How to treat the surface of stainless steel door flowers, and what can be repaired after stainless s

First: do a line of fine line, since you do stainless steel doors, do a good job of its wholesale sales, don't add more burden to yourself.

Second: to make a door flower needs good equipment and consumables, of which the deployment of sulfuric acid water will be important, you can consult the specific configuration parameters to create an art door flower, they are the best.

Planer, galvanized, equal sign, many ways. It mainly depends on the ** given by the owner

Kiss is happy to answer for you: What can be repaired with stainless steel A: Kiss 1, polishing:

If it is a mirror panel, you can use the wool wheel to add polishing wax to polish. 2. Drawing: If it is a drawing plate, you can use a brushed cloth to draw it, and in doing so, you can repair the scratches on the surface.

3. Passivation: If the scratch affects the surface passivation film, then it is necessary to use the weld pickling passivation technology to treat the surface. What to do if there are scratches on stainless steel supplies 1. First of all, use a moist cloth or sponge to evenly apply the detergent to the scratches, and rub it repeatedly in the same direction as the fine texture of the metal.

Of course, you need to use a damp sponge dipped in detergent every once in a while to check the number of inches, and carefully observe whether the scratches are gone. If the scratches have been removed, it is recommended to apply another layer of stainless steel polish or olive oil. 2. Of course, you can also apply a layer of toothpaste to the toothbrush, rub it in the direction of the particles in the metal, and then dip the toothpaste with a damp cloth or sponge to check the progress.

If the scratch hasn't cleared up, keep brushing and add as much toothpaste as needed. Of course, if the scratch has been successfully removed, it is only necessary to thoroughly clean the area and apply a layer of stainless steel polish or olive oil. 3. In addition, you can also use fine sandpaper for sanding, but if you are not very professional, it is best not to try it lightly.

Because in the process of sanding with sandpaper, you need to master a certain amount of strength. 4. It should be reminded that if the scratches are not removed by sanding with fine sandpaper, then it is recommended that you try to sanding with rough sandpaper until the scratches are eliminated, and then gently wipe with finer sandpaper until it is the same as other areas.

<> "Hello! We are glad to answer for you: stainless steel wide tan scratching can be repaired by polishing, drawing, passivation, sandblasting and other methods.

Polishing: If it is a stainless steel material for the mirror panel, you can use a wool wheel polishing wax to polish it; Re-repair the stainless steel surface, drawing: the stainless steel material of the drawing plate, Chunheng can directly use the brushed cloth for drawing; This repairs scratches on the stainless steel surface of the brushed sheet.

Passivation: After the stainless steel is scratched, the surface passivation film is affected, and the surface treatment can be repaired with weld pickling passivation technology. Sandblasting:

If it is a matte stainless steel material, you can use the sandblasting method to repair scratches.

Hello dear We are happy to answer for you. Polishing is fine. Normally, good stainless steel is not easy to darken, such as buying an electroplated stainless steel spoon, it is easy to darken.

Stainless steel products become darker after a long period of use, because a layer of oxide film is produced under the action of air, which will play a role in protecting the metal inside from continuing to be oxidized. I don't know if I can help you, I wish you a happy life.

1. Stainless steel anti-theft door flower:

Daily cleaning can be wiped with a soft dry cloth, if wiped with a damp cloth, it should also be wiped thoroughly with a dry cloth in time; If there is an oil stain, the hand stain can be wiped with a newspaper. Stainless steel should not be acidic, do not contact with acidic liquids such as oxalic acid or "toilet cleaner" for cleaning cement, once it is stained, it should be thoroughly cleaned with water and then wiped dry with a dry cloth. If there are stubborn stains or rusty spots, you can use the "scouring pad" used to clean the kitchenware and gently wipe it along the steel plate pattern.

2. Armored doors and solid wood doors

Daily cleaning can be wiped off with a dry cloth. If you want to renovate after a long time, you can first polish it with sandpaper and then apply (spray) varnish.

3. Steel and wooden doors:

It can be cleaned with common detergents such as dish soap and laundry detergent.

Stainless steel cleaner masterbatch.

1. Powder formula: stainless steel cleaning agent masterbatch + super ionic emulsifier + sodium silicate = stainless steel cleaning powder.

2. Water agent formula: stainless steel cleaning agent masterbatch + super ionic emulsifier + water + preservative + flavor + pigment = stainless steel cleaning agent.

Stainless steel cleaning agent masterbatch, is the latest research and development of Chengdu Hengfeng Hongye detergent factory for the production of stainless steel cleaning agent core masterbatch, has the following characteristics:

1. Particularly excellent performance.

1. It can quickly remove various old stains such as yellow spots, rust spots, scale, oxidation spots and so on.

2. It can quickly remove all kinds of industrial grease on stainless steel.

3. It can quickly remove all kinds of industrial dirt on stainless steel.

4. It can quickly emulsify various industrial and edible oils.

2. Broad applicability.

1. It is widely used for cleaning and emulsifying all kinds of stainless steel yellow spots, rust spots, scale, oxidation spots and other old spots, industrial greases, dirts and oils.

2. It is widely used for cleaning and emulsifying all kinds of edible oils, dirt and oils.

3. Production formula (adjust the proportion according to the cost).

1. Powder formula: stainless steel cleaning agent masterbatch + super ionic emulsifier + sodium silicate = stainless steel cleaning powder.

2) Super ionic emulsifier 1%.

3), sodium silicate 89--97%.

2. Water agent formula: stainless steel cleaning agent masterbatch + super ionic emulsifier + water + preservative + flavor + pigment = stainless steel cleaning agent.

2) Super ionic emulsifier 1%.

3) Water 89--97%.

4) Appropriate amount of flavor, preservatives and pigments.

Fourth, the production process.

1. Powder formula production process: Stainless steel cleaning powder is mixed and stirred evenly by mixing and stirring stainless steel cleaning agent masterbatch, super ionic emulsifier and sodium silicate in proportion.

2. The production process of water agent formula: the stainless steel cleaning agent masterbatch + super ionic emulsifier + water + preservative + flavor + pigment is mixed and stirred evenly in proportion to be the stainless steel cleaning agent.

What kind of flowers, scratched, polished.

Aluminum alloy door flower, also known as rare earth alloy door flower, titanium aluminum alloy door flower, is known as the treasure of door flower, solid and unique art. Because aluminum alloy is not susceptible to corrosion and fading, anti-theft performance, gorgeous and colorful joy everyone loves. The products are sold all over the country and more than 30 countries and regions such as Europe, America, Japan and Southeast Asia.

Stainless steel door flower refers to the pattern of the door, its purpose is embedded in the inside of the door leaf, playing a decorative role, a fine state is used in the stainless closed hall steel anti-theft door to destroy the land.