What is the use of the side skirts, is it used to keep out the mud

It's okay, it's normal, that is, you have a cover, there will be mud inside, don't worry, I hope it will help you, thank you [If you have a problem with the car, ask the car master. 4S shop professional technician, 10 minutes to solve. 】

First find a way to clean the mud, and then buy one to match.

Go to the car wash and wash it [If you have a problem with the car, ask the car master. 4S shop professional technician, 10 minutes to solve. 】

The side skirts and front and rear spoilers are used to change the airflow of the body This is the use of aerodynamics to reduce the air resistance of the body or the car at high speed by changing the airflow to increase the stability of the body The top cover is generally a film The white car is more for the sake of looking good and sporty part of the modification of the hood is also to change the airflow Part of the modification is to add air intakes to facilitate the heat dissipation of the engine Carbon fiber material is light, one is hard enough and one is sporty (how to give a few more points if you are satisfied, I also like the car very much, so there is more research)

Spoiler semi-these things are used to improve your aerodynamics with kits. As for the use of carbon fiber is to reduce weight, in fact, aerodynamics play a very small role in my usual use of the car, you almost do not feel it, but if you modify carbon fiber, the weight of the body is reduced, even if you do not change anything else, you can still clearly feel the strengthening of the push back feeling.

Carbon fiber is to reduce the weight of the vehicle itself, and the thermal conductivity of carbon elements is good, there is also to talk about its own molecular structure, and the car with carbon fiber is fragile, is 90% carbon fiber spun into the cloth, in the resin or other gelatinous layer by layer paste vacuum, heating and compacting and other processes! I say this to show you that the resin and carbon-containing fibers are arranged in it, and the resin will greatly reduce the toughness of the carbon fiber when it dries, so as to protect the rider, and the impact of the fast and powerful will break it to pieces! It can minimize the impact force, reduce the danger and injury to the driver!

Car sports kits, such as surrounds, side skirts, spoilers, etc., called sports kits, also known as aerodynamic kits, front surrounds, side skirts are to allow the air to better "flow" around you, to minimize the air resistance brought by the speed, spoiler, commonly known as the rear wing, when the vehicle reaches a certain speed, let the air flow from the side of the vehicle, give the car appropriate downforce, so that the car does not float when driving at high speed.

As for the roof cover and hood you are talking about, are they vents? The piston movement of the automobile machine will produce a lot of heat energy, part of which is taken away through the coolant and part of it is transferred to the air by the engine metal, which will not volatilize in your hood, and the racing itself is to hold the clutch, some cars in Japan can reach 1w1, 1w3 or even higher, and the driver, but also to give full play to the performance of his car, generally will shift gears at the maximum working speed. That's why you need to add vents!

Like the heel toe used in the drift, that is, the left foot controls the clutch pedal, the right foot uses the forefoot to stabilize the brake, the heel of the right foot has to step on the accelerator, the heat generated by the clutch workmanship, tires, wheels, brake pads, brake calipers, engine, and various transmission programs, all parts of the workmanship will generate heat, so it is necessary to add air inlet and outlet.

To summarize the above explanation, in a word, there is a risk in changing a car, and there is no bottom line in investment.

There are many materials, but the first choice is carbon fiber!

Car side skirts, front spoiler, rear spoiler: these three things are produced by famous brand manufacturers after professional modification technician modification After correct tuning, the downforce of the vehicle can be increased at high speed If it is not professionally modified, it will increase the appearance and fuel consumption will also increase.

Top cover: It shouldn't be useful, it's just beautiful.

Hood: If there is a hole in the hood, it will increase the cooling rate of the engine compartment.

Carbon fiber or magnetic carbon material: It is made of ordinary cellulose as raw material, with high strength and light weight

Cooler. More personality! But not the original modification of the car. Changing it out will definitely detract from the original performance. Personally, I would recommend not changing.

The side skirt refers to the skirt plate installed on both sides of the car body, and the effect is also equivalent to that of the air dam, which is used to reduce the airflow on both sides of the car body into the bottom of the car. There is a certain turbulence effect, which can significantly reduce the air resistance under certain conditions.

Front spoiler, rear spoiler: mainly to increase the downforce of the car in high-speed driving, in order to increase the grip, the car will not float when driving, but the coefficient of change will not be very large, unless the wind tunnel test is done by a professional third-party car modification mechanism.

As for the roof and hood, the function is mainly ventilation and heat dissipation, but it will increase the drag coefficient of the vehicle.

Carbon fiber is a fibrous carbon material. It is a new type of material with greater strength than steel, smaller density than aluminum, more corrosion resistance than stainless steel, higher temperature resistance than heat-resistant steel, and electrical conductivity like copper, with many valuable electrical, thermal and mechanical properties.

As for magnetic carbon materials, it is not very clear at present, and it seems that the application will not be too widespread.

1.Lively patterns that make a dress of a regular style attractive. But the mini style is not suitable for thick legs mm.

2.The addition of ruffles makes the white shirt lively, and the gold accessories and long styles can cover up the lack of thick thighs.

3.The jeweled top enhances the overall sense of gorgeousness, ** without losing solemnity, and the mm with a wide crotch can be boldly tried.

4.The decoration of the chest covers up the lack of the chest shape, and the white bottoms have a sense of visual expansion, and the mm is suitable for petite figures.

5.The military skirt enhances the overall fashion feeling, breaks the simplicity of the white shirt, and the successful mm can be happily tried.

Illegal modification, I'm afraid it can become a black car.

It's not that the local strictness is not strict... Some places have not been the same as looking for scalpers. Or spend some money on PR.

Water soil is to add water to fill the soil, is like paint, diluted through the spray pen to spray the surface of the model, water soil can fill the small scars on the surface of the model, and can play a role in unifying the background color of the parts and increasing the adhesion of the paint.

Soil recharge is mainly divided into the following types: strip refill, anti-magnetic recharge and water refill. Strip filler is used to fill the gaps between the parts of the model (the filling of small gaps can be replaced by 502, which is economical) and the production of details, such as soil marks.

In the process of model making and processing, in order to eliminate defects such as cracks and gaps on the surface of the model or to show a certain effect, it is necessary to carry out soil filling work. Generally speaking, there are three ways of soil replenishment commonly used in the process of modeling, namely ordinary soil replenishment, plastic soil replenishment, and water soil replenishment.

Water soil is actually to add water to fill the soil, the water soil is not the same as other soil supplements in the use method, but like paint, diluted through the spray pen to spray the surface of the model, water soil can fill the small scars on the surface of the model, and can play a role in unifying the background color of the parts and increasing the adhesion of the coating. It is very important to unify the background color, for example, you have two parts, one black and one white, all of which should be sprayed yellow, because the yellow covering power is not very high, it is easy to be deep when sprayed on black, and it will be brighter when sprayed on white parts, resulting in the final color disagreement.

If there are many concaves, it is recommended that you still find a master of hardware in a 4S shop, which can be repaired well.

If it's small, look for an auto parts store to install side skirt wheel trims.