Where is the frame number of the Toyota Senna Rush 5

The frame number is usually located in the engine compartment. You can also find the VIN of the vehicle on the insurance policy, motor vehicle license, etc.

The frame number is the vehicle identification number, which can also be abbreviated as vin, which is similar to the ID number, which is the designated code number given to a car by the automobile manufacturer for identification. Because the frame number is arranged and combined, it is composed of 17 letters and numbers, which can make the same model of the car within 30 years without a heavy number, and through the 17-digit code, you can understand the production country, age, model, engine model, etc. of the car, so the frame number is also a car ID card.

Lower left corner under the front windshield. There is a place where the frame number is printed on it. The nameplate can also be seen when the front hood is opened. It also has a frame number on it.

The frame number of the Toyota Senna is on the girder under the passenger chassis If you want to print the frame number for annual review, the specific operation is as follows; After lifting the vehicle, there is a rectangular plastic cover under the co-pilot chassis After removing the plastic cover, you can see the frame number, what cabin, under the co-pilot's seat, and the lower left corner of the windshield are all incorrect. My Senna was factory in 2014 and licensed in 2016.

The frame number of the Toyota Senna is in that position on the body, and the number that can be extended is recessed.

The frame number of the American version of the Senna lies down at the right front door, towards the bottom of the car.

Find it on the body shelf. Generally, the new car ** license plate, car review and photo are all in this position.

The 2016 model year of Toyota Senna imported from the United States, the frame number is next to the passenger door, and there is a black rubber film pasted! Tear.

The passenger side of the door was there, and just found it, it was covered by a black rubber block.

The black tape on the right front sill can be seen by tearing off, and the tape is self-adhesive and reusable.

The chassis under the passenger cab can be seen by disassembling the rectangular plastic plate, and it can be rubbed.

I don't know if it's a blind BB, the 4 of us just found it after looking for an hour, on the chassis behind the spare tire.

The frame number of Tian Feng Senna is in. The bonnet is open and takes a look.

The black adhesive strip of the co-pilot's door frame was torn open and I saw it.

Lower left corner under the front windshield. There is a place where the frame number is printed on it. The nameplate can also be seen when the front hood is opened. It also has a frame number on it. The frame number of the American version of the Senna lies down at the right front door, towards the bottom of the car.

Find it on the body shelf. Generally, the new car ** license plate, car review and photo are all in this position.

Put the car up, and on the side of the right front seat, there is a plastic guard plate that is removed, and you can see it.

The frame number of the 2016 American version of the Senna lies down at the right front door, on the side of the underbody.

Under the passenger door, the sticker on the welcome pedal was privately seen.

The Toyota Senna frame number is in the engine compartment, located on the body of the rear of the engine, is a string of 17-digit numbers mixed with English letters, engraved on the body by means of steel seals, and the specific operation steps are found as follows:

1. Open the door on this side of the cab of the Toyota Senna.

2. Pull the hood switch on the left side of the Toyota Senna driver's leg.

3. Lift the hood of the engine of the Toyota Senna upwards.

Fourth, use the support rod to support the hood of the Toyota Senna to ensure that the support is firm to avoid danger.

5. The frame number is located in the figure.

The Toyota Senna frame number is located under the hood, on the nameplate in the upper left corner of the engine, and the specific operation steps to find the nameplate are as follows:

1. Open the driver's door of the Toyota Senna.

2. Pull the hood switch on the left side of the driver's leg of the Toyota Senna.

3. Lift the engine hood of the Toyota Senna upwards.

4. Use the support rod to support the engine hood of the Toyota Senna, and ensure that the support is firm to avoid danger during operation.

5. The frame number of the Toyota Senna is located under the hood and on the nameplate in the upper left corner of the engine.

The Toyota Senna frame number is located on the nameplate of the car, which is on the front passenger door frame of the car, and it can be seen when the passenger door is openedThe specific steps are as follows:

1. Open the door on this side of the cab.

2. Pull up the hand brake of the car.

3. Open the passenger door.

Fourth, there is this nameplate on the door frame.

Fifth, as shown in the figure below.

Precautions for operation:

1. Do not affect traffic when opening the door.

2. Do not damage the nameplate of this door.

On the frame of the passenger seat body.

The new car will be pasted under the passenger seat with an anti-hatred strip, and you will see it when you tear it off

Summary. In the lower left corner of the front windshield, there is a place where the frame number is printed. You can also see the nameplate of the car when the front hood is opened, and there is also a frame number on it. In addition, Senna's frame number is under the passenger door, and the sticker on the welcome pedal can also be seen torn off.

In the lower left corner of the front windshield, there is a ground stupid square with the frame number printed on it. You can also see the car name neutral position plate after the front hood is opened, and there is also a frame number on it. The frame number of the Senna is under the passenger door, and the sticker of the welcome pedal can be seen torn off.

No, I don't. Senna for 12 years.

Welcome pedal, you're looking.

No. Look at it.

Yes, this is it.

I have the stamps of the original car.

Some cars don't have them.

This car is imported.

The frame number of the 18 GAC Toyota Senna is located under the hood, on the auspicious belt nameplate in the upper left corner of the engine, and the specific operation steps to find this nameplate are as follows:

1. Open the driver's door of the 18 GAC Toyota Senna.

2. Pull the hood switch on the left side of the driver's leg of the 18 GAC Toyota Senna.

3. Lift the hood of the engine of the 18 GAC Toyota Senna upwards.

4. Use the support rod to support the engine of the 18 GAC Toyota Senna, and ensure that the support is firm to avoid danger during operation.

The frame number of the GAC Toyota Senna is located under the hood, and the nameplate in the upper left corner of the engine is on it.

The Senna frame number of the American specification itself is not there, and it is required to smash the frame number when the customs declaration is declared. The default position is on the girder under the co-pilot's middle column, not in the car's exterior girder!