What are the procedures for handling fire conditions in the fire control room?

1.The system alarm equipment sends out a fire alarm, and the personnel on duty determine the alarm location.

2.The personnel on duty notify the relevant personnel (security guards, patrol personnel, etc.) to the scene with communication tools for confirmation.

3.Identified as a fire.

4.Notify the fire control room.

Call 119 to call the police and send someone to guide the fire truck closer to the fire scene.

2. Notify the leaders of the unit and organize volunteer firefighters to rescue the first disaster.

3. Turn on the fire accident broadcast to guide personnel to evacuate.

4. Start the corresponding fire-fighting facilities according to the situation.

All elevators descend one floor by floor, non-fire elevators.

Power. Cut off the non-fire power supply on the upper and lower floors of the fire floor.

Activation of fire separation facilities (fire shutters.

etc.). Start the smoke suppression fan.

Start the fire pump.

Activate other fire extinguishing equipment in the building.

6.Monitor the operation of fire-fighting equipment, accept feedback signals, and adjust the working status of equipment in time according to the development of fire.

7.After the fire is handled, the normal working state of each system is restored, and the time, location and cause of the fire are recorded.

1.Confirmation of the fire at the scene.

2.If it is not a fire, the fire control host will be silenced and reset; If there is a fire, the fire control host will be turned to automatic.

3.Activate fire alarm bells and emergency announcements, and ask all personnel to leave the building.

4. Notify the unit leaders and organize volunteer firefighters to fight the initial disaster.

5 If the fire is large, you need to call "119" immediately** to notify the local fire brigade to help extinguish the fire.

6. After the fire is handled, the normal working state of each system will be restored, and the fire time and location printed by the control host will be archived for future reference.

Legal Analysis: Emergency Handling Procedures for Fire Accidents in Fire Control Rooms.

1. After receiving the alarm display of the control equipment, the corresponding part of the alarm point should be verified in the position plan of the system alarm point;

2. A person on duty in the fire control room or notify the security personnel to quickly rush to the alarm site to verify the situation, and the automatic fire protection system operator is ready to implement the system operation in the control room at any time;

3. After the on-duty personnel and security personnel verify the alarm location on the spot, they should immediately notify the fire control room, and the automatic fire protection system operator should adjust the system linkage control device to the automatic state, and immediately dial "119" to the public security fire department, and explain the basic information such as the name of the unit where the fire occurred, the location of the location, the location, and the contact;

4. After the alarm, a person on duty in the fire control room should use the fire accident broadcasting system to notify the relevant departments and relevant personnel to organize evacuation and self-rescue work;

5. The operator of the automatic fire protection system in the fire control room should monitor the operation status of the system to ensure the normal operation of the automatic fire protection facilities in the building under fire conditions.

Legal basis: Criminal Law of the People's Republic of China

Article 114 Whoever endangers public safety by arson, flooding, flooding, or disseminating poisonous, radioactive, infectious disease pathogens, or other substances or by other dangerous means, but has not caused serious consequences, shall be sentenced to fixed-term imprisonment of not less than three years but not more than ten years.

Article 115 Whoever causes serious injury or death to a person or causes major losses to public or private property by setting fire, breaching water, or disseminating poisonous, radioactive, or infectious disease pathogens, or by other dangerous means, shall be sentenced to fixed-term imprisonment of not less than 10 years, life imprisonment, or death.

Whoever negligently commits the crime in the preceding paragraph is to be sentenced to fixed-term imprisonment of not less than three years but not more than seven years; where the circumstances are more minor, a sentence of up to three years imprisonment or short-term detention is to be given.

Summary. Hello dear, happy to answer for you! <>

The correct process for the fire control room after a fire is as follows:1Notify the fire brigade immediately:

Trigger the automatic alarm system and ensure that the alarm sensor is working properly. 3.Confirm the fire situation:

Use surveillance cameras or other available equipment to find out the location, size, and smoke distribution of the fire. 4.Take countermeasures:

The fire control room needs to urgently direct rescue personnel and firefighting equipment to arrive at the scene of the fire, while coordinating the response of other departments. 5.Provide accurate information:

Provide accurate fire information to fire brigades and other rescue personnel, such as the location of the fire source, the type of dangerous goods, etc., so that they can carry out targeted fire fighting and rescue efforts. 6.Real-time monitoring:

The fire control room needs to monitor the situation at the fire extinguishing site in real time and provide support and assistance to rescue personnel at all times. 7.Records & Reports:

Maintain accurate records, including the cause of the fire, the situation at the fire scene, the fire extinguishing process and results, etc., and report the fire information to the superior unit in a timely manner. In short, the fire control room needs to take action at the first time and coordinate the efforts of all parties to control the fire as quickly as possible and ensure the safety of personnel.

What is the correct process in the fire control room after a fire.

What is the correct process in the fire control room after a fire.

Hello dear, happy to answer for you! <>

The correct process for the fire control room after a fire is as follows:1Notify the fire brigade immediately:

Trigger the automatic alarm system and ensure that the alarm sensor is working properly. 3.Confirm the fire situation:

Use surveillance cameras or other available equipment to find out the location, size, and smoke distribution of the fire. 4.Take countermeasures:

The fire control room needs to urgently direct rescue personnel and firefighting equipment to arrive at the scene of the fire, while coordinating the response of other departments. 5.Provide accurate information:

Provide accurate fire information to fire brigades and other rescue personnel, such as the location of the fire source, the type of dangerous goods, etc., so that they can carry out targeted fire fighting and rescue efforts. 6.Real-time monitoring:

The fire control room needs to monitor the situation at the fire extinguishing site in real time and provide support and assistance to rescue personnel at all times. 7.Records & Reports:

Maintain accurate records, including the cause of the fire, the situation at the fire scene, the fire extinguishing process and results, etc., and report the fire information to the superior unit in a timely manner. In short, the fire control room needs to take action at the first time and coordinate the efforts of all parties to control the fire as soon as possible and ensure the safety of personnel. Bright demolition.

1. Alarm procedure:

1. After receiving the fire alarm signal, the fire control room should notify the volunteer firefighters or the security guards of the shopping mall and quickly go to the alarm point for confirmation; At the same time, the fire room attendant silences and resets the alarm signal of the fire alarm controller;

2. If there is no fire, the cause of the alarm should be ascertained, corresponding measures should be taken, and records should be made carefully;

1) If the fire detector is a false alarm, the cause of the false alarm should be identified: whether there is a large amount of dust and smoke trapped at the scene; whether the airflow velocity is excessive; whether there is high-frequency electromagnetic interference;

2) If it is a "manual fire alarm button" alarm, it should be found out who started the alarm and recorded it, and the "manual fire alarm button" should be reset at the same time.

2. Fire confirmation handling procedures:

1. If there is indeed a fire, the on-site inspection personnel should feedback information to the fire control through the walkie-talkie or fire **, and use the on-site fire extinguishing equipment to extinguish the fire.

2. The personnel on duty in the fire control room start the relevant fire-fighting equipment according to the fire situation, notify the relevant personnel to extinguish the fire, report to the leader on duty in the shopping mall, and call 119 to the fire department after the consent of the leader.

3. After the fire is confirmed, if the fire is large, the fire control room duty personnel should implement control operations for the following facilities:

1) Stop the fans of the relevant departments, close the fire dampers, and pay attention to receiving their feedback signals;

2) Start the smoke exhaust valve of the smoke prevention and smoke exhaust fan box of the relevant parts, and pay attention to receiving its feedback signal;

3) If the fire linkage control cabinet is in the manual state, the sprinkler pump should be turned on and the feedback signal should be paid attention to, and the action signal of the water flow indicator, the action signal of the wet alarm valve, and the action signal of the pressure switch should be paid attention to; Start the fire pump and pay attention to the feedback signal;

4) If the fire linkage control cabinet is in an automatic state, it should pay attention to whether the water flow indicator is moving, whether the wet alarm valve is moving, whether the pressure switch is moving, and whether the fire pump is moving;

5) Notify the relevant personnel to close the fire door of the corresponding part;

6) Send out a control signal to force the elevator to stop at the first floor, and pay attention to receiving its feedback signal; If the control room cannot control the elevator to stop on the first floor, assign a security guard to the first floor of the floor, turn on the elevator fire control switch, and make the elevator stop on the first floor;

7) Cut off the non-fire power supply at the fire scene;

8) Turn on the fire alarm device and fire accident broadcast in the evacuation order.

The fire control room refers to the organization responsible for receiving and processing the fire alarm signal, and the fire disposal process refers to a series of processing steps carried out by the fire control room after receiving the fire alarm signal. Generally speaking, the fire control room fire disposal process consists of the following seven steps:

Confirmation: The fire control room should confirm the fire alarm information, including confirming the remaining fire location, the size of the fire, and the situation of personnel.

Command: Qinghuai in the fire control room should issue command orders to the on-site command center and fire brigade to coordinate the forces of all parties to extinguish the fire and rescue.

Scheduling: The fire control room should dispatch the fire brigade at the scene, coordinate the strength of each unit, and ensure the orderly progress of fire fighting and rescue work.

Monitoring: The fire control room should monitor the fire scene, grasp the changes in the fire situation in time, and adjust the fire fighting and rescue strategy.

It should be noted that the fire alarm disposal process in the fire control room may vary from unit to unit and location, but the overall process is generally similar. In the event of a fire, the fire control room should respond quickly and deal with it in a timely manner to ensure that the fire is effectively controlled and minimize the loss of personnel and property.

1. The fire control center implements a 24-hour rotation system.

Second, the monitoring center on duty personnel must have a high degree of vigilance and a high sense of responsibility, and be able to operate the equipment proficiently.

3. The personnel on duty are not allowed to smoke, drink, or meet guests in the monitoring center, and are not allowed to carry out other activities unrelated to work.

4. Personnel on duty shall not leave their posts without authorization during their work, and if there are special circumstances, they shall be replaced by other personnel on duty before leaving.

5. Each operating handle (button) of the monitoring center should be manually operated and checked once a day.

6. The appearance of the equipment of the fire monitoring center without dust is qualified.

7. When the equipment failure of the monitoring center cannot be eliminated by the personnel on duty, it should be reported to the director of the management office as soon as possible and the technical personnel should be contacted for maintenance.

1. The staff on duty in the alarm monitoring center should stick to their posts and carry out dynamic and static all-round 24-hour monitoring of the key and critical parts of the hospital.

2. After receiving the fire signal and fire alarm in the monitoring area, the monitoring center should immediately use the walkie-talkie to notify the on-duty personnel and patrolmen of the security department to rush to the scene, and notify the leader on duty.

3. After the personnel on duty rush to the scene, if there is no fire, they should find out the cause of the warning signal and make a detailed record.

4. If there is a fire, according to the fire situation, immediately dial "119" to report to the fire brigade, and feedback the information to the monitoring and alarm center, and at the same time carry out fire extinguishing and evacuation work.

5. According to the fire situation, the monitoring center mobilizes relevant personnel to start fire extinguishing and emergency plans.

6. When encountering a sudden fire, you should immediately call the police and quickly leave the disaster danger area.