The Apple phone can t be turned on and keeps displaying the Apple logo

1. Press the Power + Volume Down buttons at the same time to force a restart.

2. When you see the white Apple logo screen on the screen, please release the button, which means that the current iPhone has been forced to restart.

3. If the above method doesn't work, plug the iPhone into the power supply, as shown in the figure below.

4. When the iPhone is connected to the power supply, please pay attention to observe whether the battery low battery icon will appear on the screen, if so, it means that the current automatic shutdown is caused by the battery is dead. In this case, please wait for the charge to reach 5 and it will automatically turn on.

The Apple phone can't turn on, and the Apple logo keeps showing that there is a problem with the phone's system, and you need to use "iTunes" to update the phone's system.

Take the iphone7 phone as an example, the operation method is as follows:

1. Open the iTunes software on your computer.

2. Then turn off the phone, press and hold the volume down, and connect the phone with the computer at the same time.

3. The phone will automatically enter recovery mode.

4. Click "Update" on iTunes.

5. Wait for the automatic update.

6. Wait patiently for the update to complete and then the phone will turn on.

This can be done by force restarting by following the steps below:Mobile: Apple 7

System: 1. Directly after the Apple phone crashes, short press the volume + button.

2. If there is no problem at this time, continue to short press the volume- button.

3. To complete the above operations, you need to press and hold the power button.

4. As a result, white apples will appear on the screen.

logo, you can return to normal boot.

This can be done by force restarting by following the steps below:

1. Directly after the Apple phone crashes, short press the volume + button.

2. If there is no problem at this time, continue to short press the volume- button.

3. To complete the above operations, you need to press and hold the power button.

4. In this way, the white apple logo will appear on the screen, and it can be restored to normal boot.

The Apple phone can't turn on to show the white apple, it is recommended to use the Niu Xuechang Apple mobile phone repair tool.

1. Launch Tenorshare iPhone Repair Tool (REIBOOT - iOS) on PC or Mac. If you have any other questions, you can contact customer service directly. <>

2. Select "Standard Repair" or "Deep Repair" according to the specific situation.

Note: Standard repair will not cause data loss, but deep repair will cause data loss, so you need to back up data in advance. <>

5. The repair process will take about 10 minutes, please do not disconnect the connection between the computer and the mobile phone during this process, after the repair is completed, the repair success interface will pop up according to the prompts.

If the standard repair doesn't fix your iPhone system issues successfully, you can also choose to use the Deep Repair feature. However, as mentioned earlier, deep repair will cause data loss, so make a backup in advance. <>

If you want to know more about iOS system repair for iPhone, we recommend choosing Tenorshare Repair Tool for iPhone. Tenorshare iPhone Repair Tool can easily bypass iTunes restore or backup errors with a high success rate; At the same time, it can fix up to 150 other iOS system glitch issues, such as iPhone update error, iPhone app stuck, etc.; It can also fix the system failure problem on Apple TV, and the data will not be lost.

Turn off your iPhone and press and hold the power on button and the home button at the same time. When you see the white Apple logo, release the power off button, continue to press and hold the home button, open iTunes, wait for it to prompt you for recovery mode, then press and hold the shift key on the keyboard, click "Recover", and you're done.

Restart the processing by excitation silver resistance and follow the steps below

Mobile: Apple 7

System: 1. Directly after the Apple phone crashes, short press the volume + button.

2. If there is no problem at this time, continue to short press the volume- button.

3. To complete the above operations, you need to press and hold the power button.

4. As a result, white apples will appear on the screen.

logo, you can resume the normal boot next spring.

Hello, I'm glad to reply to you, the reasons and solutions for the Apple logo to be displayed all the time when the Apple mobile phone can't be turned on: 1. The mobile phone battery is out of power and causes it to shut down, and it can't be turned on, so you need to charge the mobile phone to make sure that the power is sufficient. 2. The mobile phone system runs wrong and causes a crash, and the machine can't be turned on, at this time, you can press and hold the power button and the home button at the same time and don't put the first sail, and force restart the mobile phone The system crashes and causes the shutdown and can't turn on, at this time, you should connect the mobile phone to the computer's iTunes software to restore the system, and you can start normally after completing the system recovery.

4. The hardware failure of the mobile phone causes it to automatically shut down and cannot be turned on, such as battery failure, motherboard chip failure, internal circuit failure or other parts of the mobile phone, etc., which need to contact Apple's official after-sales service for maintenance to solve. If the mobile phone is repaired with the warranty card during the warranty period. I hope it will be helpful to you, and you can always find the teacher if you have any other questions in the future.

I wish you all the best in your life.

Summary. Hello, the Apple mobile phone boots up and shows the Apple logo, and the phone can't be turned on, which is generally the system crash. You can force restart your phone to see if it turns on.

Hello, the Apple mobile phone boots up and shows the Apple logo, and the phone can't be turned on, which is generally the system crash. You can force restart your phone to see if it turns on. Be. Good.

1. After the phone is turned off, press the volume plus key first, and then press the volume down button; 2. Then press and hold the power button and release it when the Apple logo appears; 3. Press and hold the power button again until you enter recovery mode. 4. Open iTunes on the computer, connect the phone to the computer, wait for the computer to check the spine to the phone, and select Recover; 5. Click to restore and update again, the next step, agree, change the tung and wait for the recovery to be completed.

Hello, your situation is Apple's common cavity bridge white apple failure, the simple explanation of white apple is that the cracked Wu Qianmeng software is installed into the system of Apple Regret Collapsed Fruit, resulting in the system software and the installed application software game conflict.

1. Please press the "Power and Home Screen" button at the same time, keep it for more than 10 seconds, and force restart the phone.

2. If the white apple is still displayed on the screen.

If you need to press the "Home + Power" button at the same time until the screen goes black.

Loosen. 3. Please connect your iPhone to your computer and flash your iTunes device, if your computer does not have iTunes software installed, please go to Apple's official website**.

The reasons why the Apple mobile phone can't turn on: 1. There is no power. If you use up all the battery power, the charge needs to be charged to 5% before it can be turned on normally.

So in this case, please let the phone charge for a while before trying to turn it on. 2. Software malfunction. If you are sure that the current battery of your phone is sufficient, but it cannot be turned on normally, there may be a problem with the software system of your phone.

At this time, we can try to press the home button + power button on the home screen of the mobile phone at the same time until the screen is lit up and there is a display. 3. System crash. If none of the above solutions work, and you see an iTunes connection screen on your iPhone's screen, it means that your phone has entered recovery mode at this time.

When this happens, the only way to do this is to restore the system for your phone. Connect your phone with the computer with a data cable, press and hold the home button and the power button at the same time for 10 seconds, then release the power button and continue to press and hold the home button for 5 seconds, if you see the connection to iTunes, it is a failure, and you have to start again. If the screen doesn't light up after these 2 steps, you will enter DFU recovery mode, and then you can use iTunes to restore your iPhone, or use a third-party flashing software to reflash your iPhone.

Hello, dear, very happy to answer for you! Here's the answer, check it out! The Apple phone keeps showing the Apple logo and can't turn on the reason:

1.The iPhone may be in recovery mode: If the iPhone keeps displaying the Apple logo, it may be because the phone is in recovery mode, try to enter recovery mode and try to boot it again.

2.Low battery: If the battery of your iPhone is low, it may cause you to be unable to open the mold.

Try charging your iPhone and see if it turns on properly. 3.Hardware failure:

If the iPhone keeps displaying the Apple logo, it may be due to a hardware failure, and you need to check the hardware or send the iPhone for repair. Your question has been answered for you! I hope to be able to help you, if there is something wrong, you can continue to consult, bear with me!