How much does the company that does the construction of the purification workshop generally offer?

The manual ** is not dead, there may be a unified project **, and some companies are divided into batches**, how much is each project, this kind of division is relatively fine, in fact, it is almost the same. Some people may ask, why the same project, the labor difference is large, the following Anhui Shuangjia purification will tell you about the problem. Some engineers have deep qualifications, fine workmanship, and high fees, depending on what to do and how much to do.

For example, in the process of clean workshop decoration, some masters only make doors, and some masters do door and partition installation, or ceiling partition or equipment installation, etc.

Some requirements are strict and require qualification certificates, if you need to hang the qualifications of other companies, I heard that there are only 4 in Wujiang for the 2nd level qualification of purification engineering, which is very difficult to do!

Recognized qualifications issued by the state: mechanical and electrical installation or decoration, etc.

. The Ministry of Construction has never issued a purification qualification, and if anyone says they have it, it is fake. (In order to improve the market competitiveness of local purification enterprises, Jiangsu and other local ** and industry associations have rated themselves as purification engineering qualifications.)

It is parallel import) The only qualifications recognized by the state are mechanical and electrical installation or decoration.

Unless it is a pharmaceutical company, others do not need qualifications.

Summary. Hello, how much is a square meter of pro-purification workshop decoration 100,000-level 100,000-level dust-free workshop decoration Generally speaking, we give customers the best for 300,000 and 100,000 yuan for 100,000 purification workshops; The 10,000-level clean workshop is 1000 2000 yuan, compared with other clean workshop decoration companies, we also have our own clean room inspector who can issue a dust-free workshop test report (that is, cleanliness test report), and the cost is 50 yuan

How much is a square meter of 100,000-level purification workshop?

Hello, how much is a square meter of pro-purification workshop decoration 100,000-level 100,000-level dust-free workshop decoration Generally speaking, we give customers the best for 300,000 and 100,000 yuan for 100,000 purification workshops; The 10,000-level clean workshop is 1000 2000 yuan, compared with other clean workshop decoration companies, we also have our own clean room inspector who can issue a dust-free workshop test report (that is, cleanliness test report), and the cost is 50 yuan

What is the difference between the 100,000 level and the 10,000 level of the teacher.

There are several main aspects of the difference between the 10,000-level and the 100,000-level dust-free workshop: (1) Space: the level of clean room requirements is the main factor that determines the layout of the area.

2) The temperature and humidity required by different levels of dust-free workshop are different, cleanliness is the key to choosing the number of air exchanges, the higher the cleanliness, the greater the number of air changes, the greater the air volume and cooling capacity required by the dust-free purification workshop, the higher the amount of air and water pipes and high-efficiency tuyeres at the end, the higher the temperature and humidity control requirements, the more complete the supporting equipment required, and the higher the cost. (3) The level requirements of the dust-free workshop are different, the illumination is different, and the number of lamps and lanterns required is different. The difference between 10,000 and 100,000 is not only the above aspects, but also the difference in the level makes the cost different, the higher the level, the higher the cost.

Dongxin purification has 16 years of design and construction experience, the design principle of "let the project run with low consumption", preferential and sincere service, so as to "make your project run with low consumption".

What I'm asking is what the difference is.

Inquire about how much you can quote for 100,000 levels.

The difference between the 10,000-level and 100,000-level dust-free workshops is the difference in cleanliness and cleanliness when choosing correctly. 100,000 level means that there are no more than 100,000 particles larger than microns per cubic meter; The maximum allowable particle concentration of microns in the 10,000-level dust-free workshop is less than 352000 (pc m3), and the maximum capacity of 5 microns. The degree of harm is different.

The higher the number of dust from the level, the cleaner the environment, and the hazard degree of 10,000 is lower than the cleanliness of 100,000 level. The fresh air volume is different. The diffusion effect of small particle size dust is obvious, and the air flow with low wind speed stays in the filter material for a longer time, and the dust has more opportunities to hit obstacles, so the filtration efficiency is high;

How much price to quote and how much profit to be quoted at the 10,000 level.

2000 yuan

Is it 2,000 yuan per square meter at the level of 100,000 yuan?

Yes, each has its own **.

Is it 3,000 yuan per square meter at the level of 10,000.

Yes, pro 3,000 yuan per square meter.

As of January 2020, the cost of the purification workshop ranged from a few hundred yuan to several thousand yuan per square meter.

Cleanliness level of purification workshop: 100 level, 1000 level, 100,000 level, 100,000 level, 300,000 level, that is to say, the smaller the value, the higher the purification level. The higher the cleanliness, the higher the cost.

The cleanliness of the 100,000-level purification workshop is not too high, and the well-known purification workshop engineering company iwuchen usually does more 100,000-level purification workshops, including general electronics, food and beverage, medical equipment, cosmetics factories, etc.

The cost of the purification workshop ranges from a few hundred yuan to several thousand yuan per square meter.

This depends on the specific situation, different cleanliness levels are different, and the common cleanliness levels are hundred, thousand, ten thousand, and one hundred thousand. The smaller the value, the higher the cleanliness level, the higher the construction difficulty and the corresponding equipment requirements, and therefore the higher the cost.

The cost of the purification workshop is expensive, so many customers will understand it before the construction of the project, so as to do a good job in the budget of the funds, so what are the decisive factors affecting the cost of the 100,000-level purification workshop?

1. The size of the workshop The size of the 100,000-level purification workshop project is the main factor that determines the cost, and the cost of the workshop construction is large, and the cost is relatively low if the square is small.

2. The materials and equipment used When the size of the workshop is determined, the materials and equipment used are also related, because different brands and different manufacturers produce different materials and equipment, which in general has a great impact on the total.

3. Different industries will also affect the purification workshop, such as food, cosmetics, electronic products, drugs, etc., which are different for different products, such as most cosmetics do not have makeup systems. Through the above content, we can know how much the cost per square meter of the 100,000-level purification workshop is, in fact, there is no accurate number, but it is affected by many factors, so you can make a specific understanding according to your specific needs.

How much is a flat in the 100-level, thousand-level, and 10,000-level semiconductor dust-free workshops.

Labor alone is generally 18--30 doors and windows, and the addition of a door and window is generally 80-100 yuan.

The purification workshop material is the purification plant wall, the roof plate is generally made of 50 mm thick sandwich color steel plate, which is characterized by beautiful appearance, strong rigidity, good thermal insulation performance and easy construction. Arc corners, doors, window frames, etc. are generally made of special alumina profiles, and the floor can be made of epoxy artesian flooring or high-grade wear-resistant plastic flooring. The return air duct is made of hot zinc plate, pasted with flame retardant PF foam plastic sheet with good purification and thermal insulation effect, and the stainless steel frame is used for the high-efficiency air supply outlet, which is beautiful and clean, and the perforated mesh plate is made of baked aluminum plate.

Summary. Hello! We're glad to answer your questions!

Hello, the 100,000-level purification workshop is about 1,000 yuan per square meter! The purification workshop material is the purification of the plant wall, the roof plate is generally made of 50mm thick sandwich color steel plate, which is characterized by beauty, strong rigidity, good thermal insulation performance, and easy construction. Arc corners, doors, window frames, etc. are generally made of special alumina profiles, and the floor can be made of epoxy artesian flooring or high-grade wear-resistant plastic flooring, which has anti-static requirements.

How much is a square meter of 100,000-level purification workshop?

Hello! We're glad to answer your questions! Hello, the 100,000-level purification workshop is about 1,000 yuan per square meter!

The purification workshop material is the purification of the plant wall, the roof plate is generally made of 50mm thick sandwich color steel plate, which is characterized by beauty, strong rigidity, good thermal insulation performance, and easy construction. Arc corners, doors, window frames, etc. are generally made of special alumina profiles, and the floor can be made of epoxy artesian flooring or high-grade wear-resistant plastic flooring, which has anti-static requirements.

1.The walls and roofs of purified workshops are generally made of 50mm thick sandwich color steel plates, which are characterized by beautiful appearance, strong rigidity, good thermal insulation performance and easy construction. Arc wall corners, doors, window frames, etc. are generally made of special alumina profiles2

The floor can be made of epoxy artesian floor or high-grade wear-resistant plastic flooring, and if there is an anti-static requirement, the anti-static type can be selected. 3.The return air duct is made of hot zinc plate, and the flame retardant PF foam plastic board with good purification and thermal insulation effect is pasted.

4.The high-efficiency air supply outlet is made of stainless steel frame, which is beautiful and clean, and the perforated mesh plate is made of painted aluminum plate.

What about the fresh air system and exhaust air system?

It's all included!