When you open the 90 Score Network, you will see The server is not sending any data, so the page ca

Network issues. How to fix it.

Server.

Network issues.

1.Make sure the network connection is working properly.

As shown in the figure, if your network is multi-network, it will cause network disorders. As a result, you will not be able to enter the website. How to solve multiple networks, please pay attention to the experience of "how to solve multiple networks", which will not be discussed here.

2.Control Panel - Network & Internet - Network & Sharing Center.

3.Properties - Internet Protocol - Automatically get the IP address.

As shown in the figure, the local connection - properties - Internet protocol are all automatically obtained, and the effect is as shown in the following figure. Make sure that there is no IP address conflict, and resolve the issue that the server is not sending any data and therefore cannot load the network.

4.Run -cmd

5.Enter ping

6.Enter a command.

Enter arp d, press enter, (there is a space after arp), and clear the cache of the LAN IP to the MAC address. At this time, try to see if you can access the Internet.

end browser issues.

8.Erase traces of surfing the Internet.

end web page fix.

9.Antivirus - Human Service.

10.The input level 2 page cannot be opened.

1. Run regedit hkey local machine software Microsoft Windows CurrentVersion Explorer Shellexecutehooks

This position has a normal key value to remove the rest.

2. Open the cmd window and enter the following command:

for %i in (%windir%\system32\*.dll) do s %i carriage return.

for %i in (%windir%\system32\*.ocx) do s %i carriage return.

After the two separate runs are completed, they are restarted.

The server is not sending any data, so the inability to load the web page is caused by a malfunction, and the workaround is:

1. Open the control panel first, and then select "Internet Options" from the control panel interface, as shown in the figure below.

2. Next, you need to find a "LAN Settings" button and click to enter.

3. Enter the LAN (LAN) setting window, below, there is a "**server" item, if you want to cancel the server**, remove the tick in front of "use **server for LAN", and then press "OK" to cancel the ** setting of IE.

4. Open the "Run" program in the "Start" menu, and then enter the cmd command, OK, and enter the command prompt.

5. The speed of refreshing the DNS domain name cache is very fast, one or two seconds, and after completion, it will prompt "The DNS resolution cache has been successfully refreshed", and you can exit the command prompt, as shown in the figure below.

Has your **domain name passed the whitelist?,If it's placed in a domestic computer room,The domain name must be filed and passed the audit of the protective wall and some security equipment.,You ask the service provider where you buy space or servers.。

regsvr32 i copy and paste the above command into Notepad, and then save the enlarged name 1 set. bat [Beginner's Guide: Right-click on New - Text Document and copy the above command to the text document (Notepad) and save the suffix ".".

bat". Then double-click and wait for him to fulfill it. It should be fine, but if it doesn't, the registry will be fixed.

1. Run regedit hkey local machine software Microsoft Windows CurrentVersion Explorer Shellexecutehooks

This position has a normal key value to remove the rest.

2. Open the cmd window and enter the following command:

for %i in (%windir%\system32\*.dll) do s %i carriage return.

for %i in (%windir%\system32\*.ocx) do s %i carriage return.

After the two separate runs are completed, they are restarted.

Me too!!! Is the server down? Or... The paste bar was harmonized??

It means that a certain ** is only set up to be accessible by mobile phones, and cannot be accessed by ordinary computers.

Hope it helps.

1. Run regedit hkey local machine software Microsoft Rock Infiltration Windows CurrentVersion Explorer ShellexecuteHooks

This position coarse pin spine has a normal key value that removes the rest.

2. Open the cmd window and enter the following command: Douxiao:

for %i in (%windir%\system32\*.dll) do s %i carriage return.

for %i in (%windir%\system32\*.ocx) do s %i carriage return.

After the two separate runs are completed, they are restarted.