erase all personal data stored in it.

If none of the above solves the problem, you may need to contact the manufacturer or technical support team to investigate the deeper problem.

Hello dear and happy to answer for you. After the laptop update, you need to wait for the system update to be completed before you can enter the system. 1. If the system update causes the machine to freeze, or the waiting time exceeds half an hour, then you can do the following:

3. Restart the computer and keep pressing the F8 key as soon as it starts. 4. Select Enter Safe Mode, and wait for the update in the state of entering Safe Mode without getting stuck. 5. Wait for no more than half an hour, and then it will enter safe mode, as long as you restart the computer again, you can enter the system normally.

6. If it doesn't work, then you can reinstall the system to solve it completely. The above is all my reply, I hope to help you.