Hello! Position lock module abnormal2 Please replace the set top box How to deal with it

The position locking module is abnormal 2, please replace the set-top box, and the positioning method is as follows after the change:

1. When the prompt window of "Location information changed, please contact the customer service center" appears, you first need to restore the factory settings of Huhutong: open the "Main Menu" of Huhutong and find the "System Settings" item to enter;

2. From the pop-up "System Settings Need to Enter Password" window, enter the super management authority password "9999" and press the "OK" button on the remote control to enter.

3. Then switch to the "Factory Reset" tab, and press the "OK" button on the remote control to perform the factory reset operation.

4. Next, turn off the power of the set-top box and open its back cover, insert the local ** card (Unicom, mobile card) into the SIM card slot, and insert the smart card at the same time;

5. Turn on the power of the set-top box again, and turn off the power of the set-top box when the "Position module abnormal" prompt window appears on the screen;

6. Then reinsert the encryption card that comes with the set-top box, restart the boot, the set-top box will automatically search and restore the TV program, and at the same time, you will find that the TV program can be normal, you can remove the mobile phone SIM card, and use the set-top box to **TV program normally.

There are 1 reasons, the position lock module fails to reset or upgrade, reboot it to let it upgrade automatically, it takes about 5 minutes, do not adjust the platform and do not cut off the power. 2. The position locking module cannot be connected with the set-top box or cannot be powered by power, and the set-top box needs to be opened and re-plugged, which is recommended to be done by the franchise point or installation team.

The position lock module displayed on the set-top box is abnormal2, please replace the set-top box processing:

For machines whose position information has changed in the original installation place (i.e., there is no displacement), the prompt "The position locking module displayed on the set-top box is abnormal2, please replace the set-top box" appears and operates according to the following methods:

1. After pressing the "F1" button on the remote control, the corresponding dialog box appears;

2. Use the channel + button on the remote control to move the "cursor" to the "base station information", and press the "confirm" button 3-5 times;

3. Re-scan the base station information, and the problem is solved.

After the above operations, the set-top box will return to its normal working state, and there is no need to replace the set-top box or return to the factory.

It should be noted that if the set-top box is moved out of the initial installation location, the above operation will be invalid, and you must find the seller to cancel the original account opening first and re-open it with a new installation address.

Is the set-top box set in place with a mobile phone card?

The position lock module displayed on the set-top box is abnormal2, please replace the set-top box. What to do.

Hello dear! We're happy to answer for you! "Position Lock Module Exception 2" is a hint of a set-top box hardware failure, which usually means that the set-top box needs to be replaced or repaired.

You can try the following steps to fix the problem:1: Restart the set-top box:

Unplug the set-top box from the power outlet, wait a few minutes, and then plug it back in and turn on the set-top box. :2: Check the connection:

Update your set-top box software: If the firmware of your set-top box is outdated or incorrect, follow the manufacturer's instructions to update your set-top box software. :4：

Contact after-sales service: If none of the above methods can solve the problem, it is recommended to contact the manufacturer of the box or after-sales service provider for further assistance. They may need to replace or repair the set-top box hardware.

Please note that if the set-top box is still under warranty, the replacement of the cherry blossom calendar or the repair of the set-top box may be done free of charge. However, if the set-top box is out of warranty, you may need to pay for repairs.

The position lock module is abnormal4, please replace the set-top box.

Hello dear, <>

The position lock module is abnormal 4, please replace the set-top box for the following reasons: the upgrade failure of the module next to the trembling, the module itself is abnormal, and the abnormal lack of the module reset circuit often causes "position lock module abnormal 4". If the module fails to upgrade, as long as the module is not hung up, after the set-top box is turned on, the set-top box will be forced to upgrade the module, do not cut off the power in the intermediate process, and wait for the upgrade to be completed; If the module hangs up or the module itself is abnormal, this is a factory repair.

Abnormal reset circuits will also cause module abnormalities in the upgrade process; Oak can inspect the relevant circuits; Unable to search the base station information, please contact the installation and maintenance personnel or customer service center I hope mine can help you, I wish you a happy life.

The position lock module displayed on the set-top box is abnormal2, please replace the set-top box. What to do.

The position locking module is abnormal 2, please replace the set-top box, and the positioning method is as follows: 1. When the prompt window of "location information changes, please contact the customer service center" appears, you first need to restore the factory settings of Hutong: open the "main menu" of Huhutong and find the "System Settings" item to enter; 2. From the pop-up "System Settings Need to Enter Password" window, enter the super management authority password "9999" and press the "OK" button on the remote control to enter.

3. Then switch to the "Factory Reset" tab, and press the "OK" button on the remote control to perform the factory reset operation. 4. Turn off the power of the set-top box and open its back cover, insert the vertical local ** hall fiber card (Unicom, mobile card) into the SIM card slot, and insert the smart card at the same time; 5. Turn on the power of the set-top box again, and turn off the power of the set-top box when the "Position module abnormal" prompt window appears on the screen; 6. Then reinsert the encryption card that comes with the set-top box, restart the boot, the set-top box will automatically search and restore the TV program, and at the same time, you will find that the TV program can be normal, you can remove the mobile phone SIM card, and use the set-top box to **TV program normally. Hunan Telecom provides the best quality network communication service, it is recommended that you apply for Hunan Telecom broadband and ITV set-top box, and the activities can be directly queried through the telecom business hall or physical business hall.

The position lock module displayed on the set-top box is abnormal2, please replace the set-top box. What to do.

If your set-top box displays the message "The display position locks module abnormally2, please replace the set-top box", it may be caused by the hardware failure of the set-top box or the abnormal software system. You can try the following methods to troubleshoot and solve the problem:1

Restart the set-top box: Power off the set-top box, wait for a few minutes, and then plug it back in and turn it on again. Sometimes there may be an abnormality in the software system, causing the prompt to appear, and restarting the stove top box may solve the problem.

2.Check the network connection: If you are using a network set-top box, you can check whether the network connection is normal.

If the network connection is unstable or faulty, it may cause an abnormal prompt to appear in the set-top box. 3.Contact Customer Service:

If none of the above methods can solve the problem, you can contact the customer service of the set-top box and consult the customer service for specific solutions. The customer service agent may ask you to perform specific operations or replace the set-top box. If none of the above methods can solve the problem, it is recommended that you replace the set-top box or contact a professional technician for repair.

We hope you find this information helpful. If you have any further questions, you can continue to ask me questions and I will do my best to answer them.

The position locking module is abnormal 2, please replace the set-top box, and the positioning method is as follows after the change:

1. When the prompt window of "location information changes, please contact the customer service center" appears, you first need to restore the factory settings of Huhutong: open the "Main Dish Sail Rubber Fuel Order" of Huhutong, and find the "System Settings" item to enter;

2. From the pop-up "System Settings Need to Enter Password" window, enter the super management authority password "9999" and press the "OK" button on the remote control to enter.

3. Then switch to the "Factory Reset" tab, and press the "OK" button on the remote control to perform the factory reset operation.

4. Turn off the power of the set-top box and open its back cover, insert the local ** card (Unicom, mobile card) into the SIM card slot, and insert the smart card at the same time;

5. Turn on the power of the set-top box again, and turn off the power of the set-top box when the "Position module abnormal" prompt window appears on the screen;

6. Then reinsert the encryption card that comes with the set-top box, reboot the boot, the set-top box will automatically search for and restore the TV program, and at the same time, you will find that the TV program can be normal**, you can remove the mobile phone SIM card, and use the set-top box normally to **TV program.

You can change the network box to watch network TV,Network smart TV or box viewing**Generally, it is not paid,Only hardware money is needed。 The next aggregation grip punch software can watch TV after the pure network in the network**Install sofa butler software,Sofa butler is the largest smart TV application market,There are a lot of free**software,There are also live broadcasts that sell skins。

Pro: The position is locked, the module is abnormal 2, please repair or replace the set-top box: 1. Try to open the card again, if it has been inserted and inserted correctly, the card is still unsuccessful, and the module is judged to be damaged.

2. When the card is opened and authorized, there is a prompt of "Module Position Lock Abnormal 2", and you can try to open the card again. If this issue persists, check for damage. This area is not covered by the card.

3. "Module position lock abnormal 3" prompt appears in the card opening authorization: Under the premise of not replacing the module without permission, it is generally due to the weak signal of the Nian Yuan Oak base station and the first upload of information is not completed, please try to open the card repeatedly, if the card is opened halfway through, suddenly replace the module, please first cancel the account on the **, and use the "ABS erasing tool to clean up". Finally, try to open the card again.

The position is locked, the blind width module is abnormal 2, please repair or replace the set-top box method:

1. Try to open the card again, if it has been inserted and inserted correctly, the card is still unsuccessful, and the module is judged to be damaged.

2. When the card is opened and authorized, the prompt "Module Position Lock Abnormal 2" appears, and the card is tried again. If this issue persists, check for damage. This area is not within the scope of the card opening.

3. "Module position lock abnormal 3" prompt appears in the card opening authorization: Under the premise of not replacing the module without permission, it is generally due to the weak signal of the local base car station, and the first upload of information is not completed, please try to open the card repeatedly, if the card is opened halfway, and suddenly replace the module, please cancel the account first on the **, and use the "abs erasing tool to clean up." Finally, try to open the card again.