What is the qualification process for the architectural design industry?

Seven-step qualification process!

The first step is to obtain a business license: before applying for qualifications, the construction company must obtain a business license.

The second step is to obtain the required documents: prepare the technical personnel information corresponding to the qualification level of the first-level constructor, second-level constructor, senior engineer, engineer, nine members, skilled workers, etc. (detailed configuration will be discussed in this lecture).

The third step, the application: the qualification of the enterprise to the name of the legal person to the district and county construction administrative departments to submit a written application, the district and county construction administrative departments agreed, reported to the Municipal Housing and Urban-Rural Development Bureau.

The fourth step, review and approval: the Municipal Bureau of Housing and Urban-Rural Development will review the enterprises applying for decoration qualifications, mainly to review whether the personnel, assets and project performance of the enterprises meet the qualification standards. The approval document will be issued after meeting the qualification conditions for professional contracting of building decoration and decoration projects.

The fifth step, reporting: the enterprise applying for decoration qualification shall submit the original and copy of the qualification application materials to the construction industry management department of the district in accordance with the principle of territorial management, and the district construction industry management department shall report to the municipal construction management office after passing the preliminary examination.

The sixth step, publicity: the construction management office will review the qualification application materials, publicize the qualifications that belong to the scope of municipal approval, and after the publicity is completed, it will be approved without objection and reported to the provincial construction management bureau for the record.

The seventh step, get the certificate: after the qualification is approved, the enterprise will go through the registration procedures for the construction engineer at the Engineering Department of the Municipal Housing and Urban-Rural Development Bureau, and then receive the qualification certificate after receiving the registered construction engineer certificate.

Design qualifications are mainly divided into comprehensive design qualifications, industry design qualifications, professional design qualifications, and special design qualifications.

The levels of various qualifications are divided into Class A, Class B, Class C, and Class D, and some of them do not have Class D and Class C.

Applying for design qualifications is not the same as construction qualifications, and the application for design qualifications can be applied directly from Grade B, while construction qualifications can only be applied for from the lowest level.

The specific process of architectural engineering design qualification:

Learn more about the conditions for this qualification;

Purchase of a registered person to declare the lock;

Introduce personnel and declare personnel;

Fill in the relevant details in the qualification declaration system, submit the declaration and print the application materials;

Submit qualification materials to the local construction department and verify the originals;

Waiting for the online announcement of the hall;

After passing the review, the qualification will be obtained.

In the first two years, I found an agency to do a good job, what is Fujian Far EasTone telecommunications enterprise management, which is very professional.

When construction enterprises handle qualifications, in order to improve efficiency and reduce detours, they often seek more experienced qualifications to handle the company, at this time the cost has become a problem that enterprises are more concerned about, and it is an important part of the qualification. So how much is the cost of this process, and what are the included? The necessary explanations are made below:

First, the enterprise personnel are attached.

In the process of applying for qualifications, the cost of personnel affiliation accounts for a large proportion, and a certain number of professionals and qualifications are required for qualification, and the affiliation fee of each type of professional is different.

2. Handle social security for personnel.

When construction enterprises apply for qualifications, they must pay social security for each person, which is an indispensable item. The agency company must meet the period of 1 month or 3 months to purchase social security for the affiliated personnel, and the cost needs to be paid by the enterprise.

3. The service fee of the qualification handling company.

When an enterprise handles a construction qualification through a qualification agency, it should provide a certain service fee, which is roughly included.

1.Consultation fees.

2.Material preparation costs.

3: Personnel management costs.

Specific construction companies can make judgments based on the details. Users' views are available (available online).

Architectural design qualifications are divided into construction engineering industry design qualifications, and architectural engineering professional design qualifications, and the qualifications are divided into grade A, grade B, grade C, first of all, there must be a company business license, and then the purchase of the declaration system referred to as "survey and design, has been upgraded to fill in the declaration system in accordance with the steps.

Inquiry Registered Electrical Engineer Power Generation, Transmission and Transformation 29-380,000 3 years Still Lacking, Registered Electrical Engineer Power Supply and Distribution 18-280,000 3 Years Slow**7, Registered Utility Engineer Water Supply and Drainage 27-330,000 3 Years 0, Registered Utility Engineer Power 18-280,000 3 Years 5, Registered Utility Engineer HVAC 18-260,000 3 Years, First-Class Registered Architect 14-240,000 2 Years.

Class 2 Registered Architect 3-50,000 for 2 years.

0. First-class registered structural engineer 18-250,000 3 years.

i. Second-level registered structural engineer 8-120,000 3 years Relatively stable 0, Registered urban planner 9-130,000 3 years.

Wu, registered supervision engineer construction ministry 3-50,000 1 year 8, registered supervision engineer ministry of transportation 1 year transaction normal.

Grade B in the engineering design and construction industry.

2 registered first-class buildings.

2 registered first-level structures.

1 registered water supply and drainage.

1 registered HVAC.

1 registered power supply and distribution.

4 Intermediate in Construction.

4 intermediate level in the structure.

There are 2 water supply and drainage workers.

2 HVAC workers.

2 electrical engineers.

2 protection senior engineers.

There are 1 and 24 communication senior engineers.

What registration personnel are required for Class B qualification in the construction industry, and what is the registration process?

The personnel requirements and equipment for the Class B qualification in the construction industry are as follows:

2 first-class architects 240,000 2 years 1.

2 first-class structural engineers, 320,000, 3 years, 1.

1 Registered Utility Engineer (HVAC) 280,000 3 years 1 Registered Utility Engineer (Water Supply and Drainage) 1 350,000 3 years 1 Registered Electrical Engineer (Power Supply and Distribution) 1 320,000 3 years 1 Construction Intermediate or above 4 1 1 year.

Structure: 4 intermediate titles or above, 1 million 1 year.

2 or more intermediate titles in water supply and drainage, 1 million 1 year, 2 or more intermediate titles in HVAC 1 year, 1 in 1 year.

2 or more with intermediate titles in electrical 1 million 1 year.

2 protection senior engineers, 20,000 1 year, 1.

1 senior in communications, 20,000 1 year, 1

A total of 24 people are needed.

Procedure: The first step is industrial and commercial registration.

The second step is to purchase software (Beijing Construction Information Source) and the third step is to allocate personnel and register personnel.

Step 4: Prepare the reporting materials (apply online and print out the reporting materials), and Step 5: Submit the materials.

Step 6 Approval (Approval Process) Municipal Construction Committee - Provincial Construction.

Architectural design qualification process:

1. Industrial and commercial registration (get a business license);

2. Purchase the system;

3. Staffing and registering personnel;

4. Prepare reporting materials (first apply online and then print out paper reporting materials);

5. Submit materials; Approval (approval process) Municipal Construction Committee - Provincial Construction Department.

If an engineering design enterprise wants to contract a project, it must apply for design qualifications.

Whatever you need, just one condition, very rich.

Design qualification process:

1. Company registration: meet the minimum registered capital, and the paid-in capital is in place, issue a capital verification report, and the business scope needs to cover your qualifications;

2. Allocate personnel;

3. Make application materials, complete staffing, make application materials, and fill in electronic declarations;

4. Qualification declaration.

Scope of Architectural Professional Engineering Design Qualification:

1. Grade A. Undertake the design business of the main project and its supporting projects of the professional construction project, and its scale is not limited;

2. Class B. Undertake the design business of the main project and its supporting projects of small and medium-sized construction projects in this specialty;

3. Grade C. Undertake the design business of small construction projects of this specialty;

4. Grade D (limited to architectural engineering design):

1) General public construction projects: single construction area of 2,000 square meters and below; Building height of 12 meters and below;

2) General residential projects: single construction area of 2,000 square meters and below; Brick-concrete structures with 4 floors or less;

3) Workshops and warehouses: single-storey workshops and warehouses with a span of no more than 12 meters and a tonnage of no more than 5 tons of single-beam cranes; Two-storey factories and warehouses with spans not exceeding meters and no dynamic load on the floor;

4) Structures: chimneys with a height of no more than 20 meters according to the standard general drawing; water towers with a capacity of less than 50 cubic meters; pools with a capacity of less than 300 cubic meters; Silos with a diameter of less than 6 meters.

Legal basis

Regulations on the Management of Construction Engineering Survey and Design Qualifications

Article 5 Engineering survey qualifications are divided into comprehensive engineering survey qualifications, engineering survey professional qualifications, and engineering survey labor qualifications.

The comprehensive qualification of engineering survey is only set up as Grade A; The professional qualifications of engineering survey are set up in grade A and grade B, and according to the nature and technical characteristics of the project, some majors can be set up in grade C; There is no classification of engineering survey labor qualifications.

Enterprises that have obtained comprehensive qualifications for engineering survey can undertake engineering survey business of various specialties (except marine engineering survey) and various levels; Enterprises that have obtained professional qualifications for engineering survey can undertake engineering survey business of corresponding levels and corresponding specialties; Enterprises that have obtained engineering survey labor qualifications can undertake engineering survey labor services such as geotechnical engineering treatment, engineering drilling, and well sinking.

Asking questions is not the question.

Answer the handling process: 1. Before preparing the business license application qualification, the construction enterprise needs to register the company, receive the business license, log in to the construction committee**, and register the enterprise user. 2. Fill in the information, collect materials, sort out the dossier in accordance with the qualification level standards, and prepare the corresponding technical personnel information, such as first-class constructors, second-level constructors, senior engineers, engineers, nine members, skilled workers, etc.

Third, the submission of qualification application online materials are complete, printed out, the enterprise in the name of the legal person to the district and county construction administrative departments to submit a written application, the district and county construction administrative departments agreed, reported to the Municipal Housing and Urban-Rural Development Bureau. Fourth, accept the on-site verification of the Municipal Bureau of Housing and Urban-Rural Development to apply for the qualification of the enterprise audit, mainly to review whether the enterprise personnel, enterprise assets, project performance meet the qualification standards, meet the qualification conditions after the issuance of approval documents.

Fifth, report to the municipal construction management office of the enterprise in accordance with the principle of territorial management to the district construction management department to submit the original and copy of the qualification application materials, the district construction management department after the preliminary examination of the municipal construction management office. Sixth, the publicity of the municipal construction management office to review the qualification application materials, the qualification that belongs to the scope of municipal approval to publicize, after the publicity of no objection to be approved and reported to the provincial construction management bureau for the record and waiting to receive the certificate; For the qualifications that fall within the scope of provincial approval, the qualification application materials will be reported to the Provincial Construction Management Bureau, and the certificate will be collected after the qualification is approved.

7. After the qualification approval of the certificate, the enterprise shall go through the registration procedures for the construction engineer in the Engineering Department of the Municipal Bureau of Housing and Urban-Rural Development, and then receive the qualification certificate after receiving the certificate of registered builder.

So what is your question, can you say it so that we can answer it

Ask the question of how long is the period for replacing another registration certificate given by the online qualification review after the first-class registered architect required for the qualification of the design institute leaves the company.

That is to say, three were enough, but now if there is one less, how long will it take to make up for it?

Okay, I didn't find this question on the Internet, so I came to pay for consultation. I need to know how long the online qualification system gives to the company.

Question: The online qualification review only gives the enterprise a month, to find a new certificate to make up the three requirements, is it?

I'll find you the process of applying for architectural design qualifications:1Understand regulations and requirements:

Learn more about the rules and requirements for obtaining architectural design qualifications in your country or region, including qualifications, qualification levels, application materials, etc. 2.Training and Educational Background:

Obtaining an architectural design qualification usually requires some work experience. According to the requirements of the adjudication case, it may be necessary to provide proof of relevant work experience, such as proof of engaging in architectural design-related work, project experience, and materials for construction projects in which he participated. 4.

Preparation of application materials: Prepare all required application materials according to requirements, including personal identification, academic and training certificates, work experience certificates, resumes, project experience and cases, etc. 5.

Review and Evaluation: Submitted applications will be reviewed and evaluated, including an assessment of the authenticity, compliance, and professional competence of the application materials. 7.

Grade A qualification for architectural engineering design industry.

1. Qualifications and reputation have the qualification of an independent corporate legal person. It has a good social reputation and a registered capital of not less than 6 million yuan. The engineering design projects completed by the enterprise shall meet the requirements of the performance assessment of the engineering design type in the main professional and technical personnel of the applied industry, and the engineering design of each design type of each design type shall not be less than 1 or 2 engineering designs of medium-sized projects, and shall be completed and put into production.

Second, the technical conditions are complete and reasonable, and the number of main professional and technical personnel shall not be less than the number specified in the main professional and technical personnel in the applied industry qualification standards. The main technical person in charge or chief engineer of the enterprise shall have a bachelor's degree or above, more than 10 years of design experience, have presided over no less than 2 engineering designs of large-scale projects in the applied industry, and have registered practice qualifications or senior professional and technical titles. Among the personnel specified in the main professional and technical personnel allocation table, the non-registered personnel of the leading specialty shall preside over no less than 3 medium-sized or above projects in the applied industry as the professional and technical person in charge, including no less than 1 large-scale project.

Third, the technical equipment and management level has the necessary technical equipment and fixed workplace. The enterprise management organizational structure, standard system, quality system, and file management system are sound. Enterprises with special qualification for construction general contracting can obtain the design qualification of the corresponding industry.