How do I use my lights properly when driving on the highway at night?

About the word "high beam dog", I believe everyone is not unfamiliar, this word is a term for people who use high beams unreasonably, especially in urban areas with transparent lights, so what about on the highway? Can I use high beams? The middle separation zone is not high, and when you can see the headlights of the opposite lane, switch to the low beam, and then switch back after passing; The principle of safety first, do not intend to be in the opposite lane and the car in front.

Keeping others safe is also safekeeping yourself.

<> some say that low beam is used, and some say high beam is used, so which statement is correct? I said no, because the traffic law does not require the use of low or high beams to drive at night on the highway. According to our duty experience, high beams are used when there are few cars, for example, there are few cars in our jurisdiction at night, you can use high beams, good vision, and low beams are recommended for more cars.

The driving speed is fast, there are requirements for the line of sight distance, and the high beam is a necessary means to ensure the sight distance on the road where there is no light at night and is relatively idle. Highway night driving, fast speed, complex road conditions, limited vision, only turn on the high beam to get the maximum field of vision, to give yourself enough reaction time, so highway driving on the high beam is a must.

When it comes to lights, many people think of the term high beam dog, which is a sarcastic statement against the indiscriminate use of high beams in urban areas. The use of high beams in urban areas, on the one hand, let the driver of the car in front of him look very dazzling through the rearview mirror, and on the other hand, when the car will be cared, let the other party drive the road at night, the speed of the car is fast, the line of sight is poor, and the risk factors are more than during the day, the uncle recommends that under normal weather conditions, the distance between the car in front is about 200 meters with low beam, and the distance between the car is more than 200 meters with high beam. This is just a general suggestion, because everyone's vision highway has a minimum speed of 60 per hour and a maximum speed of 120 per hour, and generally large trucks will drive in the rightmost lane, because this type of vehicle is slower, and some sections of the road stipulate that large trucks are not allowed to drive on the left side of the road.

When driving on the highway at night, do you turn on the high beams or low beams? Whether it is for old drivers or novice drivers, the three words "Yuanguang Dog" can be described as "deeply rooted in the hearts of the people"! Many new and old drivers have this question - do they use high beams or low beams when driving at high speeds at night?

Xiao Wan is here to tell you that if you are driving at high speed at night, it is best to turn on the high beams. First of all, most of the high-speed sections have isolation belts, and the use of high beams in general family cars and SUVs will not affect the oncoming cars on the opposite side, so you can use them with confidence. Secondly, most of the high-speed sections do not have street lights, if you use low beams, the lighting situation will be poor, in the case of fast speed, what conditions on the road may not have time to react, easy to cause accidents.

Of course, if you pass through a highway section without a separation zone, when there is an oncoming car on the opposite side, you still have to switch to low beam to avoid obstructing the view of the oncoming traffic. After the interaction between the cars, switch to the high beams and continue driving. If the other party's high beam gets in the way, you can switch the high and low beam three times in a row to remind the other party that if the other party cuts the low beam, you can also cut the low beam, and if the other party does not react, you can also continue to use the high beam, there is no need to be humble in this situation.

Apart from the highway, what sections of the road are it necessary to use high beams?

If the road lighting is not good in the non-high-speed section, you can use the high beam first, and the opposite car will switch in time to ensure safety.

In addition, we should also remind everyone to pay attention to one point, do not use headlights because the road lighting is enough, the headlights of the vehicle have two functions, the first is to let others see you, and the second is to illuminate the road in front of you, especially in the tunnel, it is recommended to turn on the headlights, so as not to cause accidents when other vehicles can not see your car when changing lanes. Rational use of lights, scientific use of lights, and standardized use of lights, so as to ensure the safety of car travel, I hope to help new and old drivers.

First of all, when driving on the highway at night, you can turn on the vehicle's high beams. Secondly, the owner is not required to force the high beam to turn on, and some highway lighting conditions are better and do not need to turn on the high beam. So how to use lights correctly when driving at high speed at night?

On the highway, there is usually a divider to separate the road, which is higher than that on the city road, and we turn on the high beams without affecting the view of the driver in the oncoming lane. On the highway we are spaced wide, so turning on the high beams will not interfere with the view of the vehicle in front. It can be seen that at the beginning of the design of the expressway, the owner needs to turn on the high beams, and some designs have been made to ensure the sight and safety of other vehicles.

However, it is necessary to remind all car owners that when passing through tunnels or in heavy rain and foggy weather, do not turn on the high beams. First, because the lighting in the tunnel is sufficient, and there is a light difference when entering and exiting the tunnel, it is recommended that the owner switch the low beam to pass through the tunnel. Second, in heavy rain and foggy weather, turning on the high beams is easy to cause diffuse reflection, resulting in obstruction of vision.

It's best to alternate lights. so as not to obstruct the view.

The high beams can be turned on at high speed at night, and the low beams can be turned off when the light can reach the rear of the vehicle in front. When entering the tunnel, remember to turn on the low beams. In rainy or foggy weather, turn on fog lights, low beams, side lights, front and rear side lights, and avoid using high beams.

When overtaking at night, switch between high and low beams to notify the vehicle ahead.

Highways are usually separated by dividers at a higher height than on city roads, so that we can turn on the high beams without affecting the view of the driver in the oncoming lane. And on the highway, we will have a large distance between the cars, so turning on the high beams will not interfere with the view of the vehicles in front of us. At the beginning of the design of the expressway, the owner needs to turn on the high beams, and some designs have been made to ensure the sight and safety of other vehicles.

Therefore, when driving at high speed at night, whether to turn on the high beam or turn on the high beam, there is no need to have any psychological burden, which not only makes your vision range farther and wider, but also reduces the fatigue of driving to a certain extent.

When driving normally, turn on the night lights and width indicator lights. If there is no car in front of you, you can turn on the high beams appropriately, briefly observe the road and surrounding conditions in the distance ahead, and then quickly switch to low beams.

Be sure to turn on the rear taillights to prevent someone from rear-ending, and try not to use the high beams, because you will shine on the mirror of other people's cars and reflect the light, affecting your own driving.

High beams should be activated when driving on highways at night and converted to low beams when following vehicles close to them. If you want to overtake, you need to use the left turn signal to overtake.

Running high-speed lights at night is very important, and novices learn to drive safer.

In general, the highway turns on the high beams at night.

Use lights correctly: Turn on your headlights and rear fog lights when driving at high speed after dark.

Alert nearby vehicles. For high beams, they can only be turned on when there is no vehicle in front of you and on the opposite side, and should be turned off immediately if you find a car, and try to avoid the use of high beams.

Check the condition of the car before departure: Once the car has a puncture, brake failure and other accidents at night, it will lead to various situations such as breakdown, overturning, rear-end collision, etc., threatening the road and personal safety.

Don't drive tired.

Fatigue driving makes people unable to concentrate on the source of the limbs, is prone to negligence, and is unable to make the correct response to the stove.

Explanation of car running lights

Daytime running lights.

There is no need to turn it on manually, as long as you light the daytime running lights, they will light up, if you don't turn them off, they won't go out, but the daytime running lights are not yet fully popular, only some vehicles are equipped, as long as they are used to remind the owner of the car in front during the day, the lights are generally white LED lights.

The principle of the reversing light is the same as the brake light, which does not need to be operated manually, the difference is that the brake light is red, while the reversing light is white. The function of the reversing light is to illuminate the road behind the vehicle, reduce blind spots, and also alert the vehicle behind it.

The brake light is not directly switched, but it will automatically light up when the brake is pressed, and it will go off when the brake is released, which is designed to avoid manual opening when braking, which will lead to a rear-end collision.

In the hail debate lamp**, the most puzzling thing is the low beam and the high beam, which look too similar, but are actually very different. The light line of the low beam is sloping downward, while the line of the high beam is straight forward, just like the direction of their illumination, the low beam hits the near, and the high beam hits the far.

A pair of similar fog lamps are front and rear fog lights, which should be left, front, and right, and the lines represent the direction of the light, fog lamps are mainly used in rainy and foggy days, because fog lamps have strong penetration, and they are easier to be noticed when the line of sight is not good. It should be noted that the front fog lights can be turned on separately, and the rear fog lights can only be turned on together with the front fog lights.

Marker lights. It is a light installed at the top of the four corners and rear of the car, which is used to indicate the width and height of the front and rear of the car, the light is white in the front and red in the rear, and is usually turned on at dusk, that is, it is mainly used when it is dark.

The turn signal is more familiar, generally speaking, lifting means that the right turn signal is on, and pulling down means that the left turn signal is on, this design is also to meet the human body's feelings and operational thinking.

Double flash is a red triangle button on the dashboard, which can be turned on for a long time, its function is to remind other vehicles of abnormal driving or malfunction to prevent rear-end collision, it should be noted that when the double flash is turned on, the turn signal is invalid, so it is a driving state, and it must be slow.

High-speed night driving opens:Width indicators, high beams and low beams should also be used reasonably.

1. Fog lights: Fog lights must be used in foggy weather. Fog lights have a strong penetrating ability, allowing the rear car to see the front car in time, and when using fog lights, it is best to use them with hazard warning lights. If the fog is too thick or doesn't clear for a long time, it's best to get off the highway as soon as possible.

2. Turn signals: use turn signals for high-speed lane changes, overtaking, and driving out of the highway into the highway, and observe whether there are lane change conditions to prevent the vehicles in the rear and the next lane from reacting.

3. Hazard warning lights: When the vehicle breaks down and cannot move or is parked in the emergency lane, be sure to turn on the hazard warning lights.

High-speed driving at night vertical guide:

First of all, turn on the high beams on the highway. There are no street lights on the highway, and the speed is fast, if you turn on the low beams, in case something happens to the Yu Selling Finger, the owner often has no time to react. So in order to ensure your own safety, please don't mind being a high beam dog, and there are isolation belts on the highway, don't care about the feeling of the oncoming car on the opposite side, and turning on the high beams also helps to see the road signs clearly.

Secondly, watch out for large trucks on the highway at night. There will be a lot of large trucks at night, and there will be safety hazards if you follow the large trucks. Therefore, on the highway, try to keep a distance of more than 200 meters from the big truck, if you can overtake, do not hesitate to increase the throttle to overtake, and then try to get as far away from it as possible.

In addition, you should pay more attention to the speed of the car when driving at night, because it is easy to get tired when driving at night, and people will not feel the speed. Be sure to keep an eye on the computer to avoid speeding. Also, don't drive too slowly, and you will be penalized if you drive below 80 km/h on the highway.

I don't know if you have noticed that most of the highways in my country do not have street lights, and there will be street lights only when they are close to the toll station or service area. This requires drivers who drive on the highway at night to use the lights reasonably and disadvantage the light, and more than 50% of the car owners do not know what lights to turn on at night at the highway is in line with the regulations. So let's popularize the rules for the use of highway lights.

Instructions for the use of highway lights

Since it is night driving, whether it is on the highway or on the general road, the wide indicator light must be turned on by renting dust. The width indicator light is also known as the small light, and when it is turned on, the width indicator light in the front and rear of the vehicle and the rear license plate light will be lit.

Highway Lights Instructions for Use of High and Low Beams

The use of high and low beams for high-speed night driving is a misconception that many novices have. High beams can be used for high-speed night driving, but the high beams and low beams should be used reasonably.

When the distance from the car in front is large, and the distance exceeds 150 meters, the high beam can be used; When the distance to the vehicle in front is shortened, switch to high beams.

When the highway meets traffic, if the separation zone in the middle of the road can completely block the lights, then the high beams can be maintained; However, if it is grass, street trees, iron fences, etc., which cannot completely block the light, you must switch to low beam when the distance between the two vehicles is 150 meters.

Fog lights for highway lights instructions

Fog lights must be used in foggy weather, because fog lights have a strong penetrating ability, allowing the rear car to see the front car in time, and it is best to use fog lights with hazard warning lights when using them. If the fog is too thick or doesn't go away for a long time, it's best to get off the highway as soon as possible.

Instructions for the use of highway lights for turn signals

Use turn signals when changing lanes at high speeds, overtaking, exiting and entering highways, etc., and choose to change lanes only when the conditions are available to prevent vehicles in the rear and adjacent lanes from relieving.

Hazard warning lights in the instructions for the use of highway lights

As mentioned earlier, hazard warning lights can be used with fog lights in foggy weather, and when the vehicle breaks down and cannot move or is parked in the emergency lane, the hazard warning lights must also be turned on. Especially at night when visibility is not high, it is best to park your vehicle under the street lights and let the lights fully illuminate your car to alert the oncoming traffic from behind.

At present, some highways across the country have been set up with electronic eyes to capture the use of lights that do not follow the regulations, and many car owners have been fined for violations. Failure to use lights on the highway is generally a fine of 100-200 yuan, and no points will be deducted.