-
According to the national policy, it is necessary to "read the meter to the household", but in terms of specific implementation, there are many problems that need to be solved;
First of all, the issue of property rights, the electrical facilities in the community are the assets of the property management company of the community, and the power supply company needs a lot of money to receive this part of the assets, and it is not cost-effective;
The second is the difficulty of management, the power supply enterprise is just a table for the community, once a month, charge a fee, the management is relatively easy, if all the residents in the community are collected, not only each home meter needs a large amount of costs, the installation of the meter, rotation, verification, accident handling, illegal theft of electricity investigation, meter reading, charging and increase a lot of workload, and thankless, power supply enterprises will not have enthusiasm;
Again is the loss has increased, when the property company management, the power loss of the distribution line in the community is of course borne by the property company, if the meter is really read to the household, the loss of the distribution network and the loss of the transformer in the community will be borne by the power supply company, ** loss as an important assessment index of power supply today, will not take the initiative to receive;
However, the residents of the community directly to the power supply enterprise metering, payment, from the service and other aspects of the benefit, is an inevitable trend, you can and other users of the community, please the local ** department to come forward to coordinate, the assets in the community free of charge to the local power supply enterprises, change the power supply enterprise energy meter, from the "transfer of households" to "direct supply households".
-
Two different and power sources are not allowed in the same place
-
Legal analysis: As long as the meter has been tested and certified by the national metrology department, it is OK.
Legal basis: Civil Code of the People's Republic of China
Article 942: Property service providers shall, in accordance with the agreement and the nature of the use of the property, properly repair, maintain, clean, afforest, and operate and manage the common parts of the property owners in the property service area, maintain the basic order in the property service area, and take reasonable measures to protect the personal and property safety of the property owners. For violations of relevant laws and regulations such as public security, environmental protection, and fire protection in the property service area, the property service provider shall take reasonable measures to stop it in a timely manner, report to the relevant administrative departments and assist in dealing with it.
Article 943: The property service provider shall regularly disclose to the owners the matters of service, the persons in charge, the quality requirements, the items to be charged, the charging standards, the performance conditions, the use of maintenance funds, and the operation and income of the owners' common parts to the owners in a reasonable manner, and report to the owners' general meeting and the owners' committee.
-
Summary. Hello dear, it is unreasonable for the community to install the electricity meter in the resident's home, and it should be installed outside the house.
Is it reasonable for some communities to install electricity meters in residents' homes?
Hello dear, it is unreasonable for the community to install the electricity meter in the resident's home, and it should be installed outside the house.
Extended content: Attention should be paid to the installation of household electricity meters: (1) The current amperage of the meter should be suitable for the total wattage of household electrical appliances.
Ampere meters are more suitable for households. (2) The voltage of the meter must be in line with the voltage of the power supply, the power supply voltage is 220 volts, and the 110 volt meter cannot be used, otherwise the voltage coil of the meter will be burned out and cause an accident. (3) The meter should be installed in a dry position, not above the kitchen or gas stove.
4) The installation height of the meter should be appropriate. The height of the meter center from the ground is meters. (5) The meter should be installed on the wooden board used for power distribution, and should be firmly installed on a reliable and dry wall, not on the door frame or wooden wall.
6) The wire wiring must be firm, and the wiring cannot be loose or poorly wiring, otherwise it is easy to produce sparks and danger.
-
Qinqin here for you to find out that the owners of the community can apply for an independent meter, and the owners of the community can apply to the power supply department to install the meter, but under the premise of complying with the relevant regulations and conditions. According to the Electricity Management Regulations, property owners can apply to the power supply department for the necessary electricity consumption facilities for single electricity users, and electricity meters are one of them. In terms of specific operation, the owner needs to apply to the property first and obtain the consent of the property, and then the property will apply to the power supply department, and the power supply department will install the meter.
How to bill for the use of electricity meters needs to be reasonably planned and implemented in accordance with local market supervision and power management regulations. In short, as long as the application is made within the legal and compliant regulations, the owner can enjoy the convenience of using electricity. If you need to apply for a power supply department to install a separate meter, here are some things to look out for:
5.Waiting for review and installation: Once you have submitted your application, you will need to wait for the power supply to review and install it, and the exact time will vary depending on the region and power supply.
-
Yes, the owners of the community can apply for the installation of independent meters by the power supply department. According to Article 18 of the Regulations of the People's Republic of China on the Administration of Urban Power Supply, users of collective power supply in residential areas and residential areas can apply for the installation of independent meters by the power supply department according to the actual situation. The specific operation steps are as follows:
According to the requirements of the power supply department, the owner needs to prepare relevant materials, such as identity certificate, real estate certificate, application form, etc., and fill in and submit the application materials as required. Installation of independent meters: The power supply department will review the actual situation and arrange staff to install the independent meters after the application is approved.
It should be noted that the application for the installation of an independent meter may need to meet certain conditions, such as whether the power lines, transformers and other facilities in the community meet the requirements for the installation of independent meters. In addition, homeowners may be required to incur costs when applying to install stand-alone meters, which may vary from region to region. The best course of action is to communicate with the power supply department before applying and understand the local policies and requirements to ensure a smooth application.
I hope the above can help you, I wish you a happy life!
-
Summary. Hello friends, the owners of the community can apply for the installation of independent meters by the power supply department.
Our community is not one household and one meter.
Hello friends, the owners of the community can apply for the installation of independent meters by the power supply department.
I would like to apply for a separate meter for the parking space and install a charging pile.
However, it needs to comply with the relevant regulations and conditions. According to the "Electricity Management Regulations", property owners can apply to the Liangye power supply department for the necessary electricity facilities for single electricity users, and independent electricity meters are one of them. In terms of specific operation, the owner needs to apply to the property first and obtain the consent of the property, and then apply to the power supply department, and the power supply department will install a single lighting meter, which is also very important.
-
Summary. Hello The installation of old meters in the new community is unreasonable, when the new building needs to be installed after the completion of the meter, the developer will directly contact the power supply company, and the power supply company will design and install the new smart meter in accordance with the common sense of electricity safety and electricity instructions, and the new smart meter is installed, the power supply company will not install the old meter in the new community, unless it is the developer without the permission of the power supply company, the temporary installation of excessive meters. Whatever the reason, it is unreasonable to install an old meter.
Hello The installation of old meters in the new small wide shouting area is unreasonable, when the new building needs to be installed after the completion of the meter, the developer will directly contact the power supply company, and the power supply company will be cautious in accordance with the common sense of electricity safety and the instructions for electricity use, unified design and installation, and are the installation of new smart meters, the power supply company will not install the old meter in the new community, unless the developer does not have the permission of the power supply company, the temporary installation of excessive meters by themselves. Whatever the reason, it is unreasonable to install an old meter.
Legal basis: Article 37 of the "Public Security Administration Punishment Law" stipulates that anyone who installs or uses a power grid without approval, or who does not comply with safety regulations in the installation or use of a power grid, shall be detained for up to 5 days or fined up to 500 yuan; where the circumstances are serious, they are to be detained for between 5 and 10 days, and may be concurrently fined up to 500 RMB.
Illegally pulling the power grid has the serious consequence of causing death or injury, and the act constitutes the crime of endangering public safety by dangerous means.
It may be that a vortex has been generated.
For example, if an insulated wire is wound around an iron core, and after the alternating current is turned on, the current becomes a closed loop in the metal block. >>>More
Full-power step-up transformers and step-down transformers can be used interchangeably. If the transformer reaches full power, it will not cause damage, if the copper-clad aluminum wire or aluminum wire transformer cannot be used in this way, because the power of these two types of transformers is not as sufficient as the power of the all-copper wire transformer. >>>More
The isolation transformer is a safety power supply, which is generally used for machine repair and maintenance, and plays the role of protection, lightning protection and filtering. >>>More
There are two ways to regulate the voltage of dry-type transformer: one is on-load voltage regulation, which is relatively simple, and directly adjusts its control switch. The second is non-excitation voltage regulation, dry-type transformer non-excitation voltage regulation is through the adjustment of the transformer itself, and there are two kinds of arrangement of the connecting piece, there are two rows up and down, three contacts above, three contacts below, and the other is arranged left and right, three on the left and right. >>>More
Step-up transformer refers to the instantaneous start of the voltage, at present, the domestic transformer manufacturers that can effectively achieve instantaneous step-up are relatively rare, which is also a pity, the step-up transformer instantaneously starts the step-up capacity is relatively strong, and the step-up effect is better. The difference is that the non-excitation voltage regulating switch does not have the ability to switch gears with loads, because this tap changer has a short-term disconnection process in the process of changing gears, and the disconnection of load current will cause the arc between the contacts to burn out the tap changer or short circuit, so the transformer must be powered off when the gear is adjusted. Therefore, it is generally used for transformers that are not very strict in voltage requirements and do not need to be adjusted frequently. >>>More