How do car owners replace wipers themselves?

Once the car has been used for a long time, it is inevitable that some parts will age and need to be replaced, but there are some parts that do not need to go to the repair shop or 4S shop when they are replaced, and they can easily get it done, so today I will talk about a part on the car, that is, the wiper, what do you need to pay attention to when replacing it?

For men, there is really no need to buy too good wipers, basically twenty or thirty yuan can be bought, generally available online, but when buying, you must pay attention to the model, of course, most cars are basically U-shaped mouths, so as long as you choose the right model, and then choose the right buckle, so that you can basically buy it back and install it yourself.

If you say that you won't install it after buying it, then you can remember every step in the process of dismantling, I believe it is very simple for you, so this is also a very simple operation, as long as you buy back the model of the thing, it is basically OK.

Of course, how can the wipers extend their life when they are used in normal times? This is also a very important point, if the car is parked for too long, you can take the electrostatic brush to brush off the dust first, it is best not to spray the glass water directly, and then scrape directly, because the car has been parked for a long time, there may be some small stones between the glass and the wiper strip, if you scrape directly, not only the wiper blade is not good, but also your car glass is not good, so this is also a point that everyone needs to pay attention to.

Teach you how to change a car wiper? The method is simple and easy to learn, and you don't have to spend money to go to a 4S store anymore.

The steps to replace the wiper are as follows:In the first step, lift the metal wiper arm from the windshield, perpendicular to the windshield position and hold it stable.

In the second step, press the stopper and remove the old wiper blades, separating them from the metal arm.

Step 3: Insert the new wipers, gently turn the new wipers until the hook clicks into place and is secured, and put the wipers back on the windshield.

Wipers, also known as wipers, water dials, wipers or windshield wipers, are composed of electric motors, reducers, four-link mechanisms, wiper arm mandrels, wiper blade assemblies, etc., and are used to brush and scrape the equipment that is attached to the windshield of the vehicle to remove rain and dust to improve the visibility of the driver and increase driving safety.

Here's how to replace your car's wipers:1. First of all, we put a rag on the windshield in front of the wiper to avoid scratching the glass.

2. Then we stand up the wipers, preferably at a 90-degree angle to the wiper swing arm.

3. After we put it according to the angle, we can start to disassemble and assemble, first lift the rubber wiper blade with one hand, then remove the wiper blade as a whole, and break the rubber wiper horizontally with one hand below.

4. Then we use the other hand to press down on the main bracket to separate the wiper blade from the swing arm, so that the wiper can be taken down as a whole.

5. Finally, we can reinstall the new wipers.

Generally, the service life of the wiper is one year. It doesn't matter if it's from a 4S store or bought from outside.

Determine that the wiper is time to change: Clean the glass surface before confirming. Touch the surface of the glass with your hands to make sure that the glass is free of scratches and raised particles. Wipe the wiper strip with a cotton cloth, strictly prohibit vigorous efforts, and confirm whether the strip is scratched, deformed or jagged.

Under normal circumstances, if there is still a waterline or the sound is particularly loud, or it is not clear, you can consider replacing the wipers.

Explanation: Wipers, also known as wipers, water picks, wipers or windshield wipers, are equipment used to brush and scrape away rain and dust attached to the windshield of vehicles to improve the visibility of drivers and increase driving safety. Because of the legal requirements, cars in almost all places carry windshield wipers.

Vehicles such as hatchbacks and minivans are also equipped with wipers in the rear windows. In addition to automobiles, windshield wipers are also installed in other means of transportation, such as trains and trams. Some part of the engineering equipment, hope to adopt Thank you.

When you go to the car beauty and decoration store, you can replace it, or you can buy your own wiper blades with an operating process on the package, and follow the map.

Find a repairman and change the wiper blades yourself.

The steps to replace your car wiper are as follows:

1. Stand up the wipers.

2. Press and hold the clip.

3. Remove the wipers from the original car, but don't let the rocker arm bounce back and break the front windshield.

4. the front end of the clip in the middle for installation.

5. Tighten the clip inserted in the middle, and get into place when you hear a click.

6. The wiper size of the driver's seat and the co-pilot's seat of some models is different, generally the driver's seat is longer, and the co-driver's seat is shorter, which should be paid attention to when installing.

7. To install the wiper in the passenger seat, you need to look at the direction, and at the same time you need to tighten it, and when you hear a click, the installation will be completed.

Summary: First align the wiper card slot and the plastic part in the swing arm; Then aim at the wiper card slot with both hands and press it hard, when you hear a "click" sound; Finally, move the rear wiper from side to side to make sure the wiper is secured.

Shakespeare once said: No matter how beautiful things are, they will be lost one day. And the wiper blades we are talking about are no exception, it may just be a matter of the length of use, when the aging of the wiper is very serious, it needs to be replaced in time.

So how often do you change the wiper blades, if you want to know the answer, read on.

Generally speaking, the replacement cycle of wiper blades is 1-2 years, but it still depends on the quality of the wiper blades. Because poor quality wiper blades often do not have good heat resistance. Then under the long-term scorching sun, it will not only reduce the service life of the wiper blade, which may need to be replaced in less than half a year, but also has a great impact on the wiper effect.

So if you buy a bad quality wiper blade, it's best to replace it with a new one.

Replacement steps for wiper blades:

1.First, raise the side wiper arm in the driver's position at 90 degrees, and then raise the passenger-side wiper arm.

2.Then lift its U-shaped buckle and pull down the wiper and take out the wiper blades. But be careful with the rocker bouncing back so you don't hurt your fingers.

3.Then you can directly install the new wiper blades, press and hold the middle sides of the wiper, and lift the card cover up.

4.Finally, pass the cover of the wiper blade through the middle of the wiper arm, press the buckle and you're done.

Wiper use and maintenance guide:

1. Use the wiper to remove the dust on the surface of the windshield on a sunny day; Be sure to spray the glass with water; Do not dry scrape.

2. There are other stubborn and hard dirt on the glass; It should be cleaned by hand. These things can easily injure wiper blades; As a result, the wipers are not clean. Seriously; The motor of the wiper will also be affected.

3. When the wiper blades need to be lifted for car washing and daily cleaning; Hold the "back" of the wiper blades; Gently send it back when you put it; Don't snap the wiper blade back.

4. When used in winter; Ice ballast on the windshield surface should be cleaned with an ice shovel first; so as not to increase the burden of the wipers.

1. In order to avoid damage to the windshield during disassembly, it is recommended that the owner put a cloth on the windshield when disassembling and installing the wiper, and support the wiper to change the angle of the wiper;

2. Then change the angle of the wiper blade, it is best to make it at a 90-degree angle with the wiper swing arm, because the wiper blade and the swing arm are stuck with clips, so it is easy to disassemble and assemble after a certain angle;

3. After putting it at an angle, you can start disassembling and assembling, first lift the rubber wiper blade with one hand, in order to expose the fixed hook of the wiper swing arm and the wiper blade, remove the wiper blade as a whole, break the rubber wiper blade horizontally with one hand below, and press the main bracket down with the other hand to separate the wiper blade from the swing arm, and then the wiper blade can be taken down as a whole;

4. The installation is not difficult, first pull up the cover in the middle of the wiper blade, pass the wiper support through the middle, buckle into the bayonet of the wiper, tighten the final cover and add the cover.

Teach you how to change a car wiper? The method is simple and easy to learn, and you don't have to spend money to go to a 4S store anymore.

There are two kinds of wiper blades, one is screwed, such as the earliest batch of Toyota bread; There is also a hook type, when replacing the screw-type wiper blades, you can directly use a flat screwdriver to unscrew the screws and replace them with new ones. When changing the hook wiper blade, pay attention to a clip at the base of the wiper blade, first grasp the wiper arm with your left hand, break the clip with your index finger with your right hand, and move forward with both hands at the same time, then the wiper will fall off gently. Remember, when picking up new wiper blades, gently lower the wiper arm so that it rests against the glass, otherwise, if you are not careful, the glass will be broken.

The wiper is composed of a motor, a wiper arm and a wiper blade, it is difficult to change the motor, if you change the arm, you can see the fastening screws by turning over the waterproof cover at the root, and fix the new one at the same angle after removal.

Stand up the original wiper first;

Press and hold the clip underneath to move out;

Remove the wipers from the side of the original car, but be careful not to let the rocker arm** hit the wind in front of you;

The middle clip is warped up earlier to facilitate installation;

After inserting the middle clip, tighten and listen to the source open until it clicks and it is in place; Some models have different wiper sizes for the driver's seat and the co-pilot's seat, generally the driver's seat is long, the co-driver's seat is short, don't pretend to be reversed, it doesn't matter if the two are the same size; Install the windshield wiper in the passenger seat, pay attention to the direction, tighten it all the way, and complete the hail when you hear a click.