What should I do if my Apple 4S phone is flooded

Apple mobile phone 4S moisture ingress three situations to deal with:

1. Falling into clean water when the power is on, this situation generally does not need to be disassembled.

1. Power off as soon as possible.

2. Shake it dry, but don't shake the machine off, the idea is to shake the water out of the screen. If there are water droplets left on the screen, there will be traces after drying. 3. Put it under a slight heat source such as a desk lamp and spotlight to let the moisture slowly dissipate. This process takes more than six hours.

Note: Do not use a strong heat source such as a hair dryer in a hurry. After these three steps of processing, the power supply can basically work normally.

2. Drop into non-corrosive liquid in the case of power failure. In this case, it can be basically assumed that the machine is not damaged, but the LCD screen may be ugly.

1. Shake dry vigorously, but don't shake off the machine.

2. If there is no trace on the LCD screen, it shall be processed according to Article 3 of the first point.

3. If there is something left on the screen and it is very serious, do not deal with it according to the first point and paragraph 3, because although the electronic circuit can work normally, the screen may be quite ugly. It can be sent to the nearest maintenance department for processing or dismantling the machine for cleaning by yourself.

3. Falling into non-clean water when the power is on, or falling into corrosive liquid or viscous liquid or other clean liquids regardless of whether the power is on or not. There is also a good chance that the machine will recover after proper treatment.

1. Power off as soon as possible.

2. If it is dropped into corrosive liquid (such as seawater), immediately rinse the machine with clean water. Or immerse the machine in clean water and try to dilute the corrosive liquid inside.

3. Disassemble the machine as soon as possible. But take your time when disassembling the machine.

4. Clean with alcohol or professional washing water.

5. Assembling. Or take the disassembled parts to the repair point and let the repair point clean and assemble them again for you.

According to my years of experience with Pingguo mobile phones, don't try to turn it on, immediately detain the battery, and blow the motherboard with a hair dryer. Hehe.

Slight near the water does not affect, temporarily not broken, I'm afraid, I bought it in the future!

Do not blow hot wind, beware of scalding the wax layer. It's not too much to say, and ordinary people can't turn on the mobile phone at all, and even if they turn it on, they can't close it. Xiu also answered in vain

Bring your warranty card to the shop and get it repaired.

It's a common thing.

The solutions to the water in the iPhone are: turn off the phone immediately, disassemble the phone, use absorbent paper, use a hair dryer, and put it in raw rice.

1. Shut down immediately.

When the phone gets into the water, the first thing to do is to turn it off immediately. Because the combination of water and electricity can cause a short circuit in the phone, which can damage the phone's hardware. If the phone is still running, it will cause an electric current to pass through the water, which can exacerbate the degree of damage to the phone.

Therefore, once the phone is in and out of the water, the first thing to do is to turn it off immediately.

2. Disassemble the phone.

If the water ingress of the phone is serious and needs to be cleaned thoroughly, then the phone needs to be disassembled. However, it takes a certain amount of skill and experience to disassemble the phone, and if you don't know how to talk about it, it's best not to try it. The phone can be sent to a professional mobile phone repair shop for processing.

3. Use absorbent paper.

If the water ingress into the phone is relatively slight, you can use absorbent paper to dispose of it. Take your phone out and gently wipe it with absorbent paper to absorb the moisture. However, be careful not to push too hard to avoid damaging your phone.

4. Use a hair dryer.

If the water ingress of the mobile phone is serious, but you don't want to disassemble the mobile phone, you can use a hair dryer to deal with it. Take your phone out and use a hair dryer to dry the moisture on the surface of your phone. However, be careful not to turn the wind on your hair dryer too hard to avoid damaging your phone.

5. Put it in the raw rice.

If the water ingress into the phone is slight, but you don't want to use absorbent paper, you can put the phone in the raw rice. Because uncooked rice has the effect of absorbing water, it can absorb water from the surface of the mobile phone. However, be careful not to leave the phone for too long, so as not to get the rice grains into the inside of the phone, causing more serious problems.

Apple is waterproof, IP68 rated according to IEC 60529, up to 6 meters of water for up to 30 minutes, and protected against accidental spills of common liquids such as soda, beer, coffee, tea, and juices.

What to do if the iPhone gets into the water

1. When the iPhone falls into the water, get it out of the water as quickly as possible.

2. Turn off the iPhone immediately, once the iPhone falls into the water or enters the water, please disconnect the power immediately, because the damage of the mobile phone is often not caused by the water itself, but because of the short circuit of the internal components caused by the water, and even further lead to the burning out of the components or the battery**.

3. Dry your iPhone with a cloth, as dry as possible, you can wipe the screen, sides and back with a cloth or absorbent material, pay special attention to the power buttons, volume buttons, mute switches, speakers, microphones and audio output jacks, and try to wipe all the visible moisture to the naked eye.

4. After drying the Apple phone, if the motherboard does not enter much water, it should be able to turn on at this time, if you are not at ease, it is recommended to put the open iPhone in a ventilated place for 24 hours and then install the battery to try to turn it on

<> demo model: iPhone 12

System version: There are 5 steps to do if the iPhone enters the water and the black screen is black. Here are the specific operation steps to solve the black screen of Apple phone in iPhone 12:

Steps.

Wipe your phone dry with paper after it gets into the water.

After the iPhone gets into the water, dry it with paper first.

The cold wind blows the hair dryer on the hole.

Use a hair dryer to blow cold air on the hole for 10-20 minutes.

The phone is placed in the bed for 2 hours.

After blowing, place the phone in the bed for 2 hours.

Continue to blow with the hair dryer for 1 minute.

Continue to blow with a hair dryer for 1 minute.

The phone restarts after 20 minutes of charging.

Finally, the phone is charged for 20 minutes and restarted. end

Summary. What should I do if my iPhone gets into the water, Hello dear, take the phone out of the water as soon as possible, and turn it off immediately. This is very important, whether the screen is black or not, please quickly shut down to prevent the motherboard from being burned out by short circuit, if you press and hold the power button to turn off, please press and hold the power button and the home button until the system shuts down.

Take out the SIM card, remove the phone case and other items, and use a paper towel or cloth to remove the water from the outside and crevices of the body. Wipe the SIM card as soon as possible after it is removed. Note that the headphones and power connector can be plugged in and blotted dry with a small cotton swab or paper towel strip.

Wrap the body with an absorbent towel or paper towel to absorb moisture.

What to do if the iPhone gets into the water.

What should I do if my iPhone gets into the water, Hello dear, take the phone out of the water as soon as possible, and turn it off immediately. This is very important, whether the screen is black or not, please quickly shut down to prevent the motherboard from being burned out by short circuit, if you press and hold the power button to turn off, please press and hold the power button and the home button until the system shuts down. Take out the SIM card, remove the phone case and other items, and use a paper towel or cloth to remove the water from the outside and crevices of the body.

Wipe the SIM card as soon as possible after it is removed. Note that the headphones and power connector can be plugged in and blotted dry with a small cotton swab or paper towel strip. Wrap the body with an absorbent towel or paper towel to absorb moisture.

The current situation is that the water has ingested and it has not been shut down in time, and now the screen is spent.

Can this be repaired at a mobile phone store, and how much will it cost?

Hello dear, about 50 yuan.

Turn off, then shake it hard, try to throw the water out of the earphones or charging hole, shake it almost with a hair dryer to start blowing it, blow it for a while, repeat it a few times, after it's over, enlarge the phone in a rice bag or wrap it in toilet paper and wrap it with tape, and then say it after a while, it's good, if it's not good, send it for repair

1. If the mobile phone falls into the water, it should be quickly fished out of the water, and the body should not be shaken when it is turned on.

2. Wipe off the water on the phone case.

3. Immediately go to a nearby repair shop to disassemble and clean up.

Precautions: 1. Do not use a hair dryer to quickly dry the moisture in your mobile phone.

2. Don't shake the water on your phone hard.

The solutions to water in the iPhone are to turn off and disconnect the phone, remove the case and SIM card, wash and dry the phone, etc.

1. Turn off and disconnect your phone.

If water gets into the user's iPhone, the phone should be turned off immediately and the power and all connections should be disconnected. This will help prevent current from passing through the board and other components, reducing further damage.

2. Remove the case and SIM card.

If the user's iPhone gets into the water, the phone case and SIM card should be removed immediately. This will help speed up the drying process and reduce some of the internal damage.

3. Wash and dry your phone.

After removing the case and SIM card, the user can use a soft cloth or paper towel to gently wipe the surface of the phone to remove as much moisture and humidity as possible. If you need to clean the inside of your phone, you can use 99% medical alcohol or a special cleaning solution, but be sure to use it with care to avoid further damage.

An introduction to how to determine whether a mobile phone is flooded

1. Observe the appearance.

If there are obvious water marks or water droplets on the appearance of the phone, it means that the phone has entered the water.

2. Check the screen.

If there is a watermark, splash, black screen, flickering screen and other abnormal conditions on the screen, it means that the mobile phone has entered this water.

3. Check the buttons.

If the phone's keys are out of order or the keys are unresponsive, the phone has been flooded.

4. Check the camera.

If the camera is blurry, blurry, or cannot be used normally, the phone has been flooded.

5. Check the battery.

If the battery is swollen, deformed, or cannot be charged properly, it means that the phone has been flooded. In this case, it is best to send it to a professional maintenance personnel for repair, so that Hunger Rush can effectively solve a series of problems caused by water ingress into people's mobile phones.