How many days does it take for a Level 2 Constructor to re register from start to finish

Constructor II.

The transfer of registration can be completed within about one month. Whether it's a first-class constructor.

In the change of registration of the construction engineer's professional qualifications, the original unit needs to agree to transfer out and seal, in addition, it is also necessary to seal the competent unit, and if the first-level construction engineer changes the registration across provinces, the provincial housing and urban-rural development department also needs to seal before the change of registration can be accepted.

According to Article 8 of the Regulations on the Administration of Registered Constructors, it takes 20 days to approve the registration change of second-level constructors. The specific regulations are as follows:

Article 8 of the Regulations on the Administration of Registered Constructors shall complete the review within 5 days from the date of acceptance of the application for the application for change of registration and renewal of registration.

The competent department of construction shall, from the date of receipt of the materials submitted by the competent department of construction of the people's government of the province, autonomous region and municipality directly under the Central Government, complete the examination and approval and make a written decision within 10 days. After receiving the application materials transferred by the competent department of construction, the relevant departments shall complete the review within 5 days, and send the review opinions to the competent department of construction.

1. The constructor fills in the change application information;

2. The original unit signs the consent opinion;

3. The current unit signs the consent opinion;

4. Print the application form;

5. In terms of new transfers, the enterprise unit should bring all the relevant materials to the external window of the provincial department to go through the formal change registration procedures.

Note: If you need to change to a place outside the province, you need to print the application form and need the signing of the construction department at the location of the original unit and the construction department at the location of the current unit.

Hello, after the registration of the second-level construction engineer certificate, the certificate is reviewed every three years, and each audit must participate in continuing education, (those who do not participate in the annual examination of continuing education will not pass) The time shall not be less than 30 hours in principle, and the management agencies and professional committees can be adjusted as needed. The compilation of teaching materials and the organization of training for continuing education in various regions and industries shall be respectively responsible for the management agencies and professional committees.

The registration certificate and practice seal are valid for 3 years, and within the validity period of each registration, the second-level constructor must meet the continuing education requirements stipulated by the construction department before applying for renewal of registration.

Continuing education is divided into compulsory and elective courses, each of which is 60 hours during the validity period of each registration. If the continuing education reaches the qualification standard, a continuing education certificate will be issued.

The specific requirements for continuing education shall be separately stipulated by the competent department of construction in conjunction with the relevant departments.

The Regulations on the Administration of Class II Constructors stipulate that the registration certificate and practice seal are valid for 3 years, and the application for renewal of registration shall be made after the expiration of 3 years. Continuing education can be attended once within 3 years and passed the examination, and the general construction administrative department should be held once a year, and you can pay attention to the notice on the official website of the local construction administrative department (Housing and Urban-Rural Development Department).

Where it is necessary to continue practicing after the expiration of the validity period of registration, an application for renewal of registration shall be made in accordance with the provisions of Articles 7 and 8 30 days before the expiration of the validity period of the registration. If the registration is renewed, it will be valid for 3 years.

Where an application is made for renewal of registration, the following materials shall be submitted:

1) Application Form for Renewal of Registration of Registered Constructors;

2) Original registration certificate;

3) A copy of the employment labor contract signed between the applicant and the employing unit or other valid supporting documents;

4) Proof that the applicant has met the requirements for continuing education within the validity period of registration.

Hello: The registration certificate and practice seal are valid for 3 years, and you should apply for renewal of registration after the expiration of 3 years.

Continuing education can be held once a year within 3 years and passed the examination, the general construction administrative department has to hold it once a year, and there are special ones that will be held for two years and then held for a year, you can pay attention to the notice on the official website of the local construction administrative department (Department of Housing and Urban-Rural Development), as long as there is a class to train, you can sign up.

3-6 months, depending on the location.

Materials to be provided to apply for renewal of registration: (1) Application form for renewal of registration of registered constructor; 2) Original registration certificate; 3) A copy of the employment labor contract signed between the applicant and the employing unit or other valid supporting documents; 4) Proof that the applicant has met the requirements for continuing education within the validity period of registration. More details about the second construction of Dali Education.

At least 3 months, depending on the region, it is recommended to consult the local personnel examination network or the Human Resources and Social Security Bureau**.

Generally, registration is valid within three years.

The registration of the construction engineer qualification is generally valid for 3 years, and 3 months before the expiration of the validity period, the certificate holder should go to the original registration authority to go through the registration procedures again. During the validity period of registration, those who change their practice units shall go through the formalities for changing them in a timely manner. Re-registration, in addition to meeting the provisions of Article 18 of these Regulations, shall also provide proof of continuing education.

The professional qualification of second-level constructors implements a unified national outline, and all provinces, autonomous regions and municipalities directly under the central government propose and organize the examination system. The Ministry of Construction is responsible for formulating the syllabus of the qualification examination for second-level constructors, and the Ministry of Personnel is responsible for reviewing and approving the syllabus.

As long as all the national registration certificates are taken and obtained, they can be registered. The requirement for the time period of the second-level constructor is that after three years of certificate registration, continuing education must be carried out in time, and if continuing education is not carried out, it will affect the next registration. Since the certificate registration is valid for a three-year cycle, the purpose of continuing education is to update knowledge and extend the validity period.

1. Print the Application Form for Initial Registration of Class II Constructors.

2. Original and photocopy of valid ID card (military ID, police officer ID, passport), academic certificate, qualification certificate.

3. Employment labor contract and copy (the original contract will be returned after verification) or the certificate of labor, personnel and wage relationship issued by the enterprise.

4. If the applicant applies for initial registration after three years from the date of issuance of the qualification certificate, and fails to register within the time limit, the applicant shall provide proof of meeting the requirements of continuing education and a copy before registration.

5. Apply for initial registration with the second-level registered construction engineer qualification certificate issued by the province (city). The above is the basic process of registering a second-level constructor, the registration is completed within three years, and the registration can only be carried out after continuing education is required after the deadline.

After receiving the second-level constructor certificate, apply for initial registration in the three-year category, and if you have not registered for more than three years, you need to apply for continuing education, and you can only register if you pass the continuing education.

As long as all the national registration certificates are taken out and obtained, they can be registered The requirement for the time period is that after the certificate is registered or attached for three years, continuing education must be carried out in a timely manner, and if continuing education is not carried out, it will affect the next registration Because the certificate registration is valid for a cycle of three years, the purpose of continuing education is to update knowledge and extend the period of use If you have two certificates of one and two construction, and it is the same major, you can only register the one with the highest level, If the two certificates are two different majors, the two can be registered at the same time, but there is one point, the registration is linked to the payment of social security, so the two certificates of different majors must be registered in the same company, and they are not allowed to be affiliated with the two companies

2z202030

Registration must be completed within 3 years of obtaining the qualification certificate (examination).

It is valid for as long as you register. However, if you have not registered for more than three years, you need to provide more proof of continuing education hours.

There are a few people who have come to share their experience in preparing for the second construction exam with you:

1. Don't be complicated to review the materials.

Friends who can take the second-level construction engineer exam are basically office workers, and their study time is limited, so everyone's choice of review materials is more expensive, not much. It is recommended that you just read the textbook, and if there is no new version of the textbook, you can continue to use the textbook of the previous year.

Second, the tense outline.

That is, to fully understand the requirements of the outline and the book"Mastery, familiar, understand"The three parts are classified, the mastery part accounts for 70% of the test score, the familiar part accounts for 20% of the test score, and the understanding part accounts for 10%, so the focus is on grasping the mastery part.

3. Review order.

1. It's best to review the regulations first.

In this way, you can have a certain systematic and framework understanding of the entire construction project, and the fifth and seventh chapters of the construction management on safety and engineering information files are duplicated with the relevant chapters in the regulations; Of course, because almost all of the regulations require memorization, and everyone will forget them after a long time, it can also be reviewed after the other two courses.

2. Then construction management 3. Finally, review the practice.

Of course, in order to save time, you can combine the practice with the relevant chapters of progress, quality, safety, contract, and cost control in construction management, which is the best.

After obtaining the certificate of passing the second-level constructor examination, you can apply for registration. After receiving the second-level constructor certificate, the initial registration must be within 3 years, and those who have not registered after the deadline must also submit a continuing education certificate when applying for registration.

How to register for the initial registration of the second-level constructor.

Preparation materials: 1. Initial registration application form for registered constructors, summary table (an additional one-inch color photo must be attached to the application form) and corresponding electronic documents (electronic documents are sent to the provincial registration authority through the Internet);

2. Copies of the applicant's qualification certificates, academic certificates and identity certificates;

3. A copy of the employment contract signed between the applicant and the employing unit;

4. A copy of the qualification certificate of the employing unit;

5. If you apply for initial registration and apply for multi-professional registration at the same time, you should also submit the original and copy of the certificate of passing the professional category examination of registered constructors;

6. If you apply for initial registration with the qualification certificate of the second-level registered constructor issued by other provinces (cities), you shall submit the certificate of non-registration issued by the provincial registration management department of the province.

Registration Process:

1. Go to the personal version of the "Secondary Constructor Registration Management System", click "Register" and enter the information, remember the password;

2. Log in to the system through the password and fill in the real personal information in the section that appears; It is best to fill in the information of two projects that you have participated in;

3. Submission; 4. Insert the enterprise password lock you are going to register to log in to the enterprise version of the "Secondary Constructor Registration Management System", click Agree and report;

5. Print the ** with barcode, seal and sign, and submit it to the competent department;

6. Submit paper materials in file bags to the competent department.

After the second-level constructor examination (qualified) 5-6 months to get the practice qualification certificate, after getting the certificate, you must find the registration unit, fill in the registration information online and submit the supporting materials above, and wait for about a month.

In general provinces, it takes 3-4 months to wait for the results to be announced after the examination, and 5-6 months after the examination (passing) to get the practicing qualification certificate.

It depends on the efficiency of each province.

The initial registrant of the second-level construction engineer qualification certificate can apply within 3 years from the date of issuance of the qualification certificate. Those who fail to apply within the time limit must meet the requirements of continuing education in this major before applying for initial registration.

To apply for an initial registration, you need to submit the following documents:

1) Application Form for Initial Registration of Registered Constructors;

2) Copies of qualification certificates, academic certificates and identity certificates;

3) A copy of the employment labor contract signed between the applicant and the employing unit or other valid supporting documents;

4) If the application for initial registration is overdue, the supporting materials for meeting the requirements for continuing education shall be provided.

The following conditions shall be met when applying for initial registration:

1) Obtain a qualification certificate after being assessed or passing the examination;

2) Employed by a relevant unit;

3) Meet the requirements for continuing education;

Where it is necessary to continue practicing at the expiration of the registration period, it shall apply for renewal of registration in accordance with the relevant provisions 30 days before the expiration of the registration period.

After passing the second-level constructor examination, the registration will be completed within one month.

Persons who have obtained the construction qualification certificate and meet the registration requirements must be registered before they can practice in the name of a builder. The Ministry of Construction or its authorized agency is the registration authority for the professional qualification of Class 1 constructors; The construction administrative departments of all provinces, autonomous regions and municipalities directly under the Central Government shall formulate the registration measures for the professional qualifications of secondary construction engineers within their respective administrative areas, and report to the Ministry of Construction or its authorized agencies for the record.

Applicants who are approved for registration will be awarded the "Registration Certificate of the People's Republic of China for Class 1 Constructors" and "Registration Certificate for Class 2 Constructors of the People's Republic of China" respectively.

The local people's construction department at or above the county level shall supervise and manage the registration and practice activities of registered constructors within their respective administrative areas; The relevant departments of transportation, water conservancy, communications and other relevant departments of the local people at or above the county level shall, within the scope of their respective duties, supervise and manage the practice activities of the relevant professional engineering registered constructors within their respective administrative areas.

Registered builders are required to undergo continuing education to refresh their knowledge and continuously improve their business. The validity period of the registration of the professional qualification of the constructor is generally 3 years, and the registration must be renewed 3 months before the expiration.