Regarding the question of the tweeter of the speaker, how can the same speaker have a woofer and a t

The tweeter has a small stroke, a high vibration frequency, and does not have a large stroke like the mid-bass. Refers to the left and right channels, not to the two speakers. If the mid-woofer is small.

The low end is not much better. Loud volume distortion. It's not enough to say in a few words.

It may be that the power amplifier is too low. It is caused by not being able to push the horn when the big dynamic. Use the two female fingers to gently press the braided cone of the mid-bass.

Use even force. Feel the sound of no circles. If you have it, the horn is not very good.

If your speaker can be turned on, put some sponge inside the speaker. or sound-absorbing materials such as cotton. Let's improve it.

The speaker is what we usually call a bookshelf speaker, it is composed of two cabinets, the shape of the two cabinets is basically the same, in which the cabinet called the main box is placed in the power amplifier circuit, and the other is called the sub box. Generally speaking, both cabinets will use a two-way design, including a tweeter and a mid-bass speaker, and the cabinet structure will generally adopt a reverse phase design, which is simple to design and achieves the most balanced performance. In the field of multi-** speakers, it is the earliest to appear, and it is also the mainstream in the current market.

The so-called, 2 refers to two-channel stereo, generally using R for the right channel and L for the left channel. 0 means there are no separate bass channels. The structure of the loudspeaker is designed with the woofer in the same cabinet, so only two cabinets are needed to form a full-band stereo cabinet.

From a listening point of view, speakers are more suitable for appreciation**.

If you want to achieve the effect of HIFI, you need to be professional**, then you have to 5000 yuan + If you want to feel the impact of treble and bass for a few hundred yuan, it is recommended to buy one below 500 yuan.

The speaker is generally composed of 2 small boxes, and a unit with 5 subwoofers.

The design is emphasized for the bass, but the current ** accompaniment has been emphasized on the bass, so that after amplification, the bass makes people feel very cool (the normal stress should be a warm feeling) people who don't know how to pay more attention to the bass, connoisseurs will notice whether the treble is clear and thorough, whether the midrange is sonorous and powerful, whether the bass is thick, and the emphasis is on the sense of layering.

In order to perform well in an all-round way,The speakers are trying to broaden the width of the audio frequency response that can be displayed,Try to cover a wider frequency,Now the more popular is coaxial sound and full-range audio,The frequency response width of the speaker on this kind of audio is very wide,Almost all the frequency bands of high, medium and low bass,Ordinary audio needs to be equipped with tweeter and woofer up and down respectively,To be responsible for**treble and bass segment。 The excellent SV Sovay coaxial audio just organically combines the tweeter and the mid-woofer into the same speaker, realizing the coaxial sound, that is, the high, medium and low bass are emitted from the same speaker, and one speaker tops two speakers. The following is the difference between the sound of ordinary horns and SV Sovay coaxial horns:

The sound propagation focuses on the treble, and the power must be more than twice that of the bass. The bass, on the other hand, focuses on the general range of the vocal range, which should be able to respond in the 100Hz range. It is recommended that the woofer power is 120W and the tweeter power is 80W.

Hello:— 1. The "round hole" on the speaker is called the "inverted hole". The subwoofer is designed in such a way that the airflow from the inverted hole is in phase with the speaker diaphragm, which can increase the "shock".

2. The design of the inverted hole has a cavity type, and it is also a diaphragm type, and the vibrating and cracking of the latter is an empty paper cone without a horn. Judging from the effect of the virtual source god, the bass of the hollow inverted hole is sufficient.

Speakers are divided into bass loudspeaker generators, midrange speakers, tweeters, and full-range speakers in terms of playback frequency range. Shenghe.

Therefore, the tweeter is a speaker (unit) that reproduces the signal of the high frequency in the speaker system.

In fact, the so-called bass, midrange and treble do not have a completely strict frequency separation line, they are all relative concepts. For example, if there are two loudspeakers, one with a playback frequency range of 60 5K Hz and the other speaker with a playback frequency range of 1000 18K, the former is the woofer (driver) and the latter is the tweeter (unit).

The structure of the tweeter includes a cone speaker, this cherry dome speaker, and a horn speaker. In HIFI systems, dome tweeters are the majority.