Correct cleaning methods and steps for membrane structure parking sheds

1.Wash regularly with a special cleaning agent.

In general, the membrane structure of the carport will be coated with film material for surface treatment, so some cleaning agents such as scrubbers, strong solvents, and hard brushes cannot be used for cleaning. Otherwise, not only will the cleaning effect not be achieved, but also the service life may be affected.

2.Selection of the number of cleanings.

Membrane carport cleaning is often combined with normal maintenance, as cleaning personnel carry out activities such as access settings. Therefore, under normal circumstances, it is necessary to carry out regular inspection of the membrane body to ensure the stability of the membrane structure, and routine inspection and maintenance can be carried out 1-2 times a month.

3.Remove stagnant water from the membrane surface.

Membrane structure parking sheds require attention to increase the frequency of cleaning and maintenance in some environments. For example, in the rainy season and winter, the membrane surface should be inspected and cleaned, the membrane drainage system should be kept unobstructed, and the stagnant water and snow should be removed, if the rain and snow continue to accumulate, the membrane body will be damaged.

Note: Do not use gasoline, alcohol, chlorine and other acidic or alkaline liquids to clean the membrane surface of the membrane structure parking shed, nor do you use clean water or neutral cleaning agents, acidic and alkaline substances can corrode the steel structure and membrane body.

Lanao membrane structure parking shed cleaning method and steps are detailed:

First of all, we use ordinary water guns to replace high-pressure water guns, high-pressure water guns are easy to destroy the shape of the membrane structure and the external protective film, so if possible, do not use high-pressure water guns, the cleaning of parking sheds is more difficult, because it is relatively high, so generally we will choose water guns to clean, first rinse the surface with water guns.

Then, climb up with scaffolding, after drying the laundry detergent on it, brush each one again with a long brush, and rinse it back and forth with a water gun. It should be noted here that for the first cleaning, put the washing liquid in the water gun bucket at 1:300, and brush it with a brush on the membrane structure with a water gun, as long as the mold mechanism becomes clean.

The washing solution uses alkaline washing liquid, which can cause damage to the exterior of the membrane structure parking shed.

Finally, the following steel frame pillar cleaning, the steel frame is all wiped back and forth with a clean rag, pay attention to clean the steel frame water quality clean, at this time, the membrane structure parking shed has a beautiful white skirt.

The installation method of membrane structure parking shed is as follows:

1. After the completion of the foundation engineering or the construction of the main structure, the installation of the membrane support structure shall be carried out, and the local paint repair and fire prevention treatment shall be completed.

2. Measure the geometry of the supporting structure and the connecting nodes and compare them with the design values, and make necessary corrections to the form-finding results; According to the corrected shape, the cutting design is carried out, and the film surface is processed and made; If the membrane surface has been fabricated before the completion of the supporting structure, the deviation should be corrected by other solutions, such as replacing the specifications of the connectors.

3. Fold and package the finished products of the processed membrane structure parking shed according to the requirements of the construction organization design, and mark them; Transport to the installation site.

4. Clean up the site and lay protective materials on the ground; Explain the process and division of labor to the workers; The membrane surface of the membrane structure parking shed shall be prepared for such work as punching holes on the membrane burning surface, threading steel cables, installing membrane corner gusset plates or membrane splints; A membrane surface that is tied with a rope net on the supporting structure for temporary support.

5. After the preparation is ready, the hoisting machinery is in place, and the hoisting and diagonal points are temporarily fixed.

6. Gradually balance the tension and apply pretension to the membrane surface of the membrane structure parking shed.

7. Carry out local tension adjustment on the corners and wrinkled areas, and finally fix the membrane surface and nodes; Completed the installation of the rainwater system and the anti-alleviation skin water covering.

8. Clean the inner and outer membrane surfaces.

Precautions for installation of membrane structure parking shed:

1. During the construction of the general parking shed, the warning signs of the construction should be done, and the construction site should be set up with obvious warning signs and guardrails in dangerous areas.

2. Electricity must be used during construction, so the power tool must use a leakage circuit breaker, and pay attention to the fact that each power tool must be a gate.

3. Every construction site must ensure that the road in the workplace is unblocked, and obvious signs must be set up in dangerous parts.

4. High-altitude work is essential, so the ladder used for climbing must be firm, and the height of the ladder and the ground is generally 60 degrees or 70 degrees.

The membrane structure of automobile parking shed is a variety of high-strength film materials and reinforcing components.

The structure of the shed film is composed of a variety of high-strength film materials and reinforcing components (steel frame, steel column or steel cable) through a certain way to produce a certain pre-tension stress inside to form a certain spatial shape, and the sail attendant as a covering structure, and can bear a certain external load of a spatial structure form. The biggest feature of the membrane is high strength, good durability, fire retardant, good self-cleaning, and is not affected by ultraviolet rays.

The membrane structure parking shed has light weight and good stress characteristics. Car carport film will become more and more important in future construction. The lightweight and chic shape of the membrane structure plays an important role in the construction of parking lots and waiting halls, in addition to meeting the basic functions such as weatherproof and sunproof, and has a good logo attraction effect, showing people's personalized side.

Notes on membrane leakage and remediated carport

1. The overall frame of the membrane structure parking shed is welded into the keel of square steel, the frame as a whole is treated with anti-rust, the anti-rust primer is brushed three times, and the surface is sprayed with white high-grade automobile paint, and the main column of the parking shed is generally made of 220mm steel pipe or I-beam as the support column of the parking shed, and the overall structure of the carport is firm, with high seismic and windproof coefficient and corrosion resistance.

2. The top sealing plate of the membrane structure parking shed is capped with brown (color can be selected) sunshine board, which is riveted with a pressure strip with the overall skeleton of the carport, which is resistant to acid and alkali corrosion, and has sufficient strength to protect the vehicles in the shed.

3. The membrane structure parking shed is welded with 38 galvanized round pipes and the carport frame to strengthen the strength of the top of the shed, which can make the shed feel spacious and bright, and it is easy and convenient for the parking car to return to the car, which fully meets the requirements and specifications of the parking shed.

4. The foot of the column of the membrane structure parking shed is firmly welded with the embedded parts with 10mm thick steel plates, and the embedded parts are poured with concrete when the parking shed is installed, and the bolts are connected with the vertical parts, which has a high wind resistance coefficient, increases the overall firmness of the carport, and can resist the attack of typhoons above 12 levels.

The above content refers to Encyclopedia - membrane structure carport.

Nowadays, many people's homes or the location of some residential communities will establish a rain shelter forest, but also because it can be convenient for residential community staff to park, the relevant rain shelter materials are divided into a variety of materials, for the membrane structure carport in the current life is also more popular, but in the case of selection to carry out construction, it is necessary to pay attention to the construction methods and steps, then, what to pay attention to in the construction of membrane structure parking shed? How to construct a membrane structure parking shed? We've got you covered.

The membrane structure building has good light transmittance, which can ensure the color of the internal structure, and can also reflect the sunlight on the surface, so that there can be no shadow area generated by too strong sunlight, which can block a certain amount of sunlight heat. At the time of application, it is necessary to pay attention to the following aspects:

1. Prepare the raw materials, and select the appropriate membrane structure project before the construction of this or section to ensure the ductility of the membrane, so that the membrane can show a better practical effect. Simplifying the raw materials and construction room of its support frame, in the construction project can be selected to straighten first, and finally the overall membrane structure engineering.

2. Through continuous repeated scrutiny, the construction staff carefully and accurately measured the construction site, and indicated the specific relative height, supporting parts, and levels according to the design drawings. In the case of specific construction, the monitor should be carried out in the whole process to reduce the error and let the membrane structure carport show a beautiful side.

3. The drilling of the support frame is particularly critical, without a good wall foot, it is unlikely that there will be a good engineering building, so it is necessary to strictly manage the opening position, and each pile needs to be carefully and accurately measured, and less deviation makes it within the scope of adjustment.

4. After the hole is drilled, it is necessary to lay the pile foundation, only the pile foundation is installed, and the support and membrane can be assembled with simplicity. Welding can only be carried out if there is a clear deviation in the accurate measurement.

How to construct a membrane structure parking shed?

1, the membrane structure parking shed engineering construction used in the material compressive strength is very good, high-quality characteristics lead to it in the city by a lot of customers acceptance, the construction staff use the steel cable will be stretched and tightened, you can have a faster visual impact. This is necessary for specialized construction workers to design and assemble the scheme.

2. In the case of construction, the construction method of the membrane structure carport must be appropriate, and the actual operation must be completed in accordance with the process.

What should be paid attention to in the construction of related membrane structure parking sheds and how to construct membrane structure parking sheds? In the process of carrying out construction, we must pay attention to the selection of information, and find a professional construction elite team and staff to carry out the construction, and we should be more serious about the quality of the establishment in the key points will be better, and it will be more convenient to apply in the later stages, and it can also prevent some unexpected situations.

Membrane structure carport refers to the carport made of membrane structure material as the roof material, which is made of a variety of high-strength film materials and reinforcing components (steel frame, steel column or steel cable) through a certain way to produce a certain pretension stress inside to form a certain spatial shape.

As a covering structure, it can bear a certain external load. The biggest feature of the membrane is high strength, good durability, fire retardant, good self-cleaning, not affected by ultraviolet rays, and long service life, generally 15-30 years.

Arched membrane carport, this style of carport is similar to a bridge, so that there is no parking problem for more skilled people, and there are columns on both sides to better protect the vehicle from accidental collisions.

Umbrella membrane structure carport is a kind of umbrella-shaped carport built by tensioning technology, this kind of carport can be supported by two columns, or both can be placed on one side, and the roof can be built by cantilever.

1. The surface of the membrane material used in the membrane structure carport is PVDF membrane cloth, which has a certain stress under the tensile force of the steel cable, so we must pay attention to prevent the phenomenon of wear and scratch;

2. The application of membrane materials should be in a dry and clean place, and avoid putting them together with organic chemicals;

3. If the membrane material is polluted to a certain extent, pay attention to avoid using detergents when cleaning, choose a specific cleaner, and then blow dry it with an air gun, and pay attention not to use strong acid and alkali to clean it to avoid deformation;

4. There is dust on the membrane structure carport that needs to be cleaned, dish soap should be taken, then rinsed with clean water, and finally dried with a cloth;

5. If there are bird droppings and other organic matter on the membrane structure carport, it can be directly rinsed with clean water, and the membrane structure carport should be maintained frequently, which is durable and beautiful.

1. Do not set up lights and heating equipment too close to the membrane, so as not to burn the membrane, and it is best to ensure that the temperature environment of the membrane structure carport is -40 +70;

2. Do not contact the surface of the membrane material of the membrane structure carport with knives and sharps, so as not to scratch and abrasion the surface of the membrane;

3. The surface of the steel components of the membrane structure carport should not be hit and scratched by hard objects, and should not be exposed to various acidic, alkaline and organic solvents;

4. When the membrane surface of the membrane structure carport needs to be cleaned and cleaned, workers should not wear hard-soled shoes to directly contact the surface, and should wear soft-soled shoe membrane without nails to avoid metal objects and other sharp and hard objects scratching or scraping the membrane surface of the membrane structure carport.

5. Do not use acidic or alkaline materials such as gasoline, alcohol, chlorine and other liquid agents to clean the membrane surface of the membrane structure carport, and apply water or neutral cleaning agent.

6. Do not stack foreign objects such as iron parts, chemicals or other colored materials on the membrane surface of the membrane structure carport for a long time.

7. Do not arbitrarily adjust and disassemble the steel structure, steel cable, splint and bolts and other components in the membrane structure carport without the approval of the manufacturer.

8. Do not pull or hang heavy objects and items on the membrane material of the membrane structure carport.

9. Avoid a large amount of water accumulation on the surface of the membrane, and drain the water in time, if not treated in time, it will cause damage to the membrane structure carport.

It is also very important what brand you make, and it is easy to maintain a good brand.

One: Avoid collisions.

After the completion of the membrane structure carport project, it should be noted that in the process of parking the vehicle, it is necessary to be careful to reverse and not touch the steel structure of the membrane structure carport. Also avoid hard objects rubbing against the roof of the carport.

2. Keep away from acids and alkaline substances.

Acid and alkaline substances are the killer of membrane structure carport, and acid and alkaline substances have a corrosive effect on steel structures and membrane materials. If the steel structure is accidentally stained with acid (such as sulfuric acid, vinegar) and alkali (such as methyl alkali, soapy water, soda), the stain should be immediately rinsed with clean water, and then dried with a dry cotton cloth. Avoid acid and alkali corrosion of steel materials.

Three: Eliminate rust.

If the steel structure is rusty, if the rust has expanded a large area, the relevant technicians should be asked to repair. Sanding, sandblasting, shabu-shabu.