-
Several situations and solutions for the black screen of the Apple mobile phone and the solutions:
One situation where the iPhone itself is unstable, resulting in a black screen. This kind of black screen can be attributed to an unstable automatic shutdown, which is because the machine is of poor quality, resulting in shutdown for no reason. Because there is no big problem with the hardware, you can just press and hold the power button and wait for it to turn on.
The second scenario. DFU mode is the mode in which the Apple system cannot be turned on if there is a problem, while entering the recovery mode can be recovered with iTunes. But the phone is fine, and it can't be turned on because it can't be turned on because it has entered DFU mode by mistake, but it's actually very easy to solve.
You only need to press and hold the power button and the home button at the same time and wait for the iPhone to react, generally for more than 10 seconds, if there is no response for tens of seconds, the following steps continue.
In the third case, you need to enter DFU mode, first of all, iTunes must be installed on the computer, and you can ** a new iOS system. Or restore files with a backup beforehand. Of course, during the recovery process, the computer can be connected to the Internet, and it can also be ****, but the wait is longer.
-
Reasons and solutions for iPhone XR sudden black screen:
1. In addition to hardware failures, in general, the cause of the sudden black screen of the iPhone is caused by the firmware system itself, or some third-party applications that are incompatible with the system.
2. Try to press and hold the "Power Button" on the top of your phone first.
3. If pressing and holding the power button does not make the phone turn off or restart, please try to press and hold the "Power Button" and "Home Button" together for 10 seconds.
4. If the above two methods still work, please connect the mobile phone to the power supply. Then press and hold the "Power Button" and "Home Button" together for 10 seconds.
5. Finally, if it doesn't work, it may be a hardware failure, please go to Apple's local after-sales service for hardware fault detection.
iPhone XR is a smartphone device owned by Apple (Apple) in the United States, the body is equipped with a 7nm process A12 Bionic chip, using a TrueDepth camera, and supporting the Face ID function. In the early morning of September 13, 2018, the iPhone XR was officially released at the 2018 Apple Autumn New Product Launch Conference, with a starting price of $749. Pre-orders will start on October 19 and will be officially released on October 26.
The fuselage is made of aviation aluminum, with a total of six colors: white, black, blue, yellow, coral, and red, and a metal middle frame, which is somewhat similar to the previous iPhone 5C. Support IP67 waterproof. With LCD screen, inch Liquid Retina, resolution of 1792x828 pixels, with a refresh rate of 120Hz, no 3D Touch function.
-
Summary. Hello, glad to reply to you, the reasons and solutions for Apple XR system updates often go black: system problems, software conflicts.
If the screen is damaged, it will turn into a black screen, 1. Press and hold the power button and the lower volume button at the same time to try to turn on and off again. 2. Connect the charger to see if there is a charging display, if there is a charging prompt, you can charge it for a while and then turn it back on. 3. If you can operate the phone after restarting or charging, uninstall the third-party plug-in program that was operated before the black screen.
4. Back up your phone data (**book, short message, multi** file, etc.), and restore factory settings. If the problem persists and cannot be solved by yourself, it is recommended to bring your mobile phone to a regular Apple customer service center for inspection and repair. I hope it will be helpful to you, and you can always find the teacher if you have any other questions in the future.
I wish you all the best in your life.
I got a black screen after I updated it.
Hello, glad to reply to you, the reasons and solutions for Apple XR system updates often go black: system problems, software conflicts. If the screen is damaged, it will turn into a black screen, 1. Press and hold the power button and the lower volume button at the same time to try to turn on and off again.
2. Connect the charger to see if there is a charging display, if there is a charging prompt, you can charge it for a while and then turn it back on. 3. If you can operate the phone after restarting Shoufan or charging, uninstall the third-party plug-in program that operated before the black screen. 4. Back up mobile phone data (**book, short message, multi** file, etc.), and restore the factory to set up Lu Yunzhi.
If the problem persists and cannot be solved by yourself, it is recommended to bring your mobile phone to a regular Apple customer service center for inspection and repair. I hope it will be helpful to you, and you can always find the teacher if you have any other questions in the future. I wish you all the best in your life.
The screen is black, everything is good, but it doesn't light up.
iOS16 system, any problems, it is normal. This system is not perfect.
What model are you.
-
Solution: Apple XR Suddenly Black Screen:
1. First of all, eliminate whether the black screen is caused by no power, link the charging device to charge, replace the charging cable and charger, and eliminate whether the charging equipment is faulty and cannot be charged, resulting in a black screen of the mobile phone without power.
2. Force restart the phone, the correct restart of XR is: press the volume +, then press the volume down, and then press and hold the power button until the Apple icon appears.
3. If the above methods cannot be solved, it is generally a chip and line problem of the screen or motherboard, and the screen fault is divided into cable or display component failure, and the cable and display component need to be repaired, and the screen can only be replaced if it is serious.
4. If it is a motherboard problem, usually the whole motherboard will not fail, but it is a short circuit of a chip or board circuit on the board surface, which can be repaired by chip transplantation, repair welding and board flying wires.
5. The motherboard chips that generally cause a black screen are: CPU, hard disk, power supply, baseband and small inductors around them.
If that doesn't solve your problem, take your phone to a nearby Apple repair center for testing. Professional personnel will help you solve the problem, if your phone is still under warranty, please be sure to go to Apple's official repair point, because once the phone is disassembled at a third-party repair point, Apple will officially refuse to repair.
Reasons why the right mouse button frequently jumps out:
1. Short circuit caused by water ingress of the mouse; >>>More
There are many reasons for this phenomenon.,It may be that some of your host is not plugged in.。。。 You can try to put on anti-static gloves and reinsert all your parts... Let's see if this happens... >>>More
First, they have a relatively high level of education, and their cultural tradition is to take literature as the first priority, and many people have this kind of thinking.
First, let's take a look at the situation where the legend pops up. >>>More
Analysis and answer to the problem of automatic shutdown of the computer: >>>More