What is the reason why the car has an abnormal noise when my Wuling light clutch is halfway down

The clutch plate and the sub-cylinder have a disengaging bearing sound.

The clutch engagement is incomplete.

If this is the case for you, it is important to check whether the clutch plates are smoothly combined and whether the shock spring is broken.

Wuling Hongguang S car starts after the abnormal sound of stepping on the clutch sound disappears, this is the abnormal sound of the gearbox, after stepping on the clutch, the engine and the gearbox power is cut off, the gearbox does not turn, naturally there is no abnormal sound, check the gearbox gear oil, missing or gear oil deterioration will lead to abnormal sound of the gearbox, the specific operation steps are as follows:

1. Remove the gearbox oil drain screw.

2. Release the transmission oil.

Summary. Wuling Rongguang stepped on the clutch and creaked, and when he released it, it didn't ring, what happened? There are three main types of internal noise in the transmission:

First, the bearing is damaged, and after stepping on the clutch, it will also exist, but after cutting off the power, there is no load, and the sound will become smaller; The second is tooth surface pitting, which is the same way, because there is no load, after cutting off the power, the speed of one shaft will be reduced, and the sound will gradually decrease; The third is the scratching of the gear sleeve and the joint tooth, due to the wear and tear of the shift fork in the process of use, after a certain amount, the position of the gear sleeve will not be in the center, there is a possibility of scratching, and the sound will gradually decrease after the clutch is stepped on. If you can be sure that it is the sound of the engine, and not the other parts are loose, you can look at this, it is very helpful, if it is the engine, it should be very regular, such as a certain speed, then every time it reaches this speed, it will appear, otherwise it is definitely not the sound of the engine, if it comes and goes, it is best to find other reasons.

Wuling Rongguang has an abnormal sound when driving, and it doesn't sound when you step on the clutch.

Wuling Rongguang stepped on the clutch and creaked, and when he released it, it didn't ring, what happened? There are three main kinds of sound inside the transmission: first, the bearing is damaged, and after stepping on the clutch, it will also exist, but after cutting off the power, there is no load, and the sound will become smaller; The second is tooth surface pitting, which is the same way, because there is no load, after cutting off the power, the speed of one shaft will be reduced, and the sound will gradually decrease; The third is the scratching of the gear sleeve and the joint tooth, due to the wear and tear of the shift fork in the process of use, after a certain amount, the position of the gear sleeve will not be in the center, there is a possibility of scratching, and the sound will gradually decrease after the clutch is stepped on.

If you can be sure that it is the sound of the engine, and not the other parts are loose, you can look at this, it is very helpful, if it is the engine, it should be very regular, such as a certain speed, then every time it reaches this speed, it will appear, otherwise it is definitely not the sound of the engine, if it comes and goes, it is best to find other reasons.

Hello, because seeing that you did not rate me last time, I am very concerned about your experience. If you are satisfied with my service, I hope you can give a thumbs up! If there is a problem, I am always waiting for you. I wish you a happy life and a happy life!

Summary. Dear, hello, Wuling Rongguang clutch is stepping on the sizzling, the reasons are as follows. First, this phenomenon is caused by the aging of the clutch cable of the vehicle, and it is recommended to replace the clutch cable first.

Second, if the sound emitted by the gearbox position is a problem with the separation bearing inside the gearbox, the gearbox needs to be disassembled and replaced with the separation bearing. Third, there is a lack of oil in the position of the clutch pedal shaft, which is to re-disassemble the pedal shaft for lubrication. Hello, I wish you a happy life, if you have any questions, you can consult at any time, I will reply to you as soon as possible.

Dear, hello, Wuling Rongguang clutch stepped on the sizzling, the reasons are as follows. First, this phenomenon is caused by the aging of the clutch cable of the vehicle, and it is recommended to replace the clutch cable first. Second, if the sound emitted by the gearbox position is a problem with the separation bearing inside the gearbox, the gearbox needs to be disassembled and replaced with the separation bearing.

The third auspicious mu, the clutch pedal shaft position is short of oil, this is the need to re-disassemble the pedal shaft to do a lubrication treatment. Hello, I wish you a happy life, if you have any questions, you can consult at any time, I will reply to you as soon as possible.

The clutch line of the Wuling Rongguang pickup truck squeaked, and it has been replaced with a new line.

It has been replaced with a new one, and if you still want to do this, you need to check the separation shaft layer or the clutch pedal shaft.

When I first started driving, there was a sound, and after a while, there was a sound, and the pedal had been drained.

First of all, let's make sure, is it the gearbox position or the pedal position? If it is the pedal position, then this is the wear of the pedal shaft, and the need to replace the pedal with vertical fingers is completely solved.

I think it's the sound of a thread.

If it is a sound from the wire, then it is recommended to replace the original parts.

It is a problem to replace the new one with the old one now.

In this case, the possibility of pulling the wire is not a big judgment, consider the sound from the gearbox position, and check whether it is the gearbox fork or the release bearing.

How to check. When the sound is made, lift the car up and determine the position.

Generally, it doesn't sound when it's cold, but there is a sound after driving for a while.

Friends, this cave can be further repaired by determining the specific location, first determine whether it is the pedal position or the gearbox position? , and when the car is warmed up, go to the repair shop to lift the car up and do a relative investigation of He Yuying.

On the whole, this is not a big problem, so you can rest assured.

Hello dear! Thank you for your wait, if this kind of sound appears, there are two main reasons to consider, and it needs to be determined according to the location of the sound. The first reason is because of the lack of oil in your clutch pedal part, the sound caused by this is mainly in the clutch pedal position, that is, under your feet, if it is in this place, then it is recommended that you lubricate the axle pin of the clutch pedal, mainly because of the lack of oil in the axle pin.

The second reason is that there is a problem with the clutch's disengagement bearing or pressure plate, and the sound is mainly concentrated in the combination of the engine and the gearbox, and if there is a sound here, then the main reason is that the clutch release lever or the disengagement bearing or pressure plate has a problem, in this case, you can consider removing the clutch to check it, if there is a lack of oil and need lubrication, if the wear is serious, it needs to be replaced. Kiss! I hope mine can help you, in addition, you can also click on my avatar to follow me, so that if you have any questions in the future, you can click on my avatar to consult me!

If you feel that you have the help of your brother, please give a 5-star like, and look forward to meeting you again! Have a great day!

Summary. Hello, this Wuling Hongguang gearbox abnormal sound, and then press the clutch pedal will not sound, this situation is generally the separation bearing inside the gearbox is damaged.

Wuling Hongguang gearbox abnormal noise, step on the clutch and it won't sound, what's going on?

Hello, happy to answer your questions.

Hello, this Wuling Hongguang gearbox abnormal sound, and then press the clutch pedal will not sound, this situation is generally the separation bearing inside the gearbox is damaged.

Please speak Mandarin.

Hello, this Wuling Hongguang gearbox abnormal sound, and then press the clutch pedal will not sound, this situation is generally the separation bearing inside the gearbox is damaged.

Wuling Hongguang S car started with an abnormal sound and stepped on it.

The sound of the closure disappears, this is the abnormal sound of the gearbox, after stepping on the clutch, the engine and the gearbox power are cut off, the gearbox does not rotate, there is naturally no abnormal sound, check the gearbox gear oil, the lack or gear oil deterioration will cause the gearbox abnormal noise, the specific operation steps are as follows:

1. Remove the gearbox oil drain screw.

2. Release the transmission oil.

This may be a sound caused by the idling of the gears in the transmission, so ask the technician to determine whether it is abnormal according to the sound volume.

Generally, the manual transmission will have some small sounds when the engine is running, because the internal gears of the transmission are idling, so there will be a sound when the gears rotate, and the sound will disappear when the clutch is pressed, because the engine power is cut off, the transmission gears will stop rotating, so there will be no sound.

Therefore, the sound should be confirmed whether it is too loud before deciding whether to repair the transmission.

1. The engine has abnormal noise.

Symptom description: There is a lot of abnormal noise in the engine compartment, and most people also judge it to be the abnormal noise of the engine compartment by the sound**, which is usually a metal screeching sound or a howling sound.

Solution: The abnormal engine noise indicates that the technical status of a certain mechanism of the engine has changed. It is mainly caused by excessive wear and tear of some parts or improper assembly and adjustment.

Some abnormal noises can still predict that the engine will be damaged accidentally, so when the engine has abnormal noise, it should be repaired in time to prevent the fault from expanding.

It should be reminded that if it is an abnormal noise in the engine, most of the owners will not be able to solve it by themselves, and it is best to send it to the factory for maintenance.

2. There is abnormal noise in the gearbox.

Symptom description: If there is a "rustle" sound inside the gearbox while the car is driving, and there is no more after pressing the clutch or accelerator, there will be a whistle-like sound when changing gears.

Solution: There are many transmission parts, and the reasons for the sound are more complex, so we should pay attention to whether it is related to a specific speed, such as some planetary teeth that sound at about 50km h.

Whether it is related to certain gears, which is very important for judging the failure of the transmission, if a certain gear sounds, it must be related to the components that affect the transmission of the gear; If all gears sound, it is often a common meshing shaft failure or a lack of oil in the transmission. Whether it is related to specific actions, such as increasing and decreasing gears, starting, rapid acceleration, sharp deceleration, turning, etc., are effective means to judge abnormal noise, among them, changing speed and direction are particularly important for judging the rear axle fault.

If the abnormal noise of the transmission is obvious, it is recommended to send it to a professional repair shop to check the faulty parts, and then replace them.

3. There is abnormal sound of wear.

Symptom description: When driving on the accelerator or brake, there is always some abnormal noise in a certain part of the body, the sound is not loud, and it does not affect normal driving, but it always makes people worry a little about the failure of the body.

Solution: The abnormal noise of the door is mainly caused by the lack of lubrication, but it is necessary to judge whether it is the position of the door hinge or the glass regulator, door lock mechanism, handle mechanism, etc. inside the door. In the case of door hinges or limiters, special door hinges and slide grease can be used, while special door attachment grease is used for lubrication of glass regulators, door locking mechanisms, handle mechanisms, etc. inside the door. In terms of brand selection, try to choose the commonly used brands in 4S stores, such as German Marty, Kluber, Tiger Head Hotolube, Fox, etc.

It is not advisable to use engine oil or ordinary butter, it will freeze in winter, and the harmful smell will affect your health.

Check the clutch plates and clutch assembly.