How to import the mobile phone card of an Android phone into an Apple phone

To import contacts to SIM card, please operate:

Card to phone: Contacts - More in the upper right corner (three buttons in the upper right corner) - Settings (settings) - Import Export Contacts - Import - Import Contacts **Select SIM Card - Save Contacts to Device - Select Contacts to Import - Done;

2.Phone to SIM card: Contacts - More in the upper right corner (three buttons in the upper right corner) - Settings (settings) - Import Export Contacts - Export - Export Contacts to SIM Card - Select the contacts you want to import - Done.

It's a nice thing to change your phone, you can simply import your contacts to your new phone, and you know how to simply import your Android contacts into your iPhone? Let's take a look.

Turn on step-by-step reading mode. How it works:

Use the cloud drive to import the contacts to the Mac:

Log in to the cloud drive on your Android phone and back up your contacts.

Log in to the cloud drive on your iPhone and restore your contacts.

Use QQ Contacts to import contacts to Mac:

Install QQ Contacts on your Android phone and select Backup Contacts.

We may encounter this situation when using a mobile phone, if we need to change our mobile phone, the address book saved on our mobile phone also needs to be converted. At this time, how do we import the contacts of the Android phone to the Apple phone, the specific method is as follows.

Turn on step-by-step reading mode.

Tool material: OPPO R9M

iphone8plus operation method.

First we open the page of the mobile, find "Settings" and click on it. (We need to find out the Android address book).

In "Settings", find "Ben", and its position is close to the bottom middle.

Then select Import Export Contacts, and click to enter the page.

Click on "Export to Storage Device".

At this time, the system will prompt "Do you need to export?", then generate a VCF file, and click OK.

Remember the location where you exported (which specific location exists), find the VCF file you exported, and send it to your iPhone by sending it to QQ and other means.

Then receive it on your iPhone and select the file "Open with another app".

At the end, there will be a prompt, "Confirm whether to import contacts from the vcard file.""and click Confirm.

Special Tips. Note that when importing and exporting, you need to pay attention to the path of the file export, otherwise you will not find the file.

If you are using a Huawei phone, you can do it by doing it here:

1. Please make sure that the card you are using matches the device.

Please use a standard nano-SIM card and an ultra-micro memory card (NM card), inserting a non-standard card may cause the card tray (slot) to be damaged or the device cannot recognize the card.

2. Take out the card tray and identify the front and back.

Remove the tray by taking the card pin.

The side marked with the character "sim1" in the card slot is the front, and the nano-SIM card can be placed in the corresponding card slot;

The side of the card slot marked with the character "nm" is the reverse side, and nano-sim or nm card can be placed in the corresponding card slot on this side.

3. Put the card into the corresponding card slot.

The card chip is side up, first insert the notched end of the card into the card slot, after it is placed in place, the card will be clamped by the spring at the front of the card slot, and then the card tray can be flipped to place the card on the other side in the same way.

4. Insert the card tray into your phone.

After the card is loaded into the correct card slot, place the card tray and the phone front facing you, keep the card tray and the card on the same plane, and insert the card tray.

5. Precautions and instructions.

Please note that the ultra-micro memory card (nm card) can only be placed in the card slot on the reverse side of the tray, otherwise the device will not recognize it. If you accidentally put it wrongly, please take it out and re-place it, it will not cause damage to the equipment, please rest assured to use it;

When using the card pick-up needle to pick up the card, please pay attention to distinguish between the microphone hole and the SIM card hole, and do not insert the card pick-up pin into the microphone hole. If you mistakenly poke the pickup pin into the microphone pickup, don't worry, because the microphone pickup hole adopts a 90-turn foolproof design, the pickup pin will not poke into the inside of the phone and damage your phone, please feel free to use.

It mainly depends on what kind of mobile phone it is, and the SIM card slot is designed to the side of the mobile phone.

It should be noted that to open the SIM card slot of the mobile phone, you need to use a card pin, which will be given away randomly when you buy a mobile phone. Holding the needle holder, insert the tip of the needle into the small hole on the right side of the card slot, push it in a little harder, and the card slot will pop out. Because Xiaomi has designed the two card slots together, you will see a card tray with a dual row of card slots, in which the card slot near the outside is the micro SIM card slot, which is the same size as the card slot of the iPhone 4 4S, and the other card slot near the inside is the Nano SIM card, which is the same size as the card slot of the iPhone 5 5S and iPhone 6.

If you have used a regular SIM card before, you need to cut the card to the same size as the card slot, and then install it, and be careful not to hurt the SIM card chip during the operation. Of course, you can also go to the mobile business hall and ask the customer service staff to help you cut the card, which is free.

1. First turn off the mobile phone.

2. Then use the card pin to take out the mobile phone card tray. 3. Then put the phone card on the phone card tray.

4. Insert the card tray with the mobile phone card back into the mobile phone. 5. After the mobile phone card is inserted, open the mobile phone for networking settings.

It is generally inserted from the side.

The way the iPhone imports the **number to** card is as follows:

1. Open the "Settings" that comes with your iPhone.

2. Open "Contacts" in the settings;

3. Click "Import SIM card";

4. Wait for the system to be imported;

5. After the import is successful, when we insert the SIM card into other mobile phones, the **good or bad number can also be imported into other hand socks and laughing machines. <>