How to set the first page and the second page in the page border setting in Word to be different?

A few people upstairs seemed to answer the question. The main floor is a different border, not a page number.

Set different border methods:

To solve this problem, you only need to use the section method to set the page border of each section separately. The specific methods are as follows:

1) At the end of each page, insert a separator via the menu.

or consecutive) to insert a section break.

2) Position the cursor in the page where you want to set the page border, and then select the border shape and color you need through the menu command "Format Borders and Shading Page Borders Page Borders and select this section" in the "Application" drop-down selection box.

3) The rest of the pages can be set in the same way as above.

You can also set different margins this way.

paper size and paper orientation, etc.

Insert a separator at the end of the first page – next, then set the page border and click on the bottom right"applied to "—this section. The second page also applies only to the - section when setting the border.

Word page numbers are arbitrary.

1. Page numbers start from the second page.

1. Select "Insert - Page Number" to open the "Page Number" dialog box.

2. Uncheck the checkbox in the "Home page display page number" checkbox, and then click the "Format" button to open the "Page Number Format" dialog box.

3. Type the number "0" in the box after "Start Page Number".

4. Press "OK" to exit.

2. Page numbers start from any page.

1. Position the cursor at the top of the page where you want to start page numbering.

3. Select "View - Header & Footer" and position the cursor at the footer.

4. In the "Header and Footer" toolbar, perform the following operations in turn:

Click the Same as the previous button to disconnect the link from the same previous section.

Click the Insert Page Number button, and then click the Page Number Format button to open the Page Number Format dialog box.

Type the starting number in the box after Start Page Number.

Click the Close button.

3. The page numbers are not sequential.

If the page numbers of "Table of Contents" and "Text" need to be arranged separately, you can perform the following steps:

1. Position the cursor at the top of the page where you need to start renumbering.

3. Select "Insert - Page Number" to open the "Page Number" dialog box. Click the Format button to open the Page Number Format dialog box.

4. Type the number "1" in the box after "Start Page Number".

5. Press "OK" to exit.

Fourth, the page number is displayed in each column.

After the document is divided into columns, the page numbers are inserted as usual, and only one page number can be achieved per page. How do you get a separate page number for each section? This can be achieved by leveraging the capabilities of domains:

1. Select "View - Header & Footer", and position the cursor at the position of the page number in the left column of the footer.

2. Press the Ctrl+F9 function key at the same time, and a shadow "*2-1}}" will appear at the cursor position

5. Hover the cursor over this field**, right-click and select "Update Field", you can see the page number in the left column of the current page.

6. Select the field you just entered**, copy it, and paste it in the footer at the right column where the page number is placed.

7. Select the domain you just pasted, right-click and select "Switch Domain", and change the domain "*2-1}}" Change to "*2}}" and right-click to select "Update Domain".

There are generally two reasons for the occurrence of such a problem:

The first reason is that the page setup is different between the two pages.

The second reason is that the Hanging Indent and First Line Indent positions are different on the rulers on the two pages.

Solution: For the first reason, click Page Settings to see if it applies to the entire document, if not, click OK.

If there is no problem with the settings, it is most likely the second reason, the ruler

Check whether the "hanging indentation" and other positions on the two pages are the same, and adjust them to the same if they are not the same.

1. You can set the page to the same paper size through the page layout - paper size.

2. View Document View Outline View, delete the section break before the "Portrait" page;

3. Select the "Portrait" page, and set the page layout Page Settings Paper Orientation to "Landscape".

This is a cluster of cheating with page borders, and the solution is as follows:

1. First of all, we open a word document with a page border;

2. Then we click on the page layout;

3. After that, we click on the page border;

4. In the pop-up interface, we click on the four border positions in the diagram;

5. After that, we click OK;

Figure 1<>

In the Borders and Shading window, select the page border, select the line type that suits you from the ** type drop-down menu, select your favorite color for the color, make an appropriate change in width, and choose to apply to the whole document, as shown in Figure 2

Figure 2<>

Figure 3<>

Or we can in the Borders and Shading windows, select the Page Borders menu, in the Art type.

Figure 4<>

Figure 5 acres are buckets.

1. Go to"Design the border"

2. Select the appearance of the frame.

3. To adjust the distance between the border and the edge of the page, select it"option"。Make your changes, and then select"OK"

4. Select OK

First of all, we open the word software, create a new blank page, and then enter part of the text content in the page, as shown in the figure below.

Please click Enter a description.

After entering the text, we click on the page layout above and select the page border, and the page border settings page will appear. This is shown in the figure below.

Please click Enter a description.

After entering the page border setting page, we first set the style of the page border, the styles are box, shadow, three-dimensional, etc., we select the box style, as shown in the figure below.

Please click Enter a description.

Next, let's start styling the page border line, let's set the line style to hyperbola, as shown in the image below.

Please click Enter a description.

Then we set the color of the page frame, we can set the color of the frame line to light blue, as shown in the figure below.

Please click Enter a description.

Next, we set the width of the frame line to points and select Artistic None, as shown in the image below.

Please click Enter a description.

Please click Enter a description.

Finally, we look at the preview on the right to select and reduce the frames. Let's select all the frames to be there, as shown in the image below.

Please click Enter a description.

Once we're done, let's apply the settings to the entire document and click OK.

Please click Enter a description.

Please click Enter a description.

Click OK. When we are done, we can see the entire page border, just like we set up, a light blue hyperbolic page border, as shown in the image below.

Please click Enter a description.

This is not the cause of page breaks, but rather the insertion of section breaks, and only when the section breaks are inserted, the margins of the page will be changed.

Page layout, click on the layout, and select Apply to the entire document.

Create two blank documents in a word document, adjust the margins in the file-page settings, the first blank document top and bottom margins are adjusted to 1cm, the second blank document top and bottom margins are adjusted to 2cm, the first blank document sticks 10,000 words past, and the content that is automatically moved to the second page is cut and pasted to the second blank document, just one more step to cut and paste, I don't know if it can meet your requirements, I haven't found a way to set the margins of different pages in the same blank document for the time being,It may also be that my version of this word is low and there is no such function.,I don't know if the new version has this function.,You can ask other people.,But I think this method is quite simple.,Even if the same blank document can be set separately, I don't think the steps will be much simpler than this.,It's all in a word document and it doesn't affect saving and printing.。

1. Press the Show Hidden Markers button to display the markers in the document and find out whether there are section breaks in the middle of different pages. Just delete it.

2. If you really need section breaks, open the page setup dialog box, select the appropriate margin, and then apply it to the selection of the whole document, and then you can confirm it.

3. If there are other sections that need to be set in the document, then set the margins separately and use them to select this section.

The two pages are different, so your document should be sectioned.

The section breaks are displayed first, and after the section breaks are removed, the page setup is the same.

ps:The method of deleting section breaks,Because the 03word and 07word interface display is very different,I haven't used the 03 version for a long time,I'll tell you about the 07 method:Office in the upper left corner - word options - display - display all formatting marks,Delete it after display。

If you happen to be using 03word, then you can find me again

Format Painter, select a paragraph of text on the previous page, select Black and then select the Format Painter, and then select all the text you want to modify the format, you can achieve the same format as the previous one. Including fonts, sizes, paragraphs, and so on.

How to resize pages in a word document.

There are options such as distance in the page settings! Finally, remember to apply it to the entire document.

Page Setup to get it inside.

There is an option button in the border and shading dialog box, get the dialog box above, and adjust the margins according to the text selected in the test question.

Setup Steps:

1. Click the page layout --- page border button;

2. Pop up the border and shading dialog box, select the page border, and select the box in the settings; Click on the Options button;

In the settings of the border, there is an "option setting", select "Measurement By" as the text, and you can do it.

This is caused by setting a page border, and the solution is as follows:

1. First of all, we open a word document with a page border;

2. Then we click on the page layout;

3. After that, we click on the page border;

4. In the pop-up interface, we click on the four border positions in the diagram;

5. After that, we click OK;

How to set the page border:

word2007 2010 2013: Design - page border, set to none.

word2003: Formatting - Borders and Shading - Page Borders - Set to None.

You're talking about page borders. You can go to the design menu and click on None in the settings on the left.

2007 2010 2013: Design - page borders, set to none.

2003: Formatting - Borders and Shading - Page borders, set to None.