Can vegetable leaves be used directly as flower fertilizer? How to make fertilizer for vegetable lea

It is not recommended to make flower fertilizer directly, because these substances are not corrupted, and in the process of their decay and deterioration, a large number of organic acids will be produced to affect the growth of plants, and in serious cases, it will even lead to the death of plants, which is commonly known as "burning seedlings" in agriculture.

Turn leftover roots, leaves, and leftovers from the kitchen into compost.

Method: 1. Cut the remaining fallen leaves and dead branches into small pieces, dry them in the sun, and put them in a plastic poke or plastic bag.

2. Put chicken manure, oil meal, and rice bran.

Wait for a handful of organic fertilizer to be put in, mix evenly, add some water to seal the plastic bucket.

3. Put the plastic bucket in a sunny place, turn the fertilizer up and down every other month, and it will become a good compost after 3-4 months.

4. However, if the compost is finally made, if it is left to the wind and rain, the active ingredients in it are easy to lose, so you should add a cover or spread a plastic sheet on it.

5. In addition to fish bones, many leftovers in the kitchen contain a lot of water and nitrogen, which can be reused as composting materials.

6. Because red granular soil can absorb excess odor and moisture. It can be put into a plastic bucket with dried fallen leaves and dead leaves during production, and then sealed.

7. With the help of microorganisms that multiply inside the compost, it only takes 2-3 months in summer and 4-5 months in winter to become high-quality compost.

I picked up 1 bag of vegetable leaves and made them into "enzymes" to raise flowers, which is 10 times stronger than flower fertilizer, and learned to do it after reading it.

Summary. There are four ways to make organic fertilizer from vegetable leaves. The first is the composting method, which first mixes the rotten vegetable leaves and peels together, and then stacks them layer by layer after drying, and the surface is pasted with yellow mud, which can be rotted for more than half a year.

The second is to use the soil burial method, a layer of rotten leaves, a layer of soil are stacked, and finally the top is sealed with soil. The third is to use the incineration method, first dry the rotten vegetable leaves, and then ignite them, and the grass ash left behind is fertilizer. The fourth is the water soaking method, which is packed into a container and closed with water to rot.

There are four ways to make organic fertilizer from vegetable leaves. The first is the composting method, first mix the rotten vegetable leaves, peels, etc. together, and stack them layer by layer after drying, and paste yellow mud on the surface, which can be rotted for more than half a year. The second is to use the soil burial method to ridge skillfully, a layer of rotten leaves, a layer of soil stacked up, and finally with soil to seal the system.

The third is to use the incineration method, first dry the rotten vegetable leaves, and then ignite them, and the grass ash left behind is fertilizer. The fourth is the big water soaking method of the brothers, put it into a container, add water to close it and rot it.

1. Composting methodIf you want to make organic fertilizer from rotten vegetable leaves, you can use the composting method, which is to mix rotten vegetable leaves with animal manure and fruit peel, and then dry them properly. After drying, it is stacked layer by layer, and the surface is pasted with yellow mud, which generally takes 6 to 12 hours to be ripe. Second, the burial method, the burial method is also one of the commonly used methods for making organic fertilizer.

First, spread the rotten vegetable leaves evenly on the soil, then put a layer of soil on top, then spread the rotten vegetable leaves, repeatedly overlap them, and finally cap them with soil, and wait until the organic matter inside is degraded before use. 3. Incineration methodThe incineration method is not commonly used in life, and the alkaline fertilizer is made, and the plant ash will be burned after incineration. The specific method is to evaporate the water from the rotten vegetable leaves by drying or drying the method, and then ignite them, and finally the plant ash left behind is fertilizer, which can be used as alkaline fertilizer and is rich in trace elements.

Fourth, the water soaking method is to make organic liquid fertilizer, first clean the rotten vegetable leaves, and then put them in a closed-key container, add three-fifths of the water, close the lid of the container, and put it in the sun to expose it. Pay attention to the regular deflation during the waiting, and wait for the fertilizer to have no peculiar smell, which basically means that it is ripe, and the fertilizer can be taken out and used. Note that when using it, dilute it with water before using it.

Ways to turn leftover root leaves into compost:

1. Cut the remaining fallen leaves and dead branches into small pieces, dry them in the sun, and put them in a plastic poke or plastic bag;

2. Put an appropriate amount of organic fertilizers such as chicken manure, oil meal, rice bran, etc., and add water to seal the plastic barrel after mixing the nuclear leakage evenly;

3. Put the plastic bucket in a sunny place, turn the fertilizer up and down every other month, and after 3 to 4 months;

4. If the wind and rain are blown, it is easy to lose the effective ingredients that have been corrected, so you should add a positive eggplant cover or spread a plastic sheet on it.

Flower fertilizer can be used to grow vegetables and feast. Flower fertilizer is used to grow vegetables:1

Nitrogen, phosphorus and potassium are needed during plant growth, and flower fertilizer can promote the growth of eggplant vegetables2Used to grow vegetables, there is nothing *** about vegetables3Flower fertilizer can provide one or several essential nutrients for vegetable growth, and can also improve soil properties and soil fertility.

Overview of cauliflower fertilization.

Cauliflower is an annual plant of the Brassica family of the cruciferous family, which has poor adaptability and strict requirements for external environmental conditions. This is different from breed to variety, and the formation of flower bulbs is influenced by a variety of factors. If the basal fertilizer is insufficient when the cauliflower seedlings are fixed, an appropriate amount of dilute manure can be applied simultaneously when watering the seedlings.

When the cauliflower enters the rosette stage, 15-20 kg of urea should be applied per mu.

What fertilizer is good for cauliflower.

Generally, 5,000 kg of rotted farmhouse fertilizer and 30-50 kg of compound fertilizer are applied per mu of cauliflower. If the soil is deficient in calcium, magnesium and iron, a small amount of medium and trace element fertilizer can be added, mixed evenly with the soil, and finely raked to make furrows. Ternary compound fertilizer is the best foliar fertilizer for cauliflower, and the effect of applying leaf fertilizer is very obvious in the soil with the symptoms of lack of fertilizer and poor fertilizer retention in the middle and late stages of cauliflower growth and development.

How to fertilize cauliflower.

The base fertilizer of cauliflower is very important, and it should be applied before cultivation. At the same time, there is also a certain demand for inorganic fertilizer, which is generally applied when the plant is formed, which can be completed by applying basal fertilizer to the ditching branches. About 10 days after planting in spring, urea is applied according to the growth of cauliflower and watered in time.

When the eggs are large, apply ternary compound fertilizer, and cooperate with boron fertilizer outside the root for 1-2 times, spray vegetable fruit Zhuang Diling, increase yield, and prevent cauliflower from being black and hollow. In addition, cauliflower needs sufficient light during the growing season, and it is a low-temperature and long-day crop like cabbage in terms of development. Therefore, after fertilization, it needs to be given proper light to help the plant absorb nutrients.

If you want to use vegetable leaves as fertilizer, then you need to ferment the vegetable leaves first, and the residue of decaying it can be used as base fertilizer, and its supernatant can be used as top dressing, and it can also be mixed with sand to make humus to use, note that the vegetable leaves that are not rotted can not be used as fertilizer, otherwise it will adversely affect the growth of plants.

1. Fermentation

If you want to use vegetable leaves as fertilizer, then you first need to ferment the vegetable leaves, you can mix the vegetable leaves with a small amount of bone meal and plant ash, and then put them into a bottle, and add an appropriate amount of water to soak, and then seal them and leave them for about a month, so that the vegetable leaves are fermented, and they can be used as fertilizer at this time.

2. How to use

After the leaves are decomposed, its residue can be added to the soil as a base fertilizer, so that the fertility of the soil is more sufficient, and the supernatant produced after its fermentation can be used as top dressing, but it should be diluted with water when using, otherwise direct watering may cause fertilizer damage to plants.

3. Mix sand and soil

If you want to use vegetable leaves as fertilizer, then you can also mix vegetable leaves with sandy soil, and then put them in a sealed container, which generally becomes humus after a month, so that the soil contains sufficient nutrients and can be used to grow plants, which is conducive to the vigorous growth of plants.

4. Precautions

If the leaves are not decomposed, they cannot be used directly as fertilizer, otherwise the leaves will breed a lot of germs after decay, which will have an adverse impact on the health of the plant, and the leaves mainly contain a large amount of nitrogen after rotting, and when the plant flowers and bears fruit, it needs to be applied less.

1. First spread the vegetable leaves that need to be fermented a little thinner, put them in the sun to dry, turn them over for 2 hours, and dry them for two days, which mainly plays a role in sterilization, and can also control the moisture of the vegetable leaves. After it is thoroughly dried, it is slightly rolled to make the leaves slightly finer, and the smaller the volume, the easier it is to ferment. Or you can also add other fermented products to ferment together.

2. Pile up the crushed vegetable leaves, add EM bacterial liquid to the water, spray them evenly on the crushed vegetable leaves, turn them slightly, turn them several times, let the vegetable leaves fully contact the water, and let the water content of the vegetable leaves be between 50%-60%. The moisture content is easy to judge, and if you see the water but the moisture does not drip out of the squeezed part, the water content is just right. Then seal the mixed leaves and seal them with a shading light.

3. The fermentation time of the leaves is generally between 7-14 days, and the leaves should be turned over appropriately on the third day of fermentation, so that the leaves will be more fully fermented. After 14 days, the leaf fertilizer is ready to use.

The fertilizer fermented by this material has poor fertilizer efficiency, and it is okay to plant a general flower and raise an ordinary grass, but to plant other crops, the nutrients are not enough, and the fertility is not enough. At best, it is the effect of humus, and the nutrients of nitrogen, phosphorus and potassium are almost the lowest, so do not use them during the plant growth period. After the leaves are fermented, the biggest use is as an additive when changing soil, or when applying organic fertilizer in autumn.