What is a line of control in League of Legends? Why line control?

The role of the control line:

Most of the time in the early stage, each hero is fighting on their own line and leveling up. If you keep attacking normally at this time, and the line is pressed very hard, the lane will run very close to the enemy tower.

In this way, if teammates from other lanes come to help gank, the chances of successfully killing the enemy are greatly reduced. However, you have a high chance of being killed by someone else.

At the same time, if you find that your enemies are pressing a line very badly, be sure to take this opportunity and go to gank them.

Especially when there are stealth units on the enemy, the line of control is even more important. Try to keep the lane on one side of our tower to prevent the stealth unit from being gank in the early stage.

The line of control is to keep the creeps on their line under their own tower, which will cause great difficulty for the enemy to fight the jungle gank, and if the skill is comparable, the enemy must kill you by crossing the tower, he is very risky, and it is also convenient for the enemy to be very passive when they fight the jungle gank, which is these benefits.

If you don't control the line, the opposite jungler will easily gank you, if you die or return to the city, it will give the opposite economy or open up the gap with the enemy's experience, and it is not good to let the friendly jungler gank, and it is very likely that the enemy will not be able to kill the enemy but will be counter-killed by the enemy tower. That's the consequence of not controlling the line.

But don't be brainless in the line of control, and when you want to go home (i.e., you have residual blood after killing, or have been beaten and disabled), you must remember to push the lane back (push the lane under the enemy tower) to avoid your own tower being quickly pushed down by the opposite side. Pure hand hitting, looking.

Keeping the lane close to your own (such as under your own tower) allows you to replenish your troops in a relatively safe position, and also forces your opponent to enter a relatively dangerous position to make up for money, thus creating opportunities for gank and suppressing the opponent more. A master of lane control is often able to control the lane under his own tower or at the slope of the river.

The line of control is to control the line of troops in the position you want, such as pushing under the opposite tower to make it difficult for the opposite side to replenish troops, and it is also to control the line of troops close to your own tower, so as to facilitate our jungle gank

You will ask this question to prove that you are a novice, novices generally no one jungle does not need to control the line, the control line is to let the position of the two small soldiers fight in the position they want, for example, usually the line is afraid of being caught by the jungler, so let the line be close to their own defense tower, close to the defense tower There is a sense of security, and if you want to go home, you will push the line over, so that the opposite side will not have too many opportunities to demolish the tower city.

The line of control is to control the line of troops under their own tower, and the opposing reinforcement will be less afraid of the enemy jungler to gank, and the line of control is to ensure that the reinforcement can also create opportunities for the other side to fight.

The control line seems to be the position of the local creeps and the position of the local creeps on the control line, thinking that the opponent's hero's replenishment and growth, theoretically under the tower can kill a large number of enemy creeps and consume the skills and life magic of the opponent's hero.

Line of control refers to controlling the lane of troops, because in order not to be hit by seconds or enemy creeps, you need to control lanes.

The line of control is to control the position of the minions on both sides, usually to prevent the enemy from catching you in the jungle. In addition, you have the ability to take him, but he is too close to his defense tower, and you are not able to cross the tower to kill, so choose the line of control to control the line of troops on your side, so that if you kill him, he will not be able to run back under the tower.

It is to control the line of troops under their own towers, so it is convenient for them to make up their own knives, and it is better to make money to load, and if they want to replenish the knives on the opposite side, they will rush forward, which can better facilitate their own heroes gank

It's to master the line of troops, don't be beaten like a dog by others, and don't let the tower be breached....

When the creep has a lot of blood, it does not attack, only hits the creep for the last time to ensure that the soldier is replenished, and the troop line is controlled in a safe position to place the jungler gank

It's just that you don't keep crazy A creeps, and only make up the last sword, so that you can reduce the chance of being ganked, and it can develop well.

The control line in the security industry refers to the line of the control loop, which is relative to the main circuit. In general production equipment, there is always a main circuit and a control circuit. For example, a motor forward and reverse line, the main circuit is the line through which the large current passes, and the wire cross-section is relatively large, mainly through contactors, thermal relays, etc.

The control loop is a button, intermediate relay, control transformer and other small currents, wire cross-section selection of a relatively small circuit, with a small current to control the large current, to achieve the purpose of starting, forward, reversing, stopping and so on. If the control line is extended, the purpose of remote control can be achieved.

The control line is relative, and if an electrical appliance is not divided into a main circuit and a control circuit, there is no such statement. For example, a TV circuit is not carefully divided into the main circuit and the control circuit.

The control line, also known as the minimum admission control score line in the college entrance examination admissions, is delineated by the provincial enrollment agency according to the distribution of the college entrance examination scores of the candidates in the province in the current year and the enrollment plan of the province in the current year.

The so-called control line is the line from the light to the switch, the line is not charged when the switch is disconnected, and the switch is energized. The control line is generally the fire line. Most of today's lamps must be disconnected, otherwise some energy-saving lamps with vibrators will flash when the switch is turned off.

A control line usually refers to a line of a secondary circuit or a line of a control loop. For example, the circuit that controls the start and stop of the motor can be connected to electrical protection such as short-circuit protection, overload protection, undervoltage protection, and phase loss protection, or access to mechanical limit interlock protection, various instrument interlock protection, etc., as well as high-voltage relay protection circuits. The lines used for these circuits are all control lines.

It is also known as the minimum admission control score line in the college entrance examination admission, which is delineated by the provincial enrollment agency according to the distribution of the college entrance examination scores of the candidates in the province and the enrollment plan of the province in the current year. The provincial control line is the abbreviation of the "minimum admission control score line", also known as the blocking line and the provincial line. Generally, it refers to the minimum admission control score line of the corresponding undergraduate and junior college batches demarcated by the province (autonomous region, municipality) during the college entrance examination.

The provincial control line refers to the minimum score (total tolerance and deficiency score) standard for admitting new students determined by the provincial admissions department according to the level of the college entrance examination scores of all local candidates in the current year and the enrollment source plan issued by the state. Only candidates whose total score in the college entrance examination (including professional scores) reaches or exceeds this score line (usually referred to as "online candidates") are eligible to be accessed by the colleges and universities and selected for admission. The minimum admission control score is generally determined by major category and in batches.

Professional classes are generally divided into literature and history, science and engineering, as well as ** (arts, science), art (arts, science), sports (arts, science), etc., and each professional class is divided into undergraduate early approval, undergraduate first batch, undergraduate second batch and so on. The minimum admission control score for each batch of literature, history, science and engineering only stipulates the total score of culture, **, art, and physical education majors.

A control cable is a wire or cable that is used to transmit control signals in a circuit.

In electronic equipment, automation control systems, and various circuits, control lines play the role of connecting and transmitting control signals, enabling equipment or systems to be operated and controlled according to predetermined requirements.

The control line is generally used for the transmission and reception of control signals, and plays the role of connecting control elements (such as switches, buttons, sensors, etc.) and controlled elements (such as motors, lights, drivers, etc.) in the circuit. Through the control line, the operation of starting, stopping, adjusting and state feedback of the controlled element can be realized.

In a circuit, the number and type of control wires depend on the specific application. In general, the control cable can be a single conductor or a multi-core cable. Multicore cables typically contain multiple insulated wires, each carrying a different control signal.

Such a design can simplify wiring and connection, and improve the reliability and maintainability of the land fraud system.

Precautions for installing control cables

1. Wire selection: It is very important to choose the right wire. According to the specific application scenarios and needs, select the appropriate cable type and specifications. Ensure that the wire has sufficient conductivity and durability to withstand the required current and environmental conditions.

2. Line planning: Before installing the control line, it is necessary to carefully plan the line layout. Consideration is given to the length of the line, the direction, the connection point, and the power supply required. Avoid lines that are too long or too short, too bent or overstretched, so as not to affect the performance and life of the line.

3. Fixed installation: ensure that the control line is fixed firmly to avoid loose lines or pulled by external forces. Use appropriate fixing clips and brackets to fix the line in a suitable position to maintain the stability and cleanliness of the line.

4. Insulation protection: The control line needs to be well insulated to prevent safety problems such as leakage or short circuit. Wrap and protect with insulating materials such as insulating sleeves, insulating tapes, or insulating covers.

The lane is definitely unstable, and you can only hold it for a while. Due to the modification of Talent Hardening** and the modification of Armor Shoes, as well as the current pace of the game, the Ruthless Lane is not very desirable. The details should be said downstairs.,I didn't pay attention to it.,If you still have questions, ask me again.。

Don't replenish troops on the other side? It's okay if the opposite hero isn't in the push line, but don't cross the river. The upper and middle orders must have eyes.

If you want to push the line, push it under the opposite tower, and let the opposite defense tower kill the soldiers; Either you just make up for the last one and don't push forward.

That's the case, so when you place an order and an order, you have to take an eye to prevent gank, so if you keep pressing, there are pros and cons.

This requires the control line, you have to pay attention to the knife, not always A pawn, A last, the minions on both sides are each other's blood to the least, and the other party also mends the knife in this way, so the soldier line will not go forward. The purpose of the control line is to prevent the opponent from playing the jungle to gank, and generally the top single will try to control the line, and the middle single, there are many heroes who need a lot of push lines, so that the opponent's tower kills their own soldiers, the purpose is to grind the tower, so that the opponent is not good at mending the knife, less experience, and so on. Therefore, the control line of the upper order is very important, keep the line away from your own tower, try not to let the soldiers enter the tower, and carry the soldiers yourself for a while if necessary, to ensure that you are good at mending the knife, and also to protect the tower.

It's certain that the lane will be pushed forward, but you don't need to keep the lane on your side all the time, but to control it in different periods. Generally speaking, because of the presence of artillery carriages, you can't control the line forever, and you can only maintain a few waves of soldiers. In addition, don't bring soldiers into the tower, and block it with your body when you are fast entering the tower.

You can hold the lane as much as you want for a while, but you can't let too many creeps too.

At this time, you must be careful that JG on the other side will come to Yue Tower to kill you, and a good vision is the king.

It depends on your skills, if you want to control the line, there are two ways, one: when the minions' blood is extremely low, then make up the knife, and it is best to give priority to the opponent's creeps who are set on fire by their own creeps. I'm talking a little complicated, but if you think about it, you can understand what it means, the lane is pushed over, it's nothing more than your damage plus the damage of the creep is greater than the damage of the opposing hero to the creep plus the damage of the opposite creep, and the lane will naturally pass, how to reduce this damage, that's what you have to do.

The first point is to make up for the knife when the creep's blood is extremely small, rather than when you can make up for the knife, which reduces your own damage to the opponent's creep, and the second point is to give priority to the creep that is set on fire by the opponent's creep, so that when you make up for the knife, you will find that sometimes when you make up for that creep, your own back creep has already shot, that is to say, the back row creep is equal to one less attack, which also reduces the damage of your own creep to the opponent's creep: two: If you can't control the line, Push the line over with speed and push it under the opponent's tower.

Let the opposite tower output. Bring the pawn back.

If you want to control it for a long time, you can only give up some soldiers and not make up for it.

This is the gap with DOTA, and I can't control the line.

The control line recommends the knife girl, the broken soldier line recommends alchemy, and you will know if you play more.