How to adjust the chnt time control switch, how to adjust the time of the CHNT time control switch

1. First press the "Clock" button, and press the corresponding key to adjust the clock to the current time.

2. Then press the "Timing" button and the LCD screen.

The word "1 on" appears in the bottom left, and then press the corresponding key to enter the desired start time.

3. Press the "Timing" button again, the word "1 off" will appear at the bottom left of the LCD screen, and then press the corresponding key to enter the desired closing time.

4. Finally, continue to press the "Timing" button, the page displays information, press the "Auto Manual" button, and after the setting is completed, press the "Cancel Recovery" button.

The setting of the time control switch is relatively simple, such as setting the opening time at 18:00 and the closing time at 05:00

The setting method is as follows, the first opening time is 18:00, the first level is set to 05:00, the second opening and two closing and the third opening and three closing all the way to ten opening and ten closing must clear the time to zero (because it is not used). Then set the day of the week, set the current time of the time switch, and turn the time switch to automatic.

You can refer to the manual to set it up, it's very simple. Just try a few more times.

1. First press the "Clock" button, and press the corresponding key to adjust the clock to the current time.

2. Then press the "Timing" button, the word "1 on" will appear at the bottom left of the LCD screen, and then press the corresponding key to enter the desired start time.

3. Press the "Timing" button again, the word "1 off" will appear at the bottom left of the LCD screen, and then press the corresponding key to enter the desired closing time.

4. Finally, continue to press the "Timing" button, the page displays information, press the "Auto Manual" button, and after the setting is completed, press the "Cancel Recovery" button.

Hello dear! I'm glad to answer for you: 1. First of all, check whether the time of the switch is the same as now, if you need to readjust, you can press and hold the "clock" button, and then look at the displayed time and whether it is the same as the current time.

Press and hold the "School Star with Wang Period", "Calibration Time", and "Calibration" keys respectively to adjust the clock to the current time. 2. Press the timing button to display the word 1 open, and then select the same or different working modes according to the school week, and then enter the time required to open according to the school time and calibration. 3. Press the timer button again, the screen will display 1 off, and then enter the closing time according to the school week when the school is handed over.

4. Continue to press the timer to display 2 on, and you can set the time of multiple timing switches by analogy; The steps can be referred to. 5. If you don't need multiple sets of switches, press Cancel to restore to eliminate the extra time. 6. After the timing is set, the current time will be displayed on the clock button screen.

7. Finally, pressing the "automatic manual key" symbol will jump to the automatic position, and then the time control switch can automatically switch on and off according to the set time.

Instructions for use of the time-controlled switch:

1.Adjust the clock (the clock is already set at the factory). To update the adjustment again, press and hold the "Clock" key, and press the "Beginning of School" key, the "School Start Time" button, and the "School Grade" key.

4.Continue Anton's timer button, and "2 on, 2 off, 10 on, 10 off" will appear on the LCD screen. Refer to steps 2 and 3 to set future opening and closing times.

If it is only turned on and off once a day, you must press the "Cancel Recovery" button to eliminate the storage time of "2 on, 2 off, 10 on, 10 off", so that the LCD screen displays"——

5.After the timing setting is completed, press the "Clock" button, and the LCD screen will display the current Beijing time.

6.When the power is turned on, a green light on the panel indicates that the circuit is energized, and a red light indicates that the switch is on.

7.Press the "Auto Manual" key to turn the circuit on or off directly. To make the switch automatic, first press the "Auto Manual" key, turn the symbol at the bottom of the display to the "Off" position, and then press this key to turn it to the "Auto" position.

8.Press the "Time" key, then press the "Day" key to set the same day, different days from Monday to Friday, and the same setting from Saturday to Sunday.

Hello! The following situations will occur in multiple groups of CHNT timing switches:1

Time synchronization: Multiple sets of time control switches set the same time, that is, on or off at the same time, which can be used in occasions where multiple devices need to be controlled at the same time, such as lights, sound, etc. 2.

Time staggering: The time set by multiple groups of time control switches is staggered, that is, they are turned on or off at different times, which can be used for occasions that need to control multiple devices in different periods, such as air conditioners, TVs, etc. 3.

Time conflict: The time set by multiple sets of time switches is conflicting, that is, the same time or off time is set at the same time, which may cause the device to be turned on or off at the same time, or the device may not be turned on or off normally. 4.

Fault: If the time set by multiple groups of time control switches in the stove is wrong or malfunctioning, it may cause the equipment to fail to open or close normally, and it needs to be repaired or replaced in time. In short, when multiple sets of time-controlled switches are the same, they need to be set according to specific usage scenarios and equipment requirements to avoid problems such as time conflicts and failures.

Summary. 1.The time settings are the same:

If the time setting of multiple sets of time switches is the same, they will be turned on or off at the same time, and the function of time-sharing control cannot be realized. 2.The time setting is different:

If multiple sets of timing switches have different time settings, but they control the same device, then the device will be turned on or off repeatedly in different time periods, which will waste energy and affect the life of the device. 3.The control equipment is different:

If there are different devices controlled by multiple sets of time switches, then there will be no impact between them, but it should be noted that if there is an interdependency between the devices, then it needs to be set according to the actual situation to avoid problems.

Multiple groups of CHNT timing switches will lead to the following situations.

1.Same time setting: If multiple sets of timing switches have the same time setting, they will be turned on or off at the same time, and the function of time-sharing control cannot be realized.

2.Different time settings: If the time settings of the time control switches are different, but the equipment they control is the same, then the equipment will be repeatedly turned on or off in different time periods, which will waste energy and affect the life of the equipment.

3.Different control equipment: If the equipment controlled by multiple groups of time-controlled switches is different, then there will be no impact between them, but it should be noted that if the devices are interdependent, then they need to be set according to the actual situation to avoid problems.

Therefore, in order to avoid the above situation when the gear beam is used, it is recommended to set it according to the actual needs when using the CHNT time control switch to ensure that the time and control equipment of each group of switches are different, so as to achieve more refined time-sharing control and improve the efficiency of energy and use.