-
Start the vehicle.
2. Tap the date and time option on the display.
3. Click Set Time.
4. Set a new time.
5. Then click on the display screen of the Dongfeng Citroen Sega sedan to set the date.
6. Next, you can set a new date on the display screen of the Dongfeng Citroen Sega sedan.
7. Finally, the date and time of the Dongfeng Citroen Sega sedan will be adjusted, and you can press the return button.
-
Can you find the time It's the time You can adjust it if you find it, if you can't do it, call ** to the service station and ask.
-
There is a menu button on the steering wheel, press and select the personality setting, select the time setting, [If you have a problem with the car, ask the car master. 4S shop professional technician, 10 minutes to solve. 】
-
Hello landlord, the problem of your display flashing may be like this, this situation should be caused by the oxidation of the micro switch on the button board. It can be normal after replacement. This phenomenon can also be caused by abnormal power supply of the display, and the common reasons are deterioration and damage of the filter capacitor.
In short, this problem is not a big problem, it is easier to find and eliminate the problem by checking it, and the maintenance of ** in both cases should not be expensive.
The general navigator needs to set its own time, and the GPS itself is time-based (receiving the time signal of the satellite), which is very accurate.
Personally, I suggest that you should solve the flickering problem of the monitor first, and you can go to some 4S shops or car repair shops to ask.
-
There are two black buttons next to the place where the time is displayed, and the menu button in the center console goes to the settings.
1. Enter Laidan, press and hold the button for more than 1 second, when the time starts to flash, release the button, and then start to adjust the hour, after adjusting, press the knob inside, and then start to adjust the minute, and exit after adjusting.
2. It is best to refer to the instruction manual, which has detailed instructions.
-
In the place where the time is displayed, you will see two black buttons next to it, just press it with a toothpick or something.
-
It's easy, it's easy, it's easy, it's easy, because I don't have one.
-
Clocks of watch shops.
It actually points to 10:10:35.
When you buy a watch in a watch shop, or look at a sample of a watch in the window, you will find that all the clocks stopped at 10:10:35, do you know why?
Originally, at this time, the position of the hour, minute, and second hands gave a sense of harmony, and the surface was basically divided into thirds, so that customers could clearly see the structure of the watch. In addition, the hour, minute, and second hands of this time are jumping towards you like a person cheering triumphantly. The first letter of the word "victory" in English is "v", and these three needles are placed in a "v" shape.
Since clocks were produced in Europe, designers and manufacturers used 10:10:35 as the best time to display the time.
-
According to foreign legends, 10:10 p.m. is a very special time for "ghost spots". I don't know if it has something to do with this.
-
The corners of his mouth, eyebrows, and eyes that look like a smile are very happy. Also, like the English v, is a sign of victory.
-
This is a mandatory protective measure, and it can be lifted only by ignition, but it takes more than 5 minutes, and the release time can be extended a little by using a generator to help charge the battery.
-
Adjust it to sport mode and you can cancel it.
How to adjust the filling of fish-stuffed dumplings.
Fish stuffed with dumplings is commonly used. >>>More
Paver Start Adjustment Procedure:
At the beginning, it is necessary to determine the machine, that is, to correct the parameters. To know the unit data, that is, how many numbers or how many turns to go on the 1cm meter. The water stability is still the oil layer, if the water is stable, adjust it by 4-5cm, walk on 2-3m and then adjust it under observation. >>>More
1. First press the "Clock" button, and press the corresponding key to adjust the clock to the current time. >>>More
The batter for frying things is adjusted as follows: >>>More
Press and hold the [Cancel Resume] button for about 3 seconds to turn on or remove the keypad lock. Adjust the clock: Press and hold the [Clock] button, and press the [Hour], [Minute], and [Day] keys at the same time to adjust the clock and day. >>>More