How to talk about safety and what are the aspects of security

The content about security is:

1. Pedestrians crossing motorways should take pedestrian crossing facilities such as pedestrian crossings, pedestrian overpasses or underpasses. Drive straight through when these facilities are not available, do not cross diagonally or chase and run sharply, and do not suddenly cross when a vehicle is approaching.

2. When you go out to walk, you should pay attention to the surrounding situation, do not look around, chase each other, fight, play, read books or do other things, do not climb over the safety guardrail of the road, and do not skate on the road.

3. Don't ride too fast when riding, be careful to avoid, ride on non-motorized lanes, don't look at your mobile phone, listen to **, so as not to distract yourself, reduce your hearing range, and not easily perceive the dangers and emergencies around you, affecting the judgment of the surrounding situation, resulting in accidents. At the same time, please note that minors under the age of 12 are not allowed to ride bicycles on the road.

Fourth, do not play around the stopped vehicle, because there are many blind spots around the car, squatting or short students are close to the car, when the car is parked or reversing on the side, the rearview mirror and reversing radar will often "turn a blind eye", resulting in tragedy.

5. If the temperature is high in summer, do not leave it alone in the car, and if you are locked in the car alone, you should attract the attention of the people around you by honking your horn and tapping the window.

1. Smoking is not allowed in the laboratory.

2. Students are not allowed to play with fire.

3. It is forbidden to damage or misappropriate all kinds of fire-fighting facilities and fire-extinguishing tools.

Fourth, it is forbidden to burn waste paper and waste on campus with winds above level five, and it is forbidden to make fires and cook indoors with winds above level five.

6. It is forbidden to connect and pull wires and use electrical equipment in violation of regulations without authorization.

"Six prohibitions" for drowning prevention safety

1. Do not swim in the water without permission;

2. Do not swim with others without authorization;

3. Do not swim without the guidance of parents or teachers;

4. Do not swim in waters without safety facilities and rescue personnel;

5. Do not swim in unfamiliar waters;

6. Students who are not familiar with water should not go into the water to rescue without authorization.

Safety production mainly includes the following four aspects:

1. Safety production management.

It mainly includes safety production laws and regulations; safety production management organization and personnel; safety production responsibility system; safety production operation procedures; safety production education and training; safety production supervision and inspection; capital investment in safety production; rewards and penalties, etc.

2. Security technology.

It mainly includes the prevention of mechanical equipment injuries; vehicle injury prevention; electrical injury prevention; fire prevention; prevention of toxic and harmful gases; prevention of injuries caused by natural factors such as geography and climate; protection against chemical burns and scalds; The setting of safety protection devices, safety devices, signal devices, detection devices, etc.

3. Labor hygiene.

The main purpose is to prevent occupational diseases, occupational poisoning and physical injuries, and to ensure the physical and mental health of workers. For example: protection of working health under abnormal conditions such as low temperature and high temperature; Protection against high-frequency, microwave, ultraviolet and other radioactive substances against employees' health hazards; Electrostatic Hazards and Prevention; Prevent and control the hazards of noise to the auditory system of employees; Prevent the visual hazards of bright light and insufficient lighting to employees.

4. Management of working hours, rest and vacation.

It is mainly to implement the national regulations on working hours and rest periods; Implement the relevant national regulations on annual leave and family leave; Strict restrictions on overtime, etc.