How to adjust the return rate of the mouse Does it hurt to adjust it to the mouse

It didn't hurt much.

The specific steps are as follows:

1. First of all, we click on the start menu button on the computer desktop.

2. Then we enter the interface and click on the Control Panel option.

3. Then in the control panel, select the viewing method as the small icon, and click the mouse in it.

4. Then in the mouse properties window that opens, click the [Hardware] option.

5. Then select a mouse name in it and click on Properties.

6. Then in the open interface, click the change setting button, in which you can directly adjust the mouse return rate, we can pull the selection value.

The so-called adjustment function of the return rate of the mouse refers to the adjustment of the DPI setting of the mouse, which can reduce or increase the DPI value of the mouse through operation, and its operation will not cause harm to the mouse hardware, and the common setting methods are as follows:

1) Take the Razer Purgatory Viper as an example and open the mouse drive software.

2) Select the "Macro" setting on the 4th or 5th button (side button), find "Enable return adjustment for this setting", and check it on.

3) When using, press and hold the set key, and then roll the mouse wheel to adjust the mouse DPI settings.

It should be the mouse frame rate adjustment, Logitech Mouse has always been famous for software support, as long as you install the corresponding Logitech mouse driver, use software to adjust the speed, click sensitivity will not cause harm to the mouse hardware! By the way, Logitech's mouse plays CS and other sensitivities are appropriately lowered, if it is too high, it will skip frames, try a few more times, it's very cool!

No, this one is fixed, I hope mine solves your confusion.

The mouse rate of return (i.e., rotation rate, sometimes called refresh rate) refers to the frequency of transmission between the mouse MCU (micro controller unit) and the computer.

Illustrate. For example, if the return rate is 125Hz, it can be simply assumed that the MCU sends data to the computer every 8 ms, and 500 Hz sends data every 2 ms. The rate of return is a mouse performance parameter that gamers attach great importance to, and theoretically speaking, a higher rate of return can give full play to the performance of the mouse, which is more practical for gamers.

However, the high rate of return also has higher requirements for the computer configuration, if the computer configuration is low and the mouse return rate is set to be higher, it will cause the mouse to drop frames, and the higher the return rate, the more power consumption, so many mice provide the return rate adjustment setting, usually set to 125Hz. Some gaming mice support 500Hz or even 1000Hz return rate, which allows the wireless mouse to play in intense games with zero lag and no frame skipping.

Mouse return rateIt refers to the transmission rate of the mouse WeChat control unit and the computer, the conventional 125hz mouse return rate means that the mouse communicates with the computer every 8ms, and the shorter the communication time required to double the return rate, the higher the return rate in theory, the better.

Common rates of return are 125Hz, 500Hz and 1000Hz, and the less common 250Hz. For the average gamer, a 500Hz mouse return rate is sufficient, a 1000Hz return rate may cause frame drops and affect the life of the mouse, and the higher the return rate for the computer CPU

The burden will be relatively large. Of course, the higher the rate of return is theoretically the better, but the 500hz rate of return is the most comfortable.

Mouse Resolution:

Mouse resolution (dpi) refers to the positioning accuracy of the mouse, in dpi or cpi, and refers to the maximum amount of information that can be accurately positioned per inch of mouse movement. An optical mouse with a resolution of 400cpi is sufficient.

The resolution of the mouse is one of the main criteria for choosing a mouse. The decisive factor in the performance of a mouse lies in the number of dots per inch of length that the decoding device inside the mouse can recognize, which is commonly known as resolution, in dpi or cpi. This means the maximum amount of information that can be accurately positioned per inch of mouse movement.

Resolution is a measure of the precision of mouse movements.

The hardware resolution reflects the actual ability of the mouse, while the software resolution simulates a certain effect through software.

The dpi colloquial saying is how fast your mouse pointer moves.

If the rate of return is 125Hz, it can be simply considered that the MCU sends data to the computer every 8ms, and 500Hz sends data every 2ms. The rate of return is a parameter that gamers attach great importance to the performance of the mouse, and theoretically, the higher the rate of return, the better the performance of the mouse.

Any computer is fine, there are no computer requirements. It is also impossible to burn the mouse. It doesn't matter if the rate of return is a little higher.

The mouse uses walk-through communication, and each time it reports data, it sends a few bytes of data to the computer to report the movement of the mouse. The so-called rate of return is the number of times it is sent in a second.

For a computer, 1000 times per second is a very low speed, a few bytes at a time, and it is also a small amount of data.

Mouse return rateWhat kind of mouse is good?

Mouse return rateLow back gives you a disadvantage over the other when you do the same.

There are three things you need to pay attention to when choosing an FPS gaming mouse:

1. Light weight:

Players who are more familiar with FPS games should know that the mouse DPI is when playing FPS games

It won't be very high, so the range of movement of the mouse is quite large. Many newcomers think that the heavier the mouse, the more stable the control, but this is not the case. The lighter the weight of the mouse, the easier it is to control, and the less damage to the wrist, so it is best to keep the weight within 105g when choosing an FPS mouse.

2. There are fewer side buttons

FPS games are a category of games that use a mouse with high intensity, but there is almost no use of the side buttons and macro buttons of the mouse, and FPS games are a fair competition type of game that uses macro buttons (one-click pressure gun, burst shots, etc.) is equivalent to cheating, destroying the fairness of the game, so a mouse with fewer side buttons and a simple design is more suitable for FPS games. The main thing is that the side buttons will cause false touches, which will affect the gaming experience, and the multiple side buttons will also slightly increase the weight of the mouse.

3. The size of the mouse should not be too small, and the width and height are very important

In fact, the size of the mouse actually varies from person to person, and it has a lot to do with the grip of the mouse, but the author does not recommend choosing a game mouse that is too small. First of all, because of the frequent use of the left and right buttons, the finger part moves frequently, and the medium-sized mouse can play a good role in supporting the palm part, so that the finger bending range will not be too large, so as not to get tired. Because precise operation is often required, the configuration of the mouse can not be very high, but it must have strong stability.

The mouse rate of return refers to the transmission rate of the mouse WeChat control unit and the computer, the conventional 125hz mouse rate of return means that the mouse communicates with the computer every 8ms, the shorter the communication time required to double the rate of return, and the higher the rate of return in theory, the better. The mouse is an external input device for the computer, and it is also an indicator of the vertical and horizontal coordinate positioning of the computer display system, which is named because it resembles a mouse. The standard name should be "mouse", the use of the mouse is to make the operation of the computer easier and faster, to replace the cumbersome instructions of the keyboard.

Demo model: Huawei MateBook X System version: win10 The mouse return rate refers to the transmission rate between the mouse WeChat control unit and the computer, the conventional 125Hz mouse return rate means that the mouse communicates with the computer every 8ms, and the shorter the communication time required to double the return rate, the higher the return rate in theory, the better.

The mouse is an external input device for the computer, and it is also an indicator of the vertical and horizontal coordinate positioning of the computer display system, which is named because it resembles a mouse. The standard name should be "mouse", the use of the mouse is to make the operation of the computer easier and faster, to replace the cumbersome instructions of the keyboard.