How is it that the big pool of the bath is always seeping? Urgent which prawns under the guidance

Isn't the women's part seepage? Isn't it the same engineering?

Find the leak first, then mix it with epoxy resin and brush it from the inside, or apply it with glass glue.

Ruifeng Industrial Company Tengda waterproofing agent can be directly used on the surface of ceramic tiles, and the active ingredients can penetrate into the tiles to form a waterproof layer, and the waterproof period is the same as that of the building.

Isn't that just living, brushing waterproof paint.

Use CF-2000 high-efficiency composite waterproofing agent at your bottom and pool after scraping 5 mm will no longer leak.

This is the method used to block the project with cement, sprinkle a little water on the dry cement, drill it by hand and slowly loosen it by itself, and put it into the place where the leakage needs to be plugged and smashed hard.

Brush waterproofing, then plaster with cement; Also, after doing the waterproofing, then paste the tiles.

To know how to solve the problem, first of all, to understand why the problem occurs, what causes it, but your expression of this problem is not very clear, there are two kinds of guesses, one is, cement and sand, in the place of water leakage, after the problem can not be used, such a problem, cement is not usable, re-purchase, there is no problem with sand, there is a kind of construction, in the cement sand (called concrete grouting) where there is a water leakage, such a problem, most of the problems are caused by the cement is not up to standardIn between these two situations, it is a better way to fill with the "super plugging king", and it is very convenient to buy! The construction is also more convenient, and there are also construction instructions above!

It is safest to fill the small mouth with waterproof paint and other completely dry it, seal it with glass glue on the edges, and then fill it with cement.

Just plug it with waterproof mortar or cement sand!

That is, there is no best waterproofing If it is a cement pool, you can do it twice waterproof.

You can use waterproof to plug the leakage of porcelain cylinder mud, just once, and it is not expensive, simple and practical, and you can do it yourself.

Look at you, you're playing big.

Cement is not waterproof.

Small pools should also be professionally waterproofed.

Hehe, contact me if you have any questions.

As long as the concrete pool leaks water, it is easier to deal with, and the brick pool is more troublesome to deal with, and free professional technical consultation is provided for concrete waterproof leakage repair.

..What the pool is made of, and where it leaks, this has to be made clear.

There is also a layer of asphalt or something, please do not complain if you are not professional.

Anyway, the asphalt is not expensive, although it smells bad.

I don't know if you can apply that waterproofing paint to a wall that has already been coated with asphalt, and I feel that it is safer to do so.

If you find an anti-seepage company or a plugging company, there will be a special appropriate testing instrument, and the humidity of the leakage surface can be detected through the instrument after the closed water test, so as to obtain the trend of water flow and the leakage point.

Same question. How did the landlord solve it in the end? Teach me, thank you!

There are specialized testing companies. You can ask them to do it.

If you don't say how to leak the method, people can only guess for you, don't do engineering, and provide free professional technical advice on concrete waterproof leakage repair.

To find the place of water seepage in the bathroom, and then waterproof it.

1.You can go to the building materials market or hardware store to buy a small bag of waterproofing agent, in fact, the high-grade cement is pre-mixed with very fine quartz sand, or buy white tile caulk, the appearance is the same as white ash, 10 yuan a kilogram of small bags;

2.Both are similar in terms of usage: mix them with water to form a sticky paste and rub them over the gaps. Finally, use the index finger to hook it, and then stick it to the tile next to it to dry and wipe it off with a dry rag;

3.After a little waiting, the water gradually decreases and there is no need to repair it. The trend is not reduced, continue to fill in the maintenance, seriously suppress and test the water, and only after determining can the wall or ground be restored;

4.If the repair still does not solve the problem of water seepage, you need to remove the tile from the damaged waterproof at the door (you can extend inward to remove a few more pieces) and re-do the waterproofing. Then do a 24-hour water storage test, and the water storage height is 20 30mm at the most.

If the inspection is qualified before the tiles can be laid, pay attention to the new waterproof layer must be protected in the paving process, so that the secondary water storage test can be avoided. However, if the water storage test finds that the waterproof layer is still leaking, then the bathroom floor must be scraped off and all waterproofed again;

5.Thorough solution: remove the floor tiles and the bottom layer of wall tiles, remove the floor tiles to expose the original ground, use two-component waterproof mortar to do, and then do a 24-hour closed water test after doing a good job to check whether there is water leakage downstairs, and continue to do it until there is no water leakage if there is a problem.

That's because the waterproofing is not done well, to do it from scratch, it is more troublesome, if there are tiles to knock off the tiles and do it from scratch. Find a renovation company to see if the water pipe is leaking.

Find a professional to repair and fill the gap.

An aquarium fish tank is a container for water, and it is generally large, a fish tank with a length of 120 cm can hold more than 200 liters of water, and its weight is more than 200 kilograms. If something as heavy as this leaks, it can be very dangerous, not only harming the aquarium creatures, but also causing people trouble.

"The 7,000-yuan fish tank suddenly leaked, and the fish that cost more than 30,000 yuan died directly in the morning. Mr. Li, a citizen, encountered such an encounter. He said that he bought a total of 6 fish tanks, and after using them for more than a year, 4 of them have broken down, and this time the consequences are the most serious.

In the conference room of Mr. Li's company, an office building on Fuzhou South Road, there are 6 fish tanks, and 5 of them have at least one arowana swimming around, which looks very beautiful under the illumination of the lights. 

The lid of the light tube on the top of the cracked and leaky fish tank has been opened, and the water inside is gone. The tank is about a meter long and topped by a glass part that holds water, with a height of about 60 centimeters and a width of about 50 centimeters. Underneath is a black cabinet with a pump and heater to keep the water in the tank circulating.

Mr. Li said that the pipe under the tank of this fish tank cracked directly, and half a ton of water ran out, causing the Arowana to die of lack of oxygen. 

The Arowana that died due to lack of oxygen was placed next to it, Mr. Li said that this is an authentic red Arowana, which was bought and raised for more than a year, and now has a length of 57 centimeters, and a merchant bid more than 30,000 yuan, but he did not sell it. 

So what should we do if the fish tank is leaking? First of all, there are several situations of fish tank leakage: one is that the joints of the fish tank are glued, and water seeps out or leaks.

This situation is more common and it is also the slightest kind of water leakage, but it is very troublesome, and the fish tank will continue to flow outward, making the surroundings wet. If this happens, you can't sit idly by, and you need to fix it in time to avoid the leakage from expanding. To repair such a fish rainbow, we must first figure out the leakage, and then remove the fish and other things in the tank, put the water clean, and after the fish tank is dry, use a glue gun to pour the glass glue into the leakage point, and then coat 1 layer of glass glue on the outside, and the fish tank can be used after 1 day.

If the leakage of the fish tank is very slight, and the tank is inconvenient to move, you can also use glass glue to repair it outside, and apply the glass glue from the outside to the leakage until it does not leak. Although this method is convenient, it can only be used for very minor water leaks, and serious water leaks must be kept dry before they can be repaired. 

Another type of leakage is the appearance of cracks in the glass, which is mostly caused by the collision of the glass This crack is very dangerous, if not treated in time, it will cause the fish tank to burst. The only way to deal with it is to dry the fish tank, coat the cracks with glass glue inside and out, seal them, and preferably stick a glass on the outside. Of course, this repair will affect the aesthetics of the aquarium, if it is acceptable on the inconspicuous back or side, if it is on the front, I am afraid that the fish tank will have to be scrapped.

Such a sticky fish tank is not very reliable, if it can be replaced, it should be replaced in time. 

Pool leakage treatment method:

1. Plastic pool: find the leakage point, roast it with fire or repair it with plastic electric welding;

2. Ceramic pool: use AB glue, and then paste a layer of waterproof tape at the leakage point;

3. Cement concrete pool: find the leakage point and paste it with polyester tire waterproof membrane or dry powder waterproof material (plugging king) to repair it.

Wash the leaking area, wipe it dry, and wipe it with quick-drying waterproof cement

Plugging king glass glue can be, what is the key part.

Just change it to one that doesn't leak.

2. For the cracks that are competitive and seepage, plugging measures should be taken. The principle is to change the large leak to a small leak, the line leak to a point leak, and the piece leak to an empty leak, so that the leakage is concentrated at one or several points, and finally blocked. The commonly used plugging material is coagulant mortar, that is, an appropriate amount of coagulant is added to cement slurry or cement mortar (at present, the commonly used coagulant is mainly water glass, and a certain proportion of copper sulfate and potassium dichromate are added).

For the plugging of leaks without strength requirements, it can also be treated with coagulation materials such as cyanide slurry and propylene slurry.