Seahorse car, can Cupid s brake pads be used on the Seahorse M3

How to maintain car brake pads.

Brake shoes, commonly known as brake pads, are consumables, which will gradually wear out in use, and must be replaced when worn to the limit position, otherwise it will reduce the effect of braking and even cause safety accidents.

Brake shoes are life-threatening and must be treated with care.

Most cars use the front disc rear drum brake structure, under normal circumstances, the front brake shoe wears relatively quickly, and the rear brake shoe is used for a relatively long time, and the following aspects should be paid attention to in the daily inspection and maintenance:

1.Under normal driving conditions, every 5000 kilometers of the brake shoe is inspected, not only to check the remaining thickness, but also to check the state of the shoe wear, whether the degree of wear on both sides is the same, whether the return is free, etc., and the abnormal situation must be dealt with immediately.

2.Brake shoes are generally composed of two parts: iron lining plate and friction material, and you must not wait for the friction material part to wear out before replacing the shoes. For example, the front brake shoes of the Jetta have a thickness of 14 mm, while the limit thickness of the replacement is 7 mm, including more than 3 mm of iron lining and nearly 4 mm of friction material.

Some vehicles have a brake shoe alarm function, once the wear limit is reached, the instrument will alarm to prompt the shoe to be replaced. The shoes that have reached the limit of use must be replaced, even if they can be used for a period of time, it will reduce the effect of braking and affect the safety of driving.

3.When replacing, the brake pads provided by the original spare parts should be replaced, only in this way can the braking effect between the brake pads and the brake disc be the best and the wear and tear should be minimal.

4.When replacing the shoes, a special tool must be used to push the brake cylinder back. It cannot be hard pressed back with other crowbars, which can easily cause the brake caliper guide screw to bend and make the brake pads stuck.

5.After replacing the shoe, be sure to step on the brake a few times to eliminate the gap between the shoe and the brake disc, resulting in the first foot without braking, which is prone to accidents.

6.After the brake shoe is replaced, it needs to be run in for 200 kilometers to achieve the best braking effect, and the newly replaced shoe must be driven cautiously.

Hello car owner, this needs to be dismantled to take a look,

Hello, when buying brake pads, tell him the model and year, I hope it can help you, I wish you a happy car [If you have a problem with the car, ask the car master. 4S shop professional technician, 10 minutes to solve. 】

This needs to be replaced in the repair shop, and if you can't replace it, you need to disassemble the rear brake hub to replace it.

There is no need to replace, the normal replacement is best less than one-third not less than 1 cm, adjust the handbrake does not need to be so expensive, 120 at most. Of course, you won't talk about it when you go to the 4S store.

The cheap ones are 78 ten, and the good ones are more than a hundred.

Just ask customer service.

Hello, the brake pads of the whole car of the Seahorse Cupid are generally around 210.

**Depending on the brand and quality, there are tens to hundreds of dollars.

Hello! Our ** is 80 yuan a pair, according to the purchase channel, different regions, may be different, it is recommended to consult the dealer to confirm.

Hello, the handbrake cable is not adjusted well, you can adjust it,

Hello, do you mean that the handbrake will be pulled up much higher now than before?

Because your brake pads were not replaced in time, the brake disc was worn by the alarm pads and grooves appeared. First run a few days to run in the brake pads and brake discs to accompany Changyun, if it is still ringing, it is Luliang your brake disc is uneven, remove it and grind it flat or replace it directly, it is very dangerous and annoying to be responsible.

Seahorse Cupid is designed by Italians, the shape is naturally good, I also saw this car in Xi'an Haida 4S store a while ago, Seahorse Cupid configuration is very good, Seahorse Cupid has a Mercedes-Benz engine, Cupid car and Volvo security system, this car design is also very user-friendly, and the price is not expensive. The 4S store I went to was good.

Haima M3 word-of-mouth - advantages|Cons|Fuel consumption - model reputation.

The score is higher than that of the same class.

Advantages: Stable atmosphere.

7. Fashionable and dynamic.

6. Comfortable seats.

4. Good sound insulation.

3. Plenty of power.

3 disadvantages: shock absorption problem.

9. Poor interior materials.

7. Poor comfort.

7. Excessive noise.

3 Noise Problem 2