Huawei Honor Play 5 How to install a card tutorial

Please use the included pin to open the card tray and transfer the corresponding SIM card.

Insert the tray into the tray and push it into the slot.

Note: When using the prick needle, please pay attention to safety to prevent poking your fingers or injuring yourself. Keep your prickle out of the reach of children and prevent them from inadvertently swallowing or injuring themselves.

Upper card slot (card slot.

1. Card 1) can be inserted into the micro-SIM card, under the card slot (card slot.

2. Card 2) You can insert nano-SIM card and microSD card, please do not insert and unplug SIM card and microSD card in the power-on state.

Please use a standard nano-SIM card, micro-SIM card, and pin, inserting non-standard cards and pins may damage the phone card holder or cause the SIM card to not be removed.

Honor Play 5 series mobile phones, which are mobile phones launched by Huawei, have a total of 2 products. The steps to install the SIM card are as follows:

1. Take the card tray.

In the shutdown state, find the card slot above the left side of the hand machine, and insert the card pin vertically into the small hole on the side of the card slot. Press firmly to make the Cato du pop out.

2. Look at Cato.

There is a text prompt on the card tray for the type of card: the inner card (also called card slot 1) only supports nano-SIM cards, and the external card (also called card slot 2) can put nano-SIM cards or microSD cards. zhi

3. Insert the card. Put the nano-SIM card and microSD card into the card tray DAO in the schematic direction, respectively, and pay attention to the direction of the notch. Note:

The phone can be inserted with 2 nano-SIM cards at the same time, or 1 nano-SIM card and 1 microSD card at the same time.

4. Insert the card tray back.

The screen of the mobile phone is up, push the card tray flat back into the card holder and turn on the version. Note: It is not possible to insert a nano-SIM card, microSD card directly into the holder where the card tray is placed, or use a non-standard nano-SIM card with a small cut.

Not even the card that the business hall helped to cut.

The steps to install the SIM card are as follows:

1. Take the card tray.

In the power-off state, find the card slot at the top of the left side of the phone, and insert the card pick-up pin vertically into the small hole on the side of the card slot. Press firmly to make the tray pop out.

Second, look at Cato.

There is a text prompt on the card tray for the type of card: the inner card (also called card slot 1) only supports nano-SIM cards, and the external card (also called card slot 2) can put nano-SIM cards or microSD cards.

3. Insert the card. Place the nano-SIM card and microSD card into the tray in the direction indicated, noting the direction of the notch. Note:

The phone can be inserted with 2 nano-SIM cards at the same time, or 1 nano-SIM card and 1 microSD card at the same time.

Fourth, insert the card tray back.

The screen of the mobile phone is up, push the card tray flat back into the card holder and turn it on. Note: It is not possible to insert a nano-SIM card, microSD card directly into the card holder where the card tray is placed, or use a non-standard nano-SIM card that is cut small.

Not even the card that the business hall helped to cut.

1、The card tray of Huawei Honor Play 6 is a dual card tray design in one,The card tray is on the top left side of the phone,You can insert two nano-SIM cards at the same time,Or a nano-SIM card and 1 microSD card。

2. Take the card tray, you can find the card tray at the top left of the mobile phone, and in the shutdown state, use the card pick-up needle that comes with the mobile phone to take out the card tray.

3. Insert the needle vertically into the small hole on the edge of the card tray.

4. Press hard to make the card tray pop out. Note: Pressing does not cause the card tray to pop out completely, it needs to be removed manually.

<>6. The wild card (also called card slot 2) can be placed with a nano-SIM card or a microSD card.

7. Insert the card, put the nano-SIM card and microSD card into the card tray according to the schematic direction, and pay attention to the direction of the notch.

8. The card tray with the card is flat, and it can be seen from the side that the card tray and the card are on the same plane.

9. Insert the card tray back, the mobile phone screen is up, and push the card tray back into the card holder.

10. When pushing back the card tray, you can gently press down on the nano-SIM card or microSD card to prevent the card from being slightly jacked up by the shrapnel that comes into contact during card insertion.

The specific steps are as follows:

1. First find the card tray at the top of the left side of the mobile phone, insert the card pin vertically into the small hole on the edge of the card tray, and press hard to make the card tray pop out.

2. Then take out the card tray in the new interface.

3. After that, in the new interface, put card 1 and card 2 into the card tray according to the schematic direction, and pay attention to the direction of the notch.

4. Then insert the card tray back in the new interface. The screen of the mobile phone is up, push the card tray back into the card holder, and after the card is inserted to confirm that it is correct, press and hold the power button to turn on the machine.

The steps to install the SIM card are as follows:

1. The mobile phone is designed with two card trays in one, which can insert 2 SIM cards at the same time, or 1 SIM card and 1 SD card;

2. Take the card tray, find the card tray at the top left of the mobile phone when the town is turned off, and use the card pin that comes with the mobile phone to take out the card tray;

3. Insert the card pin vertically into the small hole on the edge of the card tray, and press hard to make the card tray pop up;

4. Look at the card tray, there is a text prompt on the card tray containing the type of thick card, the inner card only supports SIM card, and the external card can be put SIM card or SD card;

5. Insert the card, put the SIM card and SD card into the card tray according to the schematic direction, and pay attention to the direction of the notch;

6. Insert back the card tray and mobile phone.

Honor Play 5A supports dual SIM dual standby single pass, SIM card 1 and SIM card 2 only support micro SIM card, in addition, the file is also requiredSupport micro SD card, up to 128GB expansion.

Here's how to insert the card:

1. Open the back cover of the battery

In the power-off state, find the notch of the battery back cover in the lower left corner of the pure back of the mobile phone, and open the battery cover along the arrow direction.

2. Look at the card slot

After opening the back cover, you can see that the phone has 3 card slots, which can insert 2 micro SIM cards and 1 micro SD card at the same time.

3. Insert the card.

Insert the Micro-SIM card and the Micro SD card into the card slot in the direction indicated (pay attention to the direction of the card notch), and push the card to the bottom of the card slot.

4. Close the back cover

Close the back cover and press and hold the power button to turn it on.

Honor Play 6 is a relatively best-selling Honor mobile phone, so do you know how to insert a card in Honor Play 6? Here's a guide to tell you the answer.

01 First of all, let's take a look at what the card slot of Honor Play 6 looks like, it uses a single two-hole card slot, as shown in the figure below.

02 Then we prepare the card needle that we will give when we buy the mobile phone, if there is no embroidery needle, it is also okay to replace it, and insert the card needle into the card slot on the side of the mobile phone.

03 Then the card slot will pop up, at this time we will take out the card slot smoothly, and then put the mobile phone card and memory card on it.

04 It should be noted that whether it is a mobile phone card or a memory card, it must have the chip side down, and then push the card slot into the fuselage by hand.

The specific steps to install the Huawei Honor Play 5C external memory card are as follows:

Tool: Huawei Honor 5c phone.

1. Find the card pick-up hole on the side of the phone, poke it hard with the card pick-up needle, and the tocard will automatically pop up.

2. Remove the pop-up tocard, find the larger card slot, the larger card slot, you can put the SIM card on one side, you can put the SD card on the other, find the side of the SD card, and put the SD card in.

3. After the external memory card is placed, insert the tocard smoothly.