What are the hazards of increased engine oil, and will increased oil in automobiles harm cars?

The engine oil increases, and most of it is not the engine oil but gasoline and water vapor, and the engine oil is easy to emulsify and deteriorate, causing wear and tear and even pulling the cylinder. In addition, there is too much oil, and the engine becomes heavier.

Hello, the increase of automobile oil will cause the internal oil pressure of the engine to be too high, the engine wear will be aggravated, and it will also cause the increase of fuel consumption, that is, the consumption of fuel. If you don't add oil, it may be that there is a problem with the quality of the oil you used, or other liquids are mixed in, and it is recommended that you check and repair it as soon as possible.

The increase in oil will lead to an increase in oil pressure, which will cause the engine oil seals to be broken by high pressure, and eventually the oil seals will leak.

It will cause a decrease in power and an increase in fuel consumption.

2. The amount of oil entering the combustion chamber is greatly increased, which increases the carbon deposit in the combustion chamber, increases the piston movement resistance, and reduces the engine power.

3. Environmental protection is not up to standard.

It will worsen the exhaust emissions, seriously affect the life of the three-way catalytic converter, and may even directly damage the three-way catalytic converter.

4. Oil leakage.

Reduced oil seal life, which can lead to engine oil leakage.

The hazards of increased engine oil are: 1. When the engine is working, each part will stir, which will increase the loss of internal power of the engine; 2. Increase the amount of oil splashed on the cylinder wall, resulting in the failure of the burning oil; 3. The oil pressure will increase, resulting in poor operation of the internal parts of the engine and affecting the power output of the engine. The treatment methods for increased oil are:

1. In a low-temperature environment, heat up the car and run at high speed, so that the engine can reach sufficient temperature conditions to evaporate the gasoline or water mixed in the engine oil; 2. Ask professionals to conduct in-depth professional inspections to find the source of the fault.

If you add too much oil, it will cause the engine speed to rise very slowly when accelerating, which is caused by the increase in internal motion resistance caused by the split orange. Increased resistance to internal movement leads to higher fuel consumption of the vehicle. Adding too much oil may also damage the three-way catalytic converter.

If there is too much oil, the engine will produce violent agitation of various parts when it is working, which not only increases the loss of internal power of the engine, but also increases the amount of oil splashed on the cylinder wall, resulting in the failure of burning oil. Therefore, car owners should always pay attention to the oil warning light on the dashboard, and the oil should not be too much.

Too much oil is like eating too much at dinner. For example, when we are eating a buffet, we eat hard in order not to lose money, and after eating, our stomach is bloated, and we feel like we can't walk. If the oil is added too much, the oil pressure will increase, resulting in poor operation of the internal parts of the engine, affecting the power output of the engine, so the power will be insufficient.

If we find that the car is boring after maintenance, it may be that the car repairman has added too much oil. (Photo by Huang Guihong, Pacific Automobile Network).

First of all, think about eating too much will make you fat, too much sun will darken you, and overuse your eyes will make you short-sighted. A lot of things need to be moderate, not all more can achieve good results, and achieving a balance is the best state.

Let's take a look at the role of engine oil: reduce wear, assist in cooling, protect the engine, reduce emissions, prevent rust and corrosion, and absorb shock cushioning.

In the end, what will happen if the engine oil is added, which will lead to insufficient power output of the engine, increased idle noise, and increased fuel consumption, which will seriously damage the engine; It will accelerate the wear of cylinders and pistons, thereby reducing the service life of the vehicle; It is easy to burn and exhaust the engine oil failure, which aggravates the carbon deposit in the combustion chamber.

When filling the oil, there will be a scale mark to measure to ensure that the oil volume is in the normal capacity, which means that when the oil level reaches between the two scale marks, the filling will be stopped, and the oil volume at this time is normal. However, many people do not pay attention to the situation of adding too much engine oil, and think that it is not too serious; Some people think that it is very cumbersome to add engine oil for a period of time, so it is better to add more oil at once to reduce the time of adding oil; I even think that adding more oil is a kind of protection for the car, but I don't know the seriousness of too much oil for a long time

For engines, oil can be used as a lubricant, as a coolant, as a sealant, as a cleaner, as a rust inhibitor.

1. Therefore, for the engine, engine oil is indispensable. When there is too much oil, the engine will produce violent agitation when it is working, which will not only increase the loss of engine power, but also cause the cylinder wall to be stained with oil, resulting in the failure of burning oil and reducing the service life of the vehicle 2. It will accelerate the wear of the cylinder and piston and reduce the service life of the vehicle. 3. Not only does it have no good effect on adding engine oil, but it also reduces the service life of your car while increasing the cost of refueling.

Therefore, in order to improve the service life of our car in the future, we should pay attention to the scale on the oil scale when adding oil, and it should be added to the middle of the offline line and the upper line, and do not blindly add more engine oil.

If more oil is added to the engine, it will affect the engine. It will severely damage the three-way catalytic converter. It can also lead to a loss of oil in the engine, which will reduce engine power and cause more unwanted crankshaft rotational resistance, which can affect power

Too much oil can reduce engine power. When the engine is running, the big end of the crankshaft and the connecting rod will move quickly. At this point, too much oil, cranks, and connecting rods will produce strong agitation.

The crankshaft handle and the engine oil rod will consume a certain amount of energy, which is not visible in reducing the output power of the engine, and will also increase fuel consumption. In addition, the vehicle will appear due to the excessive reduction of the engine oil. sinks, is opaque and adds noise.

Too much oil can cause blue smoke in the engine exhaust pipe. Too much oil, the fast movement of the crankshaft crank, and the large end of the connecting rod inevitably lead to oil splashes. A large amount of splashed oil will enter the combustion chamber, which will result in the exhaust emission of blue smoke, the "burning oil".

The amount of oil entering the combustion chamber increases significantly, which increases the deposition of carbon in the combustion chamber, increases the resistance of piston movement and reduces engine power.

Environmental protection can not meet the standard: the deterioration of exhaust emissions seriously affects the service life of the three-way catalytic converter, and even the leakage may directly damage the three-way catalytic converter. Oil Leak:

Shortens the life of the engine and can lead to oil leaks. Engine oil is vital in a vehicle, and even more so. Engine oil is a lubricant necessary to ensure the normal operation of the engine, and its specific function is to lubricate metal parts, reduce friction between parts, eliminate the heat generated by the engine during operation, and clean the fine metal chips generated after wear.

and sealed. Absorbs effects such as vibration, rust, etc. It's best to keep the oil between the lowest and highest oil level scales for brightness.