Why does the Apple 6splus screen fail and press the power button to re wake up the screen before it

Maybe it's just that the inner screen is a little out of order.,Go fix it.。

Summary. Kiss! Glad to serve you! I'm Daxin, please wait patiently for 2 minutes, I'm sorting out, I'll answer for you right away, and please don't end the consultation!

Kiss! It's a pleasure to serve you! I am Daxin, please wait patiently for 2 minutes, I am sorting out, and I will answer your hail letter immediately, please don't end the consultation!

Hello dear! There are two reasons, one is because of frequent friction (such as always putting and taking out of the pocket of the trousers) and generating static electricity, so that the touch screen fails, so it is good to wipe it with the judgment hand. The second is that the screen is broken.

Dear,In this case, it is recommended that you upgrade to the latest version first.,If it's already the latest version.,It's recommended that you erase it.,And then try to start it again.。 If the problem persists, it is recommended that you go to the after-sales service to test it.

Hope mine is helpful to you!

After the Apple 6splus screen failed, pressing the lock screen button returned to normal for the following reasons:

1. The keys are stuck (press the keys one by one, whether each button has elasticity).

2. The keyboard is wet and leaks (cleaning and drying the machine board).

3. The protection elements of the longitudinal and horizontal lines of the keyboard and the anti-interference capacitor leakage and short circuit (determined by measuring the resistance to the ground or the voltage of the keyboard contact).

4. Caused by the failure of the clamshell control circuit.

5. CPU virtual soldering or bad (replanting, replacement).

6. The machine board is disconnected.

I'm like this a lot in 6s, just get used to it.

Normal System or software issues.

Generally, the machine is stuck, or the screen is dirty.

1. Apple 6splus screen bai

Malfunction. Second, the specific solutions are as follows:

1. The first thing to do is to restart your iPhone6 and press the "Sleep Wake" (also known as the power button) and the Home button at the same time until you see the Apple logo displayed on the screen.

2. Some users solve this problem by selecting "Settings" - "General" - "Reset" - Reset All Settings. The user will need to re-enter the password, change the wallpaper, and reset the Touch ID, but the user's data will not be deleted.

3. Users who encounter iphone6 6 plus touch screen failure also solve the problem by restoring factory settings, but all the information on the phone will be lost, so users need to back up the important data in the phone in advance. After that, users may need to set up their iPhone 6 like a new phone, and some users say that restoring backed up data from iTunes or iCloud will cause this problem to reappear.

Workaround:

1. Don't let the phone turn off:

As long as the power is not turned off, the failure of the power button will not affect the use, but you need to be careful not to let the phone automatically shut down due to too low power, so you need to charge it as soon as possible when the power is low, or equip it with a backup power bank.

2. Replace the power button by yourself

If you feel that the above methods are not very convenient and need to be shut down frequently, then you may wish to change the power button, if it is still in the warranty period, then you can directly take it to Apple's after-sales point for warranty. However, because it has been on the market for a long time, I believe that many friends have passed the warranty period, so they generally need to be taken to the repair point to pay for maintenance, and if you have a strong ability to do it yourself, you can also replace the power button by yourself.

Just change the boot key cable **The cost is about 30, but the replacement is more troublesome, it is recommended to find a maintenance master to replace it, and the estimated replacement cost is about 50-100!

If you can't open it, you can only go to the mobile phone store to have a look.

First rule out the cause of the software system:

Back up your data, factory reset, if it's still like this, it's not a problem with the system, it's a hardware reason.

Possible hardware causes:

1. Damaged or inferior screen film; Use the film after removing it and observe if it still fails;

2. Static electricity accumulated on the screen; Eliminate static electricity to see if it still fails;

3. Poor contact of touch screen cables; Disassemble the machine and reinsert the cable;

4. Damaged touch screen - disassemble the machine for repair or replace the screen;

5. The touch IC on the motherboard is soldered or damaged - disassembled for repair.

When it comes to maintenance, you must go to the official after-sales service in the warranty.

1. If you have this problem with your iPhone, you can apply pressure on the screen or twist the device, which seems to be able to temporarily improve the situation.

2. If your phone is still under warranty, you can go directly to Apple's official after-sales service.

3. If the phone has passed the warranty period, then you can only seek help from a third-party repair shop, and they will help you replace the touch control chip, because Apple's after-sales personnel cannot replace the logic board or touch screen controller chip for us.

1. Some iPhone6 6Plus users reported that they encountered failures in the display and touch function, but even if the entire screen is replaced, it may not be completely repaired.

2. Usually at first, it only appears at the top of the screen with a pattern strip, but over time, the anomaly sometimes suddenly affects the bottom of the screen, and even the touch fails and the device response becomes worse.

3. The problem of abnormal screen is also said to be related to the distant iPhone6 6Plus "breaking the bent door".

The legendary mobile phone will also fail junk phone junk producer what else to say about the sapphire screen how not to get on the sapphire screen.

Hurry up and return the goods, otherwise you will bear the loss.

Now what is Apple doing to be out of stock, really.