LED Lighting CE Certification Standards, LED Lighting CE Certification Process?

It's best to find a ** company and help you get everything done.

What are the steps and processes for lighting products to do EU CE certificate? You can contact our company for more information. Lamps and lanterns have an irreplaceable role in our lives, but generally our common lamps and lanterns must be put on the market must go through the corresponding testing and certification, especially in China, as a major producer of lamps and lanterns, if you want to enter the European market, you must apply for the EU CE certification.

The necessity of CE test certificate for luminaire products.

CE certification provides a unified technical specification for products from all over the world to be carried out in the European market, simplifying the first procedure. Products from any country must be CE certified to enter the European Union and the European Free Zone, and the CE mark must be affixed to the product. Therefore, CE certification is a passport for products to enter the market of the European Union and the European Union ** Free Zone.

CE certification indicates that the product has met the safety requirements set out in the EU directives; It is a kind of commitment of the enterprise to the consumer, which increases the trust of the consumer in the product; Products bearing the CE mark will reduce the risk of being sold on the European market.

Luminaires exported to EU countries must be CE certified, which requires products to pass the requirements of LVD and EMC directives. The LVD Directive for CE certification of lighting products is 2006 95 EEC, and the EMC Directive is 2004 108 EC.

LED lamps and lanterns CE certification testing specific items:

1.The main testing points of LED lamps and lanterns are the following five aspects: EMC-EN55015, EMC-EN61547, LVD-EN60598, if it is LVD with rectifier, EN61347, EN61000-3-2 -3 (test harmonics).

2.CE is composed of EMC (Electromagnetic Compatibility) + LVD (Low Voltage Directive). EMC also includes EMI (interference) + EMC (anti-interference), LVD is generally speaking, safety is full, general low-voltage products AC less than 50V, DC less than 75V can not do LVD projects.

Low-voltage products only need to test EMC, CE-EMC certificate, high-voltage products need to test Tanwang orange EMC and LVD, and issue two certificates and reports CE-EMC CE-LVD.

3.EMC (battery compatible) - EMC test standards (EN55015, EN61547), the test items include the following aspects: radiation conduction, Lingyou, electrostatic conduction, anti-interference, radiation anti-interference, interference 6EFT pulses.

4.LVD (Low Voltage Directive) - LVD test standard (EN60598), the test items include the following aspects:1

Failure (test) 2Impact 3Shock 4

Impact 5Clearance 6Creepage distance 7

Electric Shock 8Fever 9Overload 10

Temperature rise test. The process of CE certification testing of lamps and lanterns:

1.Submit the application form.

2.Provide lamp test samples and materials to the laboratory.

3.Laboratory test lamps CE certified samples.

4.Conduct sample testing and technical documentation review;

5.The agency issues a CE certificate;

LED lighting fixtures switching power supply is divided into constant voltage and constant current mode: LED is a current type device, ideal for constant current power supply, but most of the market is full of constant voltage source power supply, which will greatly shorten the service life of LED. For the detection of LED switching power supply, the following points are made:

1.Output voltage ripple detection; 2.Switching power supply efficiency detection; 3.

If there is a requirement for power factor, the power factor should also be detected; 4.Input voltage regulation detection to prevent the impact of sudden changes in the input power supply on the circuit; 5.and full-load power supply temperature detection, (the biggest feature of LED lamps is high heat generation); 6.

If it is a switching power supply with constant current supply, the output voltage ripple.

Swap to pair output current accuracy detection. These items are required, and some others depend on the company's requirements!

The inspection of the luminaire is as follows:

Do CE certification, divided into EMC and LVD two parts.

The standards used for EMC testing are: EN55015, EN61547, EN61000-3-3, this standard is for conducted emissions and power emissions testing. en61547

This standard is for static electricity, radiation immunity, fast pulsation, surge or lightning strike, conduction immunity, voltage surge and dip and other aspects of the EN61000-3-3

It is to measure voltage fluctuations. EN61000-3-2 is to do harmonic testing.

The standard used for LVD testing is: EN60598. It includes insulation withstand voltage test, leakage current test, ground resistance test, insulation resistance test, temperature rise test, abnormal temperature test and so on.

RoHS certification is an environmental certification of the European Union. It is mainly used to detect whether the lead, cadmium, mercury, hexavalent chromium, polybrominated biphenyls and polybrominated diphenyl ethers in it exceed the standard.

FCC certification is mandatory in the United States.

The standards used to do FCC certification are:

Part18, mainly do EMC testing, test items: conducted radiation and power radiation testing. Do fcc doc form.

For LED luminaires with a power of more than 60W, the European standard needs to consider the EN 60968 standard.

The ballast testing standard is EN 61347

Lamps or inductive ballasts with inductive ballasts need to be considered for resistor winding durability testing (30 days for testing).

With the improvement of LED light source manufacturing technology and the widening of the application level, UL is committed to ensuring consumer safetyUL8750 has formulated the safety standard UL8750 for LED modules and lighting fixtures to standardize LED lighting products, and officially released it in 2009. This standard is a necessary safety specification for the industry to sell LED products to North America, and is applicable to all kinds of products with LED as the main light source, including lamps, bulbs, drivers, etc., in addition to safety specifications for LED light source lighting products in the future, it is necessary to verify the special attributes of LED light sources and modules.

In short, to do the certification of LED lamps, you need to first figure out the functional use of the product, input voltage, power supply and so on. Then look at the customer's requirements to see if there is a specified standard to do.

1. The applicant shall provide the product manual.

2. The applicant fills in the CE application form.

3. The laboratory determines the inspection standards and inspection items according to the product.

4. The applicant confirms that the two parties sign the contract and arrange to send the samples to the laboratory.

5. After receiving the sample, the applicant pays the testing and certification fee.

6. The laboratory conducts product testing, and the test is directly issued with CE certificate and test report.

7. At the end of the test, send the CE certificate and test report.

CE certification can be issued in 5-7 working days, the cost of CE certification is not fixed, different products for CE certification, different test items, different requirements, so the cost is also different. Specifically, it is necessary to provide product manuals to determine which instructions and which standards to do. Below I list the approximate cost of CE certification for reference only:

1.Electrical and electronic products: EMC (1500 yuan)2

Electrical and electronic products: LVD (1500 yuan)3Machinery & Equipment Products:

md (4500 yuan 12000 yuan)4Personal Protective Products: PPE (10W 15W)5

Medical device products: MDD (8W 15W)6Wireless Electronic Products:

red (3500 yuan 10000 yuan) 7Toy Category Products: EN71 (1500 3500 Yuan)8

Hardware and building materials products: CPR (5000 yuan - 8000 yuan).

The CE mark is a safety certification mark and is considered a passport for producers to open and enter the European market. ce(conformiteuropeenne)。All products can be distributed in each member state of the European Union** without having to meet the requirements of each member state, so all products can circulate freely within the EU member states.

CE is an abbreviation for the French Communateeuropeia, which means Europeanconformity in English, in fact, the European Community"European Community"The term was originally the English word EuropeanCommunity, abbreviated as EuropeanCommunity, and later changed to CE because the European Community is comunateeuropeia in French, comunitaeuropea in Italian, and comunidadeeuropeia in Portuguese.

The "CE" mark is a compulsory certification mark in the EU market, whether it is manufactured by enterprises within the EU or manufactured in other countries, in order to circulate freely in the EU market, if there is a "CE" mark, it must indicate whether the product meets the basic requirements of the EU directive on new methods of technical harmonization and standardization. In EU law, this is mandatory.

CE marking is one of the core of the European directive"Main requirements:", i.e. limited to products that do not harm humans. The Harmonized Directive sets out only the main requirements for the basic safety requirements that pose a hazard to the safety of animals and goods, rather than the general quality requirements, and the General Directive requires standard tasks. Therefore, the CE mark is a safety certificate rather than a quality certificate.

Warning lights are generally used to maintain road safety and are often used in police cars. Engineering. Fire trucks, ambulances.

Preparedness management vehicles. On-the-road maintenance vehicles. Traction car, A S car.

Development of machinery and equipment, etc. LED lamps produced in EU countries must be CE certified.

Handler: 1Communicate or interview with Lanya Line.

2.Entering into a contract.

3.Fill in the relevant information.

4.Sample delivery for inspection.

5.A report is issued after the laboratory test.

There are many specific tests of LED lighting, and the basic parameters are like, color temperature, color rendering index, beam negative, luminous flux, voltage, current total power, temperature, humidity and so on.

There are several kinds of equipment for testing temperature and humidity, such as: LED constant temperature and humidity test chamber, LED thermal shock test chamber, LED high temperature aging test chamber, etc.

LED constant temperature and humidity test chamber: equipment used to test the performance of materials in various environments and test the heat resistance, cold resistance, dry resistance and humidity resistance of various materials.

LED Thermal Shock Test Chamber: It is used to simulate the degree to which the test product can endure in the harsh environment of different countries or regions, and test the chemical changes and physical damage caused by thermal expansion and contraction under the condition of rapid change of temperature difference.

LED high temperature aging test chamber: used to simulate the assessment and determine the adaptability of electrical and electronic products or materials to storage and use under the environmental conditions of temperature, the working environment of the equipment at extreme high temperatures, and the working conditions of the equipment at the highest working temperature that can be tolerated.

Introduction of test items and corresponding products.

The CIE S025 E 2015B standard mentions the measurement of the electrical characteristics of LEDs, and LED manufacturers need to formulate the requirements for the measurement parameters of electrical characteristics according to the requirements of different customers and different products to ensure that the electrical characteristics of LEDs meet the requirements.

LED lamps and lanterns comprehensive safety and power measurement instruments.

Optical parameter testing.

Energy consumption test of LED lamps.