-
When the temperature is relatively low, it is indeed a little difficult to start the car; The more trouble-free and effective way is to park the car in a relatively high temperature environment; But there are very few garages in general; However, it is relatively easy to keep the battery warm, and it is easier to start when the voltage is high; In addition, when starting, do not get on the car once, do not rush to light the car twice, and the interval should be at least 30 seconds; It is conducive to the maintenance of batteries and engines; If it is an EFI truck, it can be ignited and not moved; Stepping on the gas pedal has little effect. The maintenance of the car is generally based on the km (km) traveled; Time is only the basis for auxiliary reference (for example, some private cars cannot reach 10,000 km a year, so time must be limited); General vehicle maintenance is mainly divided into two aspects: one body cleaning:
Interior cleaning for 3-6 months; Especially at the turn of the season, in addition to the center console, the interior of the car should be taken into account; Including air-conditioning ducts, under seats, etc.; Outside the vehicle, the car should be washed after the rain, and the bird feces and insect corpses that fall on the car body should be cleaned up in time; Waxing once a month or so; 2. Vehicle maintenance; Don't say it's a vehicle, any mechanical equipment should be carefully maintained; Insiders know a truth: that is, "cultivation" is more important than "cultivation"; When maintenance is in place, not only safety is guaranteed; At the same time, it can also greatly extend the service life and service life of the vehicle; reduce costs; It plays a role in doing more with less. The following points should be paid attention to when it comes to vehicle maintenance:
1. Replace the three filters and oil; 2. Check whether the brake fluid, transmission oil, and power steering oil should be replaced; 3. Detect brake pads, tires, shock-absorbing suspension, etc.; 4. Check the spark plug, throttle and oil supply system; 5. Front and rear rotation positions, routine (lights, batteries, etc.) inspection. Only by hard work can there be harvest; If you start the car right, the car will naturally be worthy of you; Usually spend a small amount of money, but then you can save a lot of money. If the vehicle is driving to save fuel, one is to reduce the weight of the body; Anything that is useless is not put in the car; Including when adding gasoline, if you don't run long distances and it's convenient to refuel, you can use it every time; the second is to press the throttle lightly and lift it slowly; At the same time, pay attention to driving at a constant speed.
-
Replace all kinds of oil products in time according to the mileage, keep the economic speed at 90 kilometers per hour, and try to drive in high-speed gear.
-
Engine: strictly in accordance with the oil change standard to implement, so that it can effectively extend the life of the machine External aspects: avoid contact with acidic substances, wax frequently, wash the car in time and other interior aspects:
-
Engine: change the oil every 5000 kilometers, such as 1500 2500 is recommended in the first insurance, 2500 5000 once, and every 5000 after that, preferably around 5w-40. The steam filter air filter is replaced every 10,000, and the throttle valve is cleaned every 10,000
Unplug the battery before disassembling the throttle to avoid computer failure. Spark plugs are replaced every 20,000.
Brakes: Brake discs, replaced every 80,000, including rear drum. Brake fluid, steering fluid, antifreeze, and battery should be replaced every 2 years.
Tires: Replace every 4 years or 80,000, according to the degree of tire wear, can be replaced in advance. Do balancing and wheel alignment regularly. Pay attention to replacing the steering ball joint.
That's basically it, I'll tell you if you don't understand.
8035 Wood Network recommends you:
First of all, it is necessary to maintain indoor dry humidity. >>>More
Talk a little more about the daily minutiae.
We don't have to show each other's conversations in depth, we don't have to talk about hopes, dreams, etc. >>>More
Routine maintenance knowledge of cutting fluid:
1. Regularly test the concentration and pH value of cutting fluid, and in the process of preparing cutting fluid, it is generally required to use tap water with better water quality to dilute the cutting fluid to reach the specified concentration, and stir it well. >>>More
Hello, there are three daily maintenance problems in the use of the sand washing machine: >>>More
Just a few days ago, I sorted out the preventive maintenance card of the lower pump, and the content is probably for you, but this is the situation that the first-stage pump we use is a water ring pump, and other first-stage pump types are similar. >>>More