How to change the parameters of the CNC lathe if they are wrong?

The parameters are incorrect? In the normal operation and use of CNC lathes, as long as it is not artificially modified, its system parameters will not change, and the system parameters are generally set by the manufacturer at the time of delivery, and there is no need to modify them.

If the accuracy of the parts added out is not up to standard, it should be a mechanical failure, it should be a hardware problem, the use time is not long, it is estimated that the quality of the bed is not too good, after using it for a period of time, the positioning error of the servo transmission mechanism increases is a reason that affects the machining accuracy, which is almost not related to the bed coding, system parameter error, you think about it, the system parameters are not right, in the process of use, some functions may not be realized, or it is a running error, there will be obvious failures, It will not just be able to process normally but the accuracy is not up to the table, and in my personal opinion, the accuracy is not up to standard, the problem is more serious, the system parameters are wrong and modified correctly, it will be fine, the mechanical failure is laborious to repair, even if the new parts are replaced, how much time can be guaranteed that the same problem does not occur.

You reset it on top, and you're putting all the axes back to their original point.

Which parameter is incorrect? What is the specific failure?".

The husband we know... Just ask me.

Summary. In the case of a Fanag system, press the software on the panel, find the Machining Element option via the menu extension key, press it, and then follow it to the zero option, and press it.

If it is a Fanak system, press the software on the panel, find the processing component through the dish, judge the single and change the expansion key, select the state celebration item, press it, and then follow the zero option, and press it.

How to process the number of pieces.

Most systems can change the parameters, and some press a button on the panel to clear 0

How to add or subtract? Press the "Cancel" and "N" keys in the position interface, then on the MDI mode, and then switch to Hushan Talk, find the number of processed parts in the year, and press Enter after modification.

Change on the panel?

Different systems operate differently, but most systems are modified on the panel.

I'm talking about changing it on the panel, how to change it???

Press the software on the panel to find the Machining Component option via the menu extension key, press it, and then follow it up to zero the option.

How do I add numbers after zeroing?

Press the "Cancel" and "N" keys in the position interface, then on the MDI mode, and then switch to Hushan Talk, find the number of processed parts in the year, and press Enter after modification. No.

Hello dear! How to modify the number of parts processed by CNC machine tools? It is not possible to change the number of machined pieces.

When clearing, press the "Cancel" and "N" keys in the location interface. If you want him to show fewer pieces than he actually is, you can clear the zeros first, and then remove the semicolon after the machining program M30, so that the system does not count. CNC lathe is one of the most widely used CNC machine tools.

It is mainly used for the cutting of the inner and outer cylindrical surfaces of shaft parts or disc parts, the internal and external conical surfaces of arbitrary taper angles, the internal and external curved surfaces of complex rotary and cylindrical and conical threads, and can be grooving, drilling, reaming, reaming and boring. [1] CNC machine tools automatically process the processed parts according to the pre-programmed processing program. We put the processing process route, process parameters, tool movement trajectory, displacement, cutting parameters and auxiliary functions of the parts, in accordance with the instructions specified by the CNC machine tool ** and the source sequence format of the program to compile the processing program sheet, and then record the content of the program sheet on the control medium, and then input the He Zhen state into the CNC device of the CNC machine tool, so as to direct the machine tool to process parts.

Hope it helps!

This is a typical unstable phenomenon, which will be big and small. That is to say, the accuracy of your workpiece has exceeded the existing accuracy of the machine tool, and the scrap rate is relatively high.

This situation is usually due to excessive force on the x-axis, perhaps caused by the impact of the machine tool, or the machine tool is too old. The backlash of the machine tool is too large, and so on. The solutions are:

Adjust the backlash of the x-axis. If necessary, it needs to be done by a mechanic. By changing the path of the program and using the method of eliminating the gap (the same as the path of the general car), the phenomenon of scrapping due to dimensional instability can be greatly reduced.

Classification of CNC lathes:

CNC lathes can be divided into two categories: horizontal and vertical. There are two kinds of horizontal lathes: horizontal guide rail and inclined guide rail. High-grade CNC horizontal lathes generally use inclined guide rails.

According to the number of tool holders, it can be divided into single tool holder CNC lathe and double tool holder CNC lathe, the former is two coordinate control, and the latter is four coordinate control. Most of the double turret sleeper cars use inclined guide rails.

Daily maintenance of CNC lathes:

Here are a few examples of routine maintenance that are of a general nature.

1.Do a good job of cleaning and lubricating the guide rail surface every day, and the machine tool with automatic lubrication system should regularly inspect and clean the automatic lubrication system, check the amount of oil, add lubricating oil in time, and check whether the oil pump starts and stops regularly.

2.Check whether the automatic lubrication system of the headstock is working properly every day, and change the lubricating oil of the headstock regularly.

1. Press the (knife repair) key to enter the tool offset page, and press the page turn button to select the desired page;

2. Move the cursor to the position of the tool offset number to be locked;

Part 2 Operating Instructions.

3. Press the (convert) key, the current tool offset value is displayed in white reversal, and the tool offset value is locked, and it is forbidden to modify; Press the (Convert) key again to unlock it.

The commonly used tool methods of CNC lathes include ordinary tool setting method, automatic tool setting method, off-machine tool setting instrument tool setting method, fixed-point tool setting method and trial cutting tool setting method. In practice, the corresponding method should be reasonably selected according to the specific needs. At the same time, it attaches great importance to the modification of the dimensional accuracy of the knife repair control, and uses the methods of knife compensation value modification, programming, program modification, and knife compensation modification to repair the existing defects and errors, strengthen the precision control, and improve the quality of product processing and manufacturing.

First, the modification of the CNC lathe tool compensation control dimensional accuracy method.

In the specific work, the above-mentioned cutting method is adopted, and more accurate cutting data can be obtained through the process of cutting and measuring. However, due to the influence of factors such as incorrect operation mode and method, low comprehensive skill of operator, inaccurate positioning accuracy of machine tool, insufficient repeatability and other factors, the accuracy of trial cutting tool is still limited, and it is difficult to effectively meet the precision requirements of the workpiece for processing and production. In order to make up for this defect and deficiency, measures should be taken to improve and perfect the workpiece to ensure the accuracy of the processing dimensions.

Specifically, there are several common methods.

Modified the knife complement value.

For the first time, the tool error or other reasons are large, exceeding the tolerance of the workpiece, and cannot meet the processing needs of the workpiece. In this case, in order to make up for the defects and deficiencies existing in the workpiece processing, the method of modifying the tool fill value can be used to improve and perfect, so that the workpiece size meets the requirements and improves the product processing accuracy. On the one hand, the absolute coordinate input method can be modified and improved.

In accordance with the principle of "large reduction, small increment", the modification is made in the filling in No. 001-004.

You pressed the wrong key.

You can enter the value 20 directly and press the input, or measure with x100 points!

Z31 measurement, is a letter with a letter without or your parameter settings are disabled, in, automatic gear, not switched to the handwheel is also not measured, can you tell me what you entered, which key was pressed?

Your permissions are insufficient.

Please set the permissions again, and turn the open parameter from lock to modify or allow.