Why do some Win10 point shutdown after the black screen directly enters the shutdown interface?

If the power is occasionally turned off and crashes, only press the power on and off button to turn it on, and you have to unplug the power supply if you can't (if you can't turn it on, you have to reinstall it).

1) Isn't that true for your computer? If not, how did you operate before the computer could not be turned off or was slow? What hardware has been installed, what is it, can you please tell me about it? (If there is an occasional shutdown crash, please press the power on and off button to turn off the power on).

If such a problem arises, the driver is not suitable, or the system problem is caused, can you restore the system, or not reinstall the operating system, do not install software, patches, drivers, etc., and see if there is still a problem with the shutdown? If you don't install drivers, patches, and software step by step, and find something that isn't suitable, don't install it.

2) In addition, it is caused by the card, such as CPU and other hardware temperature is too high, or playing games, watching **, or operating large programs, or the computer has been used for a long time, at this time it is very stuck, you have to have some patience to wait for the computer to recover slowly, click on every page on the computer to recover slowly, and so on to return to normal after shutting down, if it is still not, just press the power on and off button to shut down (if the computer is on for too long, my experience is, Restart the computer every once in a while, release the cache, and then play better).

3) If the above methods can't solve the problem, first soft and then hard, reinstall the operating system, don't install software, patches, drivers, etc., and see if there is still a problem with the shutdown? If you don't install drivers, patches, and software step by step, and find something that isn't suitable, don't install it.

Please note: If you restore the system or reinstall it, when installing drivers, patches, software and other things, be sure not to install the things that affect your accident this time, otherwise it will be restored or reinstalled in vain.

4) If it is caused by hardware problems, it is recommended to overhaul it.

This is a problem encountered after updating to 1903.

Hello, after installing the win10 system, the host is still running after shutdown for the following reasons:

1."Enable Quick Enable" is turned on;

2.The graphics card drivers are not updated;

3.There are no computer viruses that are detected and killed.

After installing the win10 system shutdown, the host is still running the solution:

1. Turn off the "Enable Fast Startup" option.

1.Start menu, select "Settings" and open it.

2.In the settings window, click "System [Display, Notifications, Apps, Power]".

<>4.In the Power Options window, click on "Select the function of the power button" on the left.

<>6.In the "Shutdown Settings" section, uncheck the box in front of "Enable Fast Startup" to save the settings.

2. Uninstall and update the graphics card driver of the computer.

1.Right-click on the desktop computer, select "Properties" to open and enter, and open the device manager on the left.

<>2.Right-click on the graphics card and select "Uninstall" to uninstall the current graphics card driver.

3.In the process of confirming the device uninstallation, select Remove driver software for this device.

4.After uninstalling the driver, reinstall the driver with the driver CD, or reinstall the graphics card driver of the official website** device, of course, you can also ** driver wizard to automatically identify the device driver for installation.

3. Detect and kill computer viruses.

When the problem cannot be dealt with by the above methods, you can use antivirus software to perform a thorough antivirus on the computer to eliminate the situation that the virus causes the computer cannot be shut down.

1. Press the power button to turn off when you boot into the system, repeat about 3 times 2.

3. The guard comprehensively examines the computer and kills the Trojan horse and repairs the computer.

4. Unplug the graphics card and memory module, erase with an eraser, and then use a brush to clean the slot dust and fan, replace the memory slot, etc.

6. You need to "one-click restore" or "reinstall the system".

Cause: It is caused by a software error, and it is recommended to delete the recently installed software.

1. First press and hold the power button to force the computer to shut down, then restart the computer, and press and hold the power button to force the shutdown when the computer boot logo appears, and repeat the step several times.

2. Then in the pop-up auto-repair interface, click to open the "Startup Settings" setting option in the advanced options.

3. Then in the startup settings interface that pops up, click to select the "Restart" option in the lower right corner.

4. Then in the pop-up window, press the number key or the function key "4 or F4" button.

5. On the desktop of the win10 system, find the icon of this computer, right-click, and click "Properties". As shown in the figure below. Or directly press the keyboard's shortcut Windows key + pausebreak key. Open System Properties.

6. In the open system properties window, click on the "Control Panel" window in the upper left corner.

7. In the open control panel window, click "Uninstall Program" under "Programs" in the bottom left corner.

8. In the uninstall program window, find the recently installed program software, such as 360 Security Guard, right-click on it - Uninstall, and click Uninstall.

9. Finally, restart the computer.

There is a very strange situation after the laptop installs the windows10 system, every time the computer is turned on, the black screen is always unable to enter the desktop, and only by pressing the power button to force the shutdown and restart can enter the system, what is going on? In fact, the problem is mainly caused by the incompatibility between win10 fast startup and your computer. Below, I will share with you the solution that the black screen after win10 is turned on and needs to be forced to shut down and then turn on before entering the desktop.

Recommended:

Solution: Turn off win10 fast startup

1. Click the start menu and select "Settings", and select "System" after entering the settings;

2. After turning on the system, select "Power & Sleep", and select "Other Power Options" on the right side;

3. Open "Power Options" and find "Change the function of the power button", (this is the same);

4. After entering, click on the "More dry stool to change the settings that are currently unavailable";

5. Uncheck the first item "Enable Fast Start (Recommended)" in the "Shutdown Settings" at the bottom of the window, and click "Save Modification".

Win10 After booting up, the black screen needs to be forced to shut down and then turn on before entering the desktop, and the solution is introduced here. The fast boot function is Microsoft's latest fast boot technology, but if the hardware is not compatible, it will bring some boot failures, and friends who encounter the same problem can quickly solve it as long as they follow the above methods.