An overview of the warning lights and beep reminders of the Ethereal MC model

When the ignition is in the "on" position, the main warning light illuminates whenever one of the following warnings appears on the vehicle's information display.

No key detected.

The key ID is incorrect.

Please switch to P mode.

Please turn off the ignition.

Please disengage the parking brake.

Fuel is too low. The level of the cleaning solution is low.

The doors are open.

The suitcase is open.

Doors and trunks open.

CVT error.

Wrong headlight system (e.g. equipped).

The oil pressure is too low.

Key registration is complete.

If the tire pressure is low, inflate it (if equipped).

TPMS errors (e.g. equipped).

When in transport mode, press the cut-off switch.

Puncture Failure of the smart key system.

Auxiliary parking radar error (if equipped).

Failure (e.g., equipped with driver assistance).

<> When the ignition switch is in the "ACC", "OFF" or "LOCK" position, the safety indication hill light flashes. This function indicates that the safety system equipped on the nuclear vehicle is normal.

If the safety system fails, the indicator lights up continuously when the ignition is in the "on" position.

This setting allows <> users to set up alerts.

1.Press the switch in the image below until the settings menu appears.

2.Use the Up Down switch to select "Alarm" and press Enter.

Outside temperature. This setting allows the user to enable the deactivation of the low temperature alarm outside the handcar on the vehicle information display.

1.Use the up and down switch to select "Outside Temperature".

2.Press Enter to turn on and off the outside temperature on the vehicle information display.

This setting allows the user to set an alert notifying the driver that the set time has been reached.

1.Use the Up Down switch to select Timer Reminder.

2.Press Enter.

3.To change the value of the timer, use the up and down switch and enter to save the selected time.

1.Use the up and down switch to select Navigation.

2.Press Enter to turn on and off the alert.

If you open the driver's side door when the headlight switch is in the following two positions and the ignition is in the "ACC", "OFF" or "LOCK" position, the headlight reminder buzzer will sound.

When <> leaving the vehicle, be sure to turn the light switch to the "off" or "auto" position (if equipped).

Close all doors, apply the parking brake, fasten your seat belt, and put the ignition in the "closed-up" position to burn, but do not start the engine. The following lights will light up:

<> the following lights (such as equipment) will briefly light up and then turn off:

<> If any of the lights do not light up or do not work as described, it may indicate that the bulb is burned out or the system is malfunctioning. Please immediately go to the Dongfeng Nissan franchise store to inspect the system and repair it if necessary.

Certain indicators and warnings are also displayed on the vehicle's information display.

When the speed exceeds 15kmh (9mph), the buzzer will sound unless the front seat belt is firmly fastened. The buzzer will continue to sound for about 90 seconds until the seat belt is fastened.

<> when the ignition is in the "on" position, the charging warning light is on. After the engine starts, the charging warning light goes off. This indicates that the charging system is working properly.

If the charging warning light is on while the engine is running, or while driving, it may indicate that the charging system is not working properly and may need to be repaired.

While driving, if the charging warning light is on, please stop safely as soon as possible. Please turn off the engine and check the alternator belt. If the alternator belt is loose, broken or missing, the charging system needs to be serviced.

If the alternator belt seems to be working properly, but the charging warning light is still on, please go to the Dongfeng Nissan franchise store immediately to check the charging system.

It should be noted that:

If the alternator belt is loose, broken, or missing, do not continue to drive the vehicle.