What are the dimensions on both sides of the squatting toilet? What is the standard size of a squatt

The size of the squatting toilet used by adults is 610 mm in length and 270 mm in width. The size of the squatting toilet used by the child is 480 mm in length and 220 mm in width. Other common sizes are roughly 250 or 535 and 580 mm in length.

Brick Wars 420 fit 430as well as 450 mm.

There are many sizes of squatting toilets, not only one standard size as everyone thinks, but the main sizes are 520mm*420mm*220mm, 520mm*420mm*280mm, 580mm*450mm*270mm, 520mm*420mm*190mm, 535mm*430mm*240mm, 535mm*430mm*190mm, and the squatting toilet has a water inlet. When we install the squatting toilet, we must ensure that the distance between the water inlet and the wall is better than or equal to 60mm, and the thickness of a good squatting toilet will reach 50mm, and the squatting toilet thinner than 50mm may crack the surface in the process of use, and the squatting toilet also has a water trap, the depth of this place is best not less than 50mm, otherwise in the process of use, the dirty thing is not easy to flush down!

When installing the squatting toilet, we must pay attention to the location of the squatting toilet, the location of the water, and the distance between the pit and the wall, these data must be accurate, otherwise there is likely to be a problem, and in the process of installation, it is not possible to directly use cement to install, because the cement will expand in the process of condensation, and the squatting urine will be crushed, so we can only use mixed mortar to fill the central part!

I can tell you, but if you want the answer, you need to leave at least 30 centimeters to be comfortable. If it is a separate squatting space, the total width should reach more than 1 meter to be comfortable. Remember the answer.

The size of the squatting toilet used by adults is: length 610 mm, width 270 mm; The size of the squatting toilet used by children is 480 mm in length and 220 mm in width.

Other types of more common squatting toilet sizes are: the length is roughly five two zero, five.

Three. Between five and five hundred and eighty millimeters, the width is roughly four hundred and two.

Ten, four hundred. between three and four hundred and five millimeters.

You can choose the right size according to the size of the bathroom space in your home.

Zhongyiju believes that the size of the squatting toilet currently sold on the market is generally *420*190 and other categories, and the size of the pit distance needs to be measured before choosing, so as not to cause unnecessary trouble.

The main squatting toilet sizes in the market are 520 x 420 x 220 mm, 520 x 420 x 280 mm, 580 x 450 x 270 mm, 520 x 420 x 190 mm, 535 x 430 x 240 mm, 535 x 430 x 190 mm.

The distance from the center of the inlet mouth to the finished wall should not be less than 60 mm; The thickness of the green body of any part should not be less than 6 mm, and the depth of the water seal of all sanitary ceramics with the integral water trap shall not be less than 50 mm, and the conventional net wall surface shall be reserved, and the back of the squatting shall be 650 to 700m from the wall, and the side shall not be less than 450 mm, and the net wall shall be reserved for sitting, and the back shall be 300 mm from the wall, and the side shall not be less than 500 mm.

Introduction to squatting toilets

Squatting toilet refers to the toilet characterized by the human body squatting type when used, squatting toilet is divided into uncovered and covered, and the structure of squatting toilet has a backwater bend and no backwater bend. The working principle of the trap is to use a horizontal S-shaped bend to create a water seal to prevent the odor of the sewer from flowing backwards. The height of this drain depends on what type of trap you are using and the height of the sewer horizontal main.

If the horizontal main pipe is not too low than the ground, a P-shaped backwater bend should be used, and a short pipe with a socket can be used to match the installation height, and there is no specified length, so that the horizontal pipe has a slope, and this section of the short pipe is between the squatting toilet and the backwater bend. If the building riser leaves the water connection of the friend limb under the floor slab, or the position of the main pipe is relatively low, the S-shaped water trap should be used, and the height difference should be made up with a short difference mold pipe with socket under the squatting toilet.

1. What is the size of the squatting urinal.

1. The length is roughly between 520 580 mm, and the width is generally between 420 450. There are also some squatting toilets used by children, which are slightly smaller, about 400 mm in length and 220 mm in width.

2. We can also choose the right size according to the size of the bathroom space at home. Therefore, before choosing the size of the squatting urinal, it is also necessary to determine the pit distance, even the length of the center of the water from the wall. Before purchasing, we need to measure it before we can buy a size that meets the standard, and it will be more convenient to install a squatting toilet later.

2. How do consumers choose to squat.

1. There is a split squatting toilet, which does not have a water trap, which is more convenient to install, and the strength of flushing is also relatively large. However, there is a disadvantage, that is, it is difficult to clean in the later stage, once something falls, it is difficult to take it out, and because there is no water trap, there may be a peculiar smell in the later stage.

2. Choose a conjoined squatting toilet, which has a water storage inlet, and has a bend inside, which can effectively prevent the odor from flowing backwards. However, there is a disadvantage, it is easy to clog and it is difficult to dredge in the later stage.

3. There is also a front water-blocking squatting toilet, which can be used to block water, and it is not easy for water to leak out when flushing, which is suitable for installation in a larger space in the bathroom.

4. There is also a rear drainage squatting toilet or a front drainage squatting toilet, to choose these two styles, we need to measure the distance from the center of the sewer pipe to the wall, and there is no advantage or disadvantage between the two.

Summary: Now more families are willing to choose squatting toilets, if you choose the early stage, you must first determine the size of the squatting toilet, and at the same time, you also need to choose the type of squatting toilet. On the one hand, it can be selected according to the size of the indoor area, and on the other hand, the appropriate form of squatting toilet can be selected according to the installation of the drainage pipe.

There are two kinds of squatting toilets: one is bent and not bent, the height of the bend is generally 32 to 40 cm, the height of the bend is generally 16 to 20 cm, see whether it is bent or not bent and then measure the installation height of the actual size, and then look at the reserved height of the sewer pipe to see the height of the actual squatting toilet installation, if you really want to deviate, it can not be less than 3 cm of the height of the squatting toilet, that is, the cement table can not be lower than 3 cm of the height of the squatting toilet, The wall of the squatting toilet is generally 3 to 5 cm thick, if it is this installation method, the overall light sensitivity of the squatting toilet is slightly worse, and the simple point is to put the squatting toilet on the cement table, generally the surface of the squatting toilet and the cement platform are flat.

It's okay. are generally jealous, you can check the food on the Internet to find it.

The squatting toilet is one of the most common sanitary ware in our daily life, which makes it more convenient and hygienic for us to go to the toilet, but many people don't know much about the squatting toilet, such as what is the size of the squatting toilet? Let me lead you through this problem.

1. What is the size of the squatting toilet?

Generally, the specifications of squatting toilets for adults are: length 610 mm, width 270 mm; The size of the squatting toilet for children is 480 mm long and 220 mm wide.

Other common squatting toilets on the market are mm long and about mm wide. How to choose the right squatting toilet depends on the area and space of our own bathroom.

Second, how to choose the right squatting toilet.

1. From the overall consideration, under normal circumstances, brand stores will find a model space for customers to choose. They will also put the certificate that can prove their own quality in the store, and when purchasing, the first thing to see is whether its appearance is beautiful and neat, which can let us see at a glance the manufacturer's dedication to the product.

2. Touch the surface, generally good quality squatting toilets, the surface is relatively smooth, we touch with our hands without uneven feeling, the color of inferior squatting toilets is usually darker, and you can see a lot of small pores in the sun.

3. Take a look at the quantity, high-quality squatting toilets are usually produced with high-end ceramics, because this kind of ceramics generally need to be made at a high temperature of 1200 degrees, and then crystallized into a fine glass phase, so the squatting toilets of this material will be very heavy, and the weight of the squatting toilets can be judged by whether they are of high quality.

I concluded: The above is some information about the squatting toilet, from the above article we can see that the specific size of the electrical appliance depends on the person who uses it, the space of the bathroom, and the area. There are many types of squatting toilets on the market, we must be cautious and choose carefully to prevent being deceived, I hope it can help everyone.