-
Anonymous users2024-02-06First, enter the pure DOS state ......You first have to install the virtual floppy drive or dwarf DOS toolbox in your system, or you can take a Windows 98 installation CD, choose to boot from the CD, and you can enter the pure DOS. (You're now .......))
Second, after entering DOS, if your files are placed in the ghost folder of your f drive, and your disk is in fat format, just type "f:" and press enter. Then type "cd ghost" and press enter.
Then type", and you can open the ghost program. Here you have to pay attention: if your C drive is in NTFS format, you have to type "E:, enter, instead of "f:", enter, understand? If there are a few drive letters in NTFS format before the F drive (the hard drive you're on), subtract a few.
In other words, if your CDE disks are in NTFS format, you need to type "C:" and press Enter. Then type "cd ghost" and press enter.
Then type", and you can open the ghost program. (This means you need to know where your program is placed......）
Do you understand? For the ghost operation later, I won't say much here, I hope it can help you ......Hehe, let's talk about it if you have a problem......In the future, it is recommended that you figure out the use of ghost before proceeding, and try to be careful ...... the first use!
Because the ghost instructions behind it are generally intuitive, if you make a mistake, the loss can be ......So, I won't talk about it here, and I can't say ...... clearly
If you really can't find the relevant **, you can add my QQ, I will pass it to you or ** if I am free, 116961575, please indicate the reason ......But to set me as the answer, ah......It's hard work, and it's good to give some hard money......Hehe, that's all for it......
-
Anonymous users2024-02-05Problem 1: As long as the GHO file of your ghost disk system is intact, you can use ghost to restore it directly to the C drive, and the system will not have problems.
ISO system file,**After that, unzip it under the "root directory",Click on the file that is automatically installed,Select the location where the ghost file is located,OK to install,All are fully automatic。
-
Anonymous users2024-02-04Alas. Actually, you don't have to be so troublesome.
-
Anonymous users2024-02-03There is no need to enter the DOS format C disk and then enter the ghost recovery.
Just go directly to Ghost and then overwrite the C drive.
You have to give a specific post-entry content in order to give you a clear answer.
Otherwise, it's hard to judge.
It's possible that someone else has installed a piece of software for you.
It's also possible that he just wants to play a prank on you.
Got a useless option.
This fix is also available online.
But you have to be sure of that kind of situation beforehand ...
-
Anonymous users2024-02-02The ghost version of the system is packaged and produced by the official system, due to the integration of a large number of hardware drivers, it is deeply loved by the majority of users, because the ghost version of the system will automatically match and install the corresponding hardware driver after installation, recently some users do not know how to install the ghost version of the system, the ghost version of the system installation methods mainly include hard disk decompression installation and U disk installation, if you still don't understand how to install the ghost version of the system, you can learn this tutorial.
Installation Notes:
1. If the current system can be used normally, directly decompress and install, if the system has been damaged, you need to install it with a U disk.
2. Under normal circumstances, a 32-bit system is installed with less than 2G memory, and a 64-bit system is installed with more than 4G memory.
3. If the high guess prompts that the installer cannot be run, it means that the installation tool is only suitable for 32-bit or 64-bit systems, at this time you can extract the gho file, and then** support both 32-bit and 64-bit one-click ghost installation, how to install win7 with one-click ghost
How to install ghostwin7 with Chinese cabbage U disk mega belt
When installing the system, it prompts you that you have not specified the ghost32 ghost64 location.
1. Preparation for installation
1. Back up important files on the C drive and desktop.
3. Decompression software: winrar or good pressure and other decompression tools.
2. Ghost version system installation tutorial hard disk decompression method
3. Double-click [Install System.] exe], open the installation tool OneKeyGhost, select "Restore Partition", load the image path, select the installation location such as C drive, click OK, if the prompt does not specify ghost32 64, then refer to the method of the above related tutorials to solve;
4. A prompt box pops up, the program is ready, and directly click Yes to restart immediately for computer restoration;
5. After restarting the computer, enter this interface and perform the process of formatting the C drive and restoring the GHOST version of the system to the C drive, which takes about 5 minutes;
6. After the above process is over, the computer will automatically restart, start into this interface, and start the process of installing the ghost version of the system and configuring the system;
7. The installation process takes about 5-10 minutes, and finally boots into the new system desktop, and the installation process of the ghost version of the system is completed.
The installation steps of the ghost version of the system are introduced to you here,The installation process is very simple,Friends who don't know how to install the ghost version of the system,You can learn this method。
-
Anonymous users2024-02-01Just click on the installation.
You don't need to move anything.
It's all automatic.
If you can boot it on a disc.
Start the installation with a disc.
If you don't, just put the disc on your computer.
Then install it inside the system.
The operation interface is all in Chinese.
I don't need to say more.
-
Anonymous users2024-01-31It's very simple, open the ghost software:
Restore the system: operation steps: one, two, three (operation sequence).
Backup system: Operation steps: 1 > 2 > 2 (operation sequence).
The gho file is the file used for the installation of the system It is an image file made with ghost The working principle of the U disk reply is actually to map the U disk into a hard disk in the BIOS and then use the ghost software to mirror the system disk It's just that we didn't have a U disk to start at that time, so you have to manually enter this software to operate, and the U disk **** has become popular rapidly Replaced the disc In fact, as long as you know how to use the ghost software, you guys are so foolish to install the reply It's just that I used the ghost command and added some parameters to write it as a batch file of bat, so you want to know that this gho file is placed in** Just find the bat file and look at the parameters of ghost to understand If you don't understand, you can directly ghost There is a detailed description of this software and parameters inside.
CD-Key is equivalent to the serial number, that is, the SN of the common series is the verification code that comes with every Windows series product produced by Microsoft. But it has lost its meaning, in the era of the rampant D version, Windows 98 was infinitely copied, and CD-Key can be universal, and you can find a lot of them on the Internet. The installation process must provide a cd-key to proceed. >>>More
Return the money, brother, I express deep sympathy for your experience, after returning the money, change telecommunications or Tietong, Tietong is more real, telecommunications is also very ghostly, you need to have more eyes with telecommunications. >>>More
No, after formatting the partition, the 80G hard disk must have about 76G multiplied by two, and it must have 152G. >>>More
Text: micorsoft word recommends version 2000 (relatively stable (more complete functions, security patches can also ensure security and stability) WPS word processing. >>>More