What are the requirements for Grade A qualification for survey and design?

The Class A qualification requirements for survey and design must meet the national standards for Class A qualification for survey and design, and the quality management is fully implemented.

Of course, there are very strict requirements for the handling of survey and design Class A qualifications. He had to meet their rules. There must be a strict approval process.

First of all, a qualification to be reviewed must be reviewed, and you can only conduct an audit after passing it, otherwise it is not possible.

What are the requirements for the Grade A qualification for survey and design, the requirements for the Grade A qualification are still relatively high, and the procedures need to be perfected, and I need to use my rich experience and professional knowledge, which are all procedures that need to be handled.

Let's design a grade A qualification, that must require you to reach this level of knowledge, you yourself must be able to see the design of the tea party.

Of course, there must be certain requirements for the qualification of survey and design, and only specific factories and industrial exploration equipment can be used.

I think I think one of the corresponding requirements for him must be strictly said to be recognized, and he must deal with it well.

CAN be handled during the holiday period. What are the requirements in general, uh, this handle should. It's very early and there's no creature disclosure, so uh I'm going to uh use the best of this stuff uh for this.

My request, of course, was to handle some of their related documents and stuff.

What are the requirements? If there are any requirements, just follow his routine, so complicated this.

The requirements for the Grade A qualification for survey and design are the certificates that need to be examined.

What are the important requirements for the Grade A qualification for survey and design? There are important requirements that must be realistic.

2-1 Qualifications and credibility.

1) Meet the conditions of enterprise legal person.

2) Good social reputation, paid-in registered capital of not less than 1.5 million yuan.

2-2 Technical conditions.

1) Professional equipment is complete and reasonable. The number of main professional and technical personnel shall not be less than the number specified in the "Main Professional and Technical Personnel Allocation Table of the Engineering Survey Industry".

2) The main technical person in charge or chief engineer of the enterprise shall have a bachelor's degree or above, more than 10 years of engineering survey experience, as the project leader, has presided over no less than 2 professional engineering survey projects or no less than 1 class A project, and has the qualification of registered civil engineer (geotechnical) or the senior professional and technical title of the specialty.

3) Among the personnel specified in the "Main Professional and Technical Personnel Allocation Table of the Engineering Survey Industry", the registered personnel shall preside over no less than 2 projects of the applied engineering survey type B or above as the professional and technical person in charge; The leading professional non-registered person has presided over no less than 2 Grade B projects or no less than 1 Grade A project of the applied engineering survey type as the professional and technical person in charge.

2-3 Technical equipment and management level.

1) There are technical equipment corresponding to the engineering survey project that can meet the requirements, and meet the requirements specified in the "Engineering Survey Main Technical Equipment Allocation Table".

2) Have a fixed workplace that meets the needs of the job.

3) There is a relatively complete quality, safety management system and technology, management, equipment and materials, personnel, finance, archives and other management systems.

1. Engineering survey qualifications.

The real estate lawyer will tell you that the engineering survey qualification is divided into comprehensive engineering survey qualification, engineering survey professional qualification, and engineering survey labor qualification. The comprehensive qualification of engineering survey is only set up as Grade A; The professional qualification of engineering survey is based on the nature and technical characteristics of the project, and the categories and levels are established; There is no level of engineering survey labor qualifications.

Enterprises that have obtained comprehensive qualifications for engineering survey are not restricted in the scope of engineering survey business; Enterprises that have obtained professional qualifications for engineering survey can undertake engineering survey business of the corresponding profession at the same level; Enterprises that have obtained engineering survey labor qualifications can undertake geotechnical engineering treatment, engineering drilling, and well sinking engineering survey labor services.

2. Engineering design qualifications.

Engineering design qualifications are divided into comprehensive engineering design qualifications, engineering design industry qualifications, and engineering design special qualifications. The comprehensive qualification of engineering design is only set up as Grade A; Engineering design industry qualifications and engineering design special qualifications are set up according to the nature and technical characteristics of the project.

Enterprises that have obtained comprehensive qualifications for engineering design are not restricted in the scope of their engineering design business; Enterprises that have obtained the qualification of the engineering design industry can undertake the engineering design business of the corresponding industry at the same level; Enterprises that have obtained special qualifications for engineering design can undertake the corresponding special engineering design business at the same level. Enterprises that have obtained the qualification of the engineering design industry can undertake the corresponding special engineering design business at the same level within the scope of the industry, and do not need to separately obtain the special qualification of engineering design.

Newly established construction engineering survey and design enterprises can only apply for qualification to the construction administrative department after registering with the administrative department for industry and commerce. Newly established construction engineering survey and design enterprises to apply for qualifications, shall provide the following information to the construction administrative department:

1. Application form for construction engineering survey and design qualification;

2. Business license of enterprise legal person;

3. Articles of Association;

4. Resumes and copies of appointment (appointment) documents of the legal representative and main technical person in charge of the enterprise;

5. Copies of professional title certificates, graduation certificates and ID cards of technical personnel listed in the qualification declaration form of construction engineering survey and design enterprises;

6. Proof of registration change of registered practitioners listed in the qualification declaration form of construction engineering survey and design enterprises;

7. Other relevant supporting materials that need to be issued.

The qualification level of the newly established construction engineering survey and design enterprises shall not exceed Grade B, and a temporary period of two years shall be established. Within two months before the expiration of the provisional validity period of the qualification, the enterprise can apply for the conversion to the formal qualification level, and the application shall provide the certification materials of the enterprise's qualification annual inspection in the past two years.

1. Survey Class B qualifications and reputation.

1) It has the qualification of an independent corporate legal person.

2) Have a good social reputation, with a registered capital of not less than 1.5 million yuan.

Technical conditions. 1) Professional equipment is complete and reasonable. The number of main professional and technical personnel shall not be less than the number specified in the "Main Professional and Technical Personnel Allocation Table of the Engineering Survey Industry".

2) The main technical person in charge or chief engineer of the enterprise shall have a bachelor's degree or above, more than 10 years of engineering survey experience, as the project leader, has presided over no less than 2 professional engineering survey projects or no less than 1 class A project, and has the qualification of registered civil engineer (geotechnical) or the senior professional and technical title of the specialty.

3) Among the personnel specified in the "Allocation Table of Major Professional and Technical Personnel in the Engineering Survey Industry", the leading professional non-registered personnel as the professional and technical person in charge have presided over no less than 2 projects of the applied engineering survey type B or above, or no less than 1 Grade A project. Technical equipment and management level.

1) There are technical equipment corresponding to the engineering survey project that can meet the requirements, and meet the requirements specified in the "Engineering Survey Main Technical Equipment Allocation Table".

2) Have a fixed workplace that meets the needs of the job.

3) The company's quality, safety management system and technology, management, equipment and materials, personnel, finance, archives and other management systems are sound.

Grade B in Engineering Design.

Qualifications and credibility.

1) It has the qualification of an independent corporate legal person.

2) Good social reputation, registered capital of not less than 3 million yuan.

Technical conditions. 1) The professional equipment is complete and reasonable, and the number of main professional and technical personnel shall not be less than the number specified in the main professional and technical personnel in the application industry qualification standard.

2) The main technical person in charge or chief engineer of the enterprise shall have a bachelor's degree or above, more than 10 years of design experience, have presided over no less than 1 engineering design of large-scale projects in the applied industry, or no less than 3 engineering designs of medium-sized projects, and have registered practice qualifications or senior professional and technical titles.

3) Among the personnel specified in the main professional and technical personnel allocation table, the non-registered personnel of the leading specialty shall be the professional and technical person in charge of not less than 2 medium-sized projects or above in the applied industry, or no less than 1 large-scale project.

Technical equipment and management level.

1) Have the necessary technical equipment and a fixed workplace.

2) There is a sound quality system and technology, operation, personnel, finance, file management system.

If there are laws and regulations, you will know if you look them up.