How to connect to the wireless network of the telecom optical modem ZTE F660

Hello, first of all, thank you for your support to China Telecom. According to your description, the telecom optical modem ZTE F660 does not have a WiFi function, and it needs to be connected to a wireless router to achieve the WiFi function. Hope mine can help you.

Now Guangdong Telecom mobile phone ** engage in telecom 517 activity this event beautiful machine, number card 1 fold seckill, the lowest in the year, 100,000 copies of Xiaomi wifi purchase machine send, purchase and send 50 yuan phone bill one-time arrival, 517 activity during the mobile phone ** decline, ** tariff discount is low, double "down" together, ** amplitude comparable to first-line e-commerce.

If you need to buy a telecom mobile phone, you can log in to China Guangdong Telecom mobile phone**, many** mobile phone discounts, contract plans and more valuable phone bills. If you want to know more, welcome to Guangdong Telecom to know the platform to ask questions, and there will be more professional customer service to answer for you.

If you still have any questions, please consult Sichuan 10000 to know.

1.Enter the IP address of the router in the browser.

Enter the router password to log in to the router.

2.Select Web Surfing.

settings. 3.Select a static IP address

The IP address is set to Subnet Mask.

Set to, Gateway set to, and finally set local DNS.

4.Select the Wireless Settings tab, turn on WiFi, and set up your wireless network.

name and password.

5.Click on the AdvancedSettings tab, select Intranet Settings, and change the Lanip address to.

6.After saving the settings, connect the router to the fiber modem, and the wireless network of the telecom optical silver scrambling fiber modem is set up.

1.Enter the IP address of the router in the browser, enter the router password, and log in to the router.

2.Select the settings for web surfing.

3.Select Static IP, set IP address, subnet mask, gateway, and finally local DNS.

4.Select the Wireless Settings tab, turn on WiFi, and set the name and password of the wireless network.

5.Click on the AdvancedSettings tab, select Intranet Settings, and change the Lanip address to.

6.After saving the settings, connect the router to the Fiber Modem, and the wireless network of the Telecom Fiber Modem is set up.

You connect the line and then open the web page with the account password.

1. Enter the back interface.

2.Open Network - Broadband Settings.

3.Find your local VPI VCI connection in the connection name. Yinchuan is 8 35, and the picture below is to Shenzhen. Guangzhou, for example).

4.Select your local VPI after the VCI connection. dot Delete Connection. (Note: Delete your local VPI VCI that will not be able to dial in with a computer after the connection.) Deleting this connection is the basis for setting up the route below).

5.After deleting the connection. A new connection is made.

Carrying services on the Internet (enabled).

Mode route (PPPoE).

Use NAT to enter your account and password for surfing the Internet.

OK 6Manage --- device management --- device restart.

7.The following steps start configuring the DHCP service, which allows you to limit the IP address to control the number of computers connected to the Internet.

If you want to turn on the wifi function of the modem, you must enter the modem according to the super password and set it to use, you can query your modem password and enter the wireless network after setting. Click on the "official address" below to get more services, and the customer service number 324 will answer for you.

To enter the optical modem, change the bridging mode to the routing mode.

In addition to the ITV interface, the rest of the LAN interfaces can be connected to the router, connect to the WAN interface of the router with a network cable, and connect the computer to the LAN interface of the wireless router with a network cable, and then log in to the router with the computer to set the network parameters.

Telecom Broadband Cat Connect Wireless Router, set it up according to the following method::

1. Plug in the wireless router, don't connect the cat first, and connect the computer to any LAN port of the wireless router;

2. Enter the gateway address of the router (on the label behind the router) in the address bar of the browser, and enter the login username and password to enter the settings page;

3. Set up according to PPPoE (ADSL virtual dialing), enter the Internet access and password;

4. Set the SSID, encryption method and password;

5. Save and restart;

6. After setting, connect the network cable from the cat LAN port to the WAN port of the wireless router.

Summary. 1. Whether you use optical modem dialing or bridging, you must select IPv6 in the dialing or bridging settings.

2. Set the acquisition of IPv6 address in the dial-up interface to automatic, no need to set the IPv6 interface separately, after the dial-up is successful, a dial-up interface 6 will be automatically generated, if you can see IPv6-PD in this interface: *Then the later setting is simple.

3.Disable the use of built-in IPv6 for WAN ports and LAN ports. Set the IPv6 Route Advertisement Service and DHCPV6 Service to Server, set NDP ** to Disabled, and set DHCPV6 mode to Stateful + Stateless.

How to set up dialing for ZTE 650 Telecom optical modem.

1. Whether you use optical modem dialing or bridging, you must choose to set the acquisition IPv6 address in the dialing interface to automatic, no need to set the IPv6 interface separately, and a dial-up interface 6 will be automatically generated after the dialing is successful, if you can see IPv6-PD in this Kaixiao cavity interface: * Then the later setting is simple. 3.

Disable the use of built-in IPv6 for WAN ports and LAN ports. Set the IPv6 Routing Advertisement Caution Service and DHCPV6 Service to Server in the LAN port, set NDP ** to Disabled, and set DHCPV6 mode to Stateful + Stateless.

Turn on the default is off, in the basic settings of the firewall in the network settings, click on the back of the wan---reject, and select IPv4 and IPv6 in the advanced settings. Restart the router and terminal. 5. Enter in the browser to see if the liquid has been successful.